1967 GMC - SWB, great patina - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**WorldsCrappiestTruck** · Yesterday, 10:08 PM

After nearly a decade of watching this C10 sink lower and lower into the dirt, I recently picked up this ‘67 and will be puttering over the winter.

It was in Texas around 1982, went to Colorado at some point and wears a 1999 license plate. It came with a spare rear glass wrapped in Colorado newspaper from 2009, then I first laid eyes on it in Vermont in 2015.

250 / 3 on the tree, replaced with an SM465 & high hump. Tags on the Dana44 indicate 3.54’s with limited slip ✅

——

I jacked it out of the grass, pulled all 4 wheels, shoved in tubes and aired it up enough to drag across the lot and onto the car hauler.

It ran on starting fluid after buying an HEI, but wouldn’t pump gas and what I did cram in, poured out of the carb like a watering can.

Very solid bones, especially for sitting in the grass for a decade. A couple cab mounts are tender but all there, the rockers and cab corners are structural but have some small holes starting. Floors are mint, as are the firewall, cowl vent leaf collection area, drip rail, etc etc.

A local locksmith cut me a few keys with the code from the door cylinder, which luckily matched the ignition.

First photo is when i saw it in 2016. From there, photos are current day.

**WorldsCrappiestTruck** · Yesterday, 10:14 PM

More

**1970cstblazer** · Today, 04:30 PM

My '72 also had the Texas sunburn when I bought it in 2007

Shifty One · Today, 05:56 PM

Watching this one!

**dagnabbitt** · Today, 06:04 PM

What a beauty, congratulations!

68Gold/white · Today, 06:21 PM

WCT,
I like it!!!
Are you going to maybe do the CLR treatment on the rust? That rust looks serious...

Looking forward to what you do!!!

Yesterday, 10:08 PM	#1
WorldsCrappiestTruck Junior Member Join Date: Mar 2022 Location: Hinesburg Vermont Posts: 96	1967 GMC - SWB, great patina After nearly a decade of watching this C10 sink lower and lower into the dirt, I recently picked up this ‘67 and will be puttering over the winter. It was in Texas around 1982, went to Colorado at some point and wears a 1999 license plate. It came with a spare rear glass wrapped in Colorado newspaper from 2009, then I first laid eyes on it in Vermont in 2015. 250 / 3 on the tree, replaced with an SM465 & high hump. Tags on the Dana44 indicate 3.54’s with limited slip ✅ —— I jacked it out of the grass, pulled all 4 wheels, shoved in tubes and aired it up enough to drag across the lot and onto the car hauler. It ran on starting fluid after buying an HEI, but wouldn’t pump gas and what I did cram in, poured out of the carb like a watering can. Very solid bones, especially for sitting in the grass for a decade. A couple cab mounts are tender but all there, the rockers and cab corners are structural but have some small holes starting. Floors are mint, as are the firewall, cowl vent leaf collection area, drip rail, etc etc. A local locksmith cut me a few keys with the code from the door cylinder, which luckily matched the ignition. First photo is when i saw it in 2016. From there, photos are current day. Attached Images Last edited by WorldsCrappiestTruck; Yesterday at 10:16 PM.

Yesterday, 10:14 PM	#2
WorldsCrappiestTruck Junior Member Join Date: Mar 2022 Location: Hinesburg Vermont Posts: 96	Re: 1967 GMC - SWB, great patina More Attached Images

Today, 04:30 PM	#3
1970cstblazer All stock and staying that way Join Date: Jul 2003 Location: Elkland, PA Posts: 1,731	Re: 1967 GMC - SWB, great patina My '72 also had the Texas sunburn when I bought it in 2007 __________________ 1970 K/5 Blazer CST 4WD, Medium Bronze, 93k ACT. miles, 350, 4 speed, rear positraction, 16.5" x 8.25" HD wheel option, tilt, tach, vacuum, AM/FM, manual throttle...Dad ordered and purchased new 4/70. Currently frame off restoration finally getting close to completion.. 1972 Cheyenne Super 20 2WD, DK Blue/White, 90K ACT. miles, 402, TH400, 4.10 open, tilt, tach, vacuum, A/C, AM/FM, manual throttle.. A mostly original paint never rusted Texas survivor... 2017 Sierra 1500 SLT 4WD, Black, 45k miles, 5.3, 6L80E, 3.42 LS, 20" polished wheels, everything but moonroof and 6.2... 2019 Canyon SLT 4WD, White, 62k miles, 3.6, 8L45, 3.23 LS, 18" wheels

Today, 05:56 PM	#4
Shifty One Registered User Join Date: Dec 2014 Location: Tucson, AZ Posts: 733	Re: 1967 GMC - SWB, great patina Watching this one! __________________ 1987 V20 farm-hand rescue 1998 C2500 lot-rot rescue

Today, 06:04 PM	#5
dagnabbitt Senior Member Join Date: Dec 2014 Location: Edmonton Alberta Posts: 1,411	Re: 1967 GMC - SWB, great patina What a beauty, congratulations! __________________ DAVE Edmonton, Alberta 1959 Apache 1967 K20 1968 C20 1970 C10 1972 GMC 2500 1981 C10

Today, 06:21 PM	#6
68Gold/white Registered User Join Date: Sep 2011 Location: Ark City, Kansas Posts: 3,396	Re: 1967 GMC - SWB, great patina WCT, I like it!!! Are you going to maybe do the CLR treatment on the rust? That rust looks serious... Looking forward to what you do!!!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.