My 89 CC Dually: Double Wide

[Hankster]

Sweet! Loving them caps!

[N2TRUX]

Scoti, what LEDs did you use in your cluster? I have looked at several options, and I'm not confident that the ones I am looking at wont have a blue cast to them.

[SCOTI]

I've got a business card for them. I'll forward the info when I get home. Loggin some miles on the dually tonight.

[Low Elco]

Looks good on the street!

[SCOTI]

Originally Posted by Low Elco

Looks good on the street!

Thank you sir.

Been driving it around town tonight. I have a systolic vibration that needs to be eliminated. I'm going to rotate the u-joints 90° & see if it helps. If not..... a double Cardan joint appears to be in my future. Also going to do more research on OD choices. 2200rpm @ ~50mph is not looking good for highway drives.....

[BLE 'BURBAN]

Originally Posted by SCOTI

Thank you sir.

Been driving it around town tonight. I have a systolic vibration that needs to be eliminated. I'm going to rotate the u-joints 90° & see if it helps. If not..... a double Cardan joint appears to be in my future. Also going to do more research on OD choices. 2200rpm @ ~50mph is not looking good for highway drives.....

What's your gear ratio?
My 87 had 4:10's in it and 215/85R16 tires.
I had the rear end gears swapped out to 3:54's from DANA/SPICER & also installed a GEARVENDORS O/D unit in it. Final drive in O.D. is now equal to 2:77 rear end gears.
mileage almost doubled on the highway.
And I still have plenty of towing ability.

[SCOTI]

Originally Posted by BLE 'BURBAN

What's your gear ratio?
My 87 had 4:10's in it and 215/85R16 tires.
I had the rear end gears swapped out to 3:54's from DANA/SPICER & also installed a GEARVENDORS O/D unit in it. Final drive in O.D. is now equal to 2:77 rear end gears.
mileage almost doubled on the highway.
And I still have plenty of towing ability.

235/85-16's (31.7)
TH400
4.10's

[SCOTI]

Well.... I put over 500miles on the clock in the last several weeks. The dually STILL has not had a bath (been over 4yrs now). It's been doing ok but still is not 'done'. I don't like driving it on the highway between the rpms & driveshaft vibration @ speed. Hopefully I'll get it up to my buddys work soon to pop the carrier x-member out for tweaks.

Unfortunately, the reason the miles have accumulated is because I no longer can drive my 90. Still have not spoken to the ins adjuster that is handling my claim so it's been frustrating (this happened the Friday BEFORE Thanksgiving).

[aggie91]

That looks like it took a hard hit...Glad you are OK.

[SCOTI]

'Holiday' pic from this weekends duty.
Picked up a Christmas tree for my x-wife....

[MTCK]

Crew looks great. That sucks about your half ton. Glad you are ok. What's your plan to drop rpm's? OD or regear?

[SCOTI]

Originally Posted by MTCK

Crew looks great. That sucks about your half ton. Glad you are ok. What's your plan to drop rpm's? OD or regear?

OD.
Gearing is fine around town (avg 2k rpms) & works good w/my tire height. I'm going to give Phoenix Transmissions a call & see what they have that might suit my needs.

[MTCK]

I love the ratio spacing on the 4L80 vs the big 2-3 jump with the 700r4's I've had. Works much better when towing a heavy load. They are proud of them, though.

[lolife99]

Hate to see your '90 tore up like that.
Hope the insurance company takes care of you.

[ruffrida2005]

I know it's not for your applications, but would a gearvendors be good for a bodied dually? My truck looks just like yours Scoti, same color. I'm on the fence between a 4l80 and gearvendor.

[Advanced Design]

I bought a 4L80E for $700 for my cc dually and will use either Chevrolet Performance Parts control system or the one from TCI.

Here is a good thread on that swap using the TCI controller.http://67-72chevytrucks.com/vboard/s...d.php?t=537481

[Jonboy]

I've heard good things about the TCI controller too. Sucks about your DD, but glad you are OK.

[slimneverdies]

I went with the 4l80e and tci controller for my Dually but haven't driven it yet. I did drive a 91 suburban with a gearvendor and in my opinion has a lot left to be desired...

[64chevtruck]

Wow, I really like your truck, that is the cleanest pancake ive ever seen, Thanks for posting the info,

I went through the whole thread and must have missed if you raised your steering box and did tie rod notches or not>?

Im trying to figure out if I should pancake or Z,,,

Happy Hollidays

[SCOTI]

Originally Posted by 64chevtruck

Wow, I really like your truck, that is the cleanest pancake ive ever seen, Thanks for posting the info,

I went through the whole thread and must have missed if you raised your steering box and did tie rod notches or not>?

Im trying to figure out if I should pancake or Z,,,

Happy Hollidays

Stock steering w/the driver side a-arm notched for clearance.

[SCOTI]

Guess I'll update while here.

The 90 is still idle. Turns out what I felt was correct.... the guy didn't have insurance. Seems based on the dates of the expired paperwork I did see was they insure the car for the brief period required for registration purposes & then drive around w/o it the remainder of the year (active end of March to beginning of July 2014; active end of March to begining of July '15). I see a pattern there.

So my buddy @ the collision shop has a connection & is looking to see if we can get some sheetmetal for as cheap as possible. Going to need a bumper, brackets, valance, air deflector, fender, hood, grille, inner fender, fan shroud, batt tray, headlight, & several of the wiring connections. Looks like the condensor & its tubes might be salvagable.

The dually has left me on the side of the road twice now (conveniently in the rain each time). Lost the water pump pulley studs on Thanksgiving Day (too short so they came loose despite use of Lock-Tite) & now the pulley on the alt. The alt was a 1-wire unit I got from Summit. I had it rebuilt by a local place so it was like OE allowing easy replacement in the event of failure. I guess they tightened the pulley too much & compromised the threads (they're stripped). I got an Oreillys/rebuilt unit in there but now have a serious mystery squeal (doesn't appear to be from the new alt).

This alt failure happened after leaving the shop Sat afternoon where I started the carrier bearing mod process. I'm going to cut out the center of the x-member, fab a new/removeable center plate, & flip the support bearing 180°. This should be much closer to optimum & allow me to shim it up in my attempt to minimize the vibrations. The rubber support bearing has definitely exceeded its service life as well as the u-joints.

So.... gotta determine the accessory squeal (going to pop on a fresh serp belt & idler pulley today & then start making a new center section for the carrier bearing. Then I'll get the d-shafts rebuilt & balanced.

I really need my 90. It sucks to not be able to have the dually down for an extended period to properly sort through these things. I do not like being in fear every time I drive it.

[64chevtruck]

Thank you Scoti. I'm pancaking mine and doing the cm mod that 75 dually did to the cm spring pockets. It's out and i cant find a reason not to.

[SCOTI]

Originally Posted by 64chevtruck

Thank you Scoti. I'm pancaking mine and doing the cm mod that 75 dually did to the cm spring pockets. It's out and i cant find a reason not to.

I don't see the need to cut up the x-members spring pockets unless you're trying to lay the body out (cutting the lower portion of the frame off).

[aggie91]

Scoti - Sent you a text message yesterday evening. Not sure if you got it. I have a right side headlight assy for an '88 up truck. Its yours if you want it for the cost of getting it to you.

[SCOTI]

Originally Posted by aggie91

Scoti - Sent you a text message yesterday evening. Not sure if you got it. I have a right side headlight assy for an '88 up truck. Its yours if you want it for the cost of getting it to you.

Yes sir, I got your text. Mine was converted to the single headlight set-up previously. Not sure what it will get/need now until I nail down the parts source (make/year model).

I was @ work late last night searching c-list for a donor & was going to get back to you today. Thanks for the offer!