i just did mine. there is a bracket with 2 bolts under the dash holding the column in place. there is another bracket that bolts to the floor of the truck where the column goes through. there is a small bracket that compresses on the firewall side. the last one is 2 bolts that hold it to the steering box. my truck is a standard, so i didn't have to worry about the shifter linkage. a socket and a wrench is all u need, and maybe a little wd-40.
__________________
"All Corvettes are red. The rest are mistakes." - John Heinricy
Last edited by old_truck1969; 06-22-2002 at 01:51 PM.
|