Parts Giveway, Free Delivery, Greenville, OH - The 1947 - Present Chevrolet & GMC Truck Message Board Network

STBR · 10-22-2004, 02:13 PM

I have several parts left over from a 71 C20 I restored and have since sold. I have no plans to do another restoration and don't want to go thru the hassle of trying to sell these parts, but most of all I don't want to just throw them away. It's mostly small parts, winowglass and odds and ends that remain after an 5 year restoration. If you are within a reasonable distance of Greenville, Ohio I will load them up and deliver them to you, no charge. I'm about 35 mile northwest of Dayton, Oh. What's left after this weekend goes to the dump.

luckydog · 10-22-2004, 02:34 PM

any fenders?

Longhorn Man · 10-22-2004, 03:16 PM

What kind of stuff do you have left over?

724wdcopper · 10-22-2004, 04:17 PM

why are you guys that are giving away stuff always across the country?

Longhorn Man · 10-22-2004, 04:20 PM

Becouse we figure you guys have too much nice stuff over on the left coast, so we all buddy up over here.

724wdcopper · 10-22-2004, 04:28 PM

well, let me tell you, in this part of the country, you dont find rust free examples. this isnt arizona! even though we're 400 miles from the ocean, we still get the rust going. when you get 5 feet of snow, they dont just use the nice, friendly chemicals on the roads!

my drivers floor is gone, and the pinch weld the door seal and sill sit on is a distant memory. had to glue the gasket down with weatherstrip adhesive! gues that's what they make it for!

OhioDan · 10-22-2004, 04:48 PM

Quote:

Originally Posted by Longhorn Man

Becouse we figure you guys have too much nice stuff over on the left coast, so we all buddy up over here.

ROFLMAO! Quit Andy, you're killin me.

silvertonguedevil · 10-22-2004, 06:26 PM

Quote:

Originally Posted by Longhorn Man

What kind of stuff do you have left over?

Yeah, what he said

STBR · 10-22-2004, 06:42 PM

I know I have door glass and the frames (with wings) for the wings that go in the doors. If it rains tomorrow morning I will try to get a quick inventory. All I know is there is a bunch of truck stuff in my way in a too small garage.

silvertonguedevil · 10-22-2004, 06:51 PM

Keep us posted when you have some-what of an inventory.

Brainchild · 10-22-2004, 06:55 PM

Lets see here gas $1.89 per gallon x ..........

How far is it to Greenville from Monett?:p

*rage'nrat638* · 10-22-2004, 07:48 PM

heck it's 2.09 cent's for reg here.....

*dtlilly* · 10-22-2004, 08:42 PM

Quote:

Originally Posted by rage'nrat638

heck it's 2.09 cent's for reg here.....

Ya! I was going to say I'd love to pay $1.89 a gallon, I came down to Milwaukee for the weekend and it's $2.14 for regular unleaded

**Smitty** · 10-22-2004, 08:57 PM

Just paid $2.37 for cheap s**t!!!!

Longhorn Man · 10-22-2004, 09:16 PM

$1.90 here.

big blue 72 · 10-23-2004, 11:06 AM

i can meet you half way there from Hamilton, or if not I could come up there Sunday, about an hour and a half drive and pick up all your cast offs.
I wouldnt want anything for our truck to be thrown away!
Pm me or gimme a ring !
513-867-8122

OhioDan · 10-24-2004, 03:12 AM

STBR, did you get my PM? Call me. Like I said, I just live about 15-20 min. away from you. Thanx, Dan.

STBR · 10-24-2004, 10:59 AM

The parts have found a home. Thanks for you interest.

10-22-2004, 02:13 PM	#1
STBR Registered User Join Date: Aug 2003 Location: Greenville, Oh Posts: 30	Parts Giveway, Free Delivery, Greenville, OH I have several parts left over from a 71 C20 I restored and have since sold. I have no plans to do another restoration and don't want to go thru the hassle of trying to sell these parts, but most of all I don't want to just throw them away. It's mostly small parts, winowglass and odds and ends that remain after an 5 year restoration. If you are within a reasonable distance of Greenville, Ohio I will load them up and deliver them to you, no charge. I'm about 35 mile northwest of Dayton, Oh. What's left after this weekend goes to the dump.

10-22-2004, 02:34 PM	#2
luckydog < Fav Place on Earth! Join Date: Sep 2004 Location: South West Michigan Posts: 307	any fenders? __________________ Horsepower is how FAST you hit the wall, torque is how HARD

10-22-2004, 06:51 PM	#10
silvertonguedevil Senior Member Join Date: May 2004 Location: Seaside, Oregon Posts: 1,789	Keep us posted when you have some-what of an inventory. __________________ -Greg My Chevy trucks, past and present: 1962 C10 SB Fleetside 1964 C10 LB Fleetside BBW 1966 C10 SB Fleetside 1966 C10 SB Fleetside BBW 1968 C10 SB Fleetside 1971 C10 LB Fleetside 1971 C10 SB Fleetside 1972 C10 SB Fleetside Cheyenne 1972 C10 SB Fleetside Cheyenne Super 1972 C10 LB Fleetside Cheyenne Super 1974 C20 Cheyenne 1979 K5 Blazer Cheyenne 1982 K10 SB Fleetside Custom Deluxe 1982 K10 SB Fleetside Scottsdale 1986 C10 SB Fleetside Silverado 2008 Silverado 1500 4x4

10-22-2004, 06:55 PM	#11
Brainchild Still drivin' a Rat Rod Join Date: Sep 2004 Location: Monett Missouri Posts: 4,925	Lets see here gas $1.89 per gallon x .......... How far is it to Greenville from Monett?:p __________________ Rusty Member #13872 Instead of saying.....you are a discomfort in the back of my front.....one should be able to say...... you are a pain in the a$# 71 GMC LWB 49 Chevy 85 Chevy G20 Check out my website

10-22-2004, 08:57 PM	#14
Smitty Senior Member Join Date: Dec 1999 Location: Spring Valley, Ca. Posts: 1,133	Just paid $2.37 for cheap s**t!!!! __________________ Smitty '71 Short Fleetside Spring Valley, Ca.

10-22-2004, 03:16 PM	#3
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	What kind of stuff do you have left over?

10-22-2004, 04:17 PM	#4
724wdcopper graphic designer Join Date: May 2004 Location: Spokane, Washington Posts: 841	why are you guys that are giving away stuff always across the country?

10-22-2004, 04:20 PM	#5
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Becouse we figure you guys have too much nice stuff over on the left coast, so we all buddy up over here.

10-22-2004, 04:28 PM	#6
724wdcopper graphic designer Join Date: May 2004 Location: Spokane, Washington Posts: 841	well, let me tell you, in this part of the country, you dont find rust free examples. this isnt arizona! even though we're 400 miles from the ocean, we still get the rust going. when you get 5 feet of snow, they dont just use the nice, friendly chemicals on the roads! my drivers floor is gone, and the pinch weld the door seal and sill sit on is a distant memory. had to glue the gasket down with weatherstrip adhesive! gues that's what they make it for!

10-22-2004, 06:42 PM	#9
STBR Registered User Join Date: Aug 2003 Location: Greenville, Oh Posts: 30	I know I have door glass and the frames (with wings) for the wings that go in the doors. If it rains tomorrow morning I will try to get a quick inventory. All I know is there is a bunch of truck stuff in my way in a too small garage.

10-22-2004, 07:48 PM	#12
rage'nrat638 Account Suspended Join Date: Mar 2003 Location: THE FALL GUY CHICAGO IL Posts: 5,883	heck it's 2.09 cent's for reg here.....

10-22-2004, 09:16 PM	#15
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	$1.90 here.

10-23-2004, 11:06 AM	#16
big blue 72 Senior Member Join Date: May 2002 Location: hamilton,ohio,usa Posts: 1,499	i can meet you half way there from Hamilton, or if not I could come up there Sunday, about an hour and a half drive and pick up all your cast offs. I wouldnt want anything for our truck to be thrown away! Pm me or gimme a ring ! 513-867-8122

10-24-2004, 03:12 AM	#17
OhioDan Registered User Join Date: Apr 2002 Location: New Carlisle, Ohio,USA Posts: 1,404	STBR, did you get my PM? Call me. Like I said, I just live about 15-20 min. away from you. Thanx, Dan. __________________ LIFE AIN'T EASY WHEN YER FAT AND GREASY! GMC= Got More Class! 1970 GMC LWB, Fleetside, 350/4spd, Flowmaster "40's", 2002 GMC 16" Rallies, cowl hood,and added a bunch of options that weren't there when I started.

10-24-2004, 10:59 AM	#18
STBR Registered User Join Date: Aug 2003 Location: Greenville, Oh Posts: 30	The parts have found a home. Thanks for you interest.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.