Do you need '64-'66 Chevy Truck Parts?

[truckin66]

I need a grill support panel?

[LILRED66]

Originally Posted by truckin66

I need a grill support panel?

truckin66:

Thanks for the inquiry. I am fresh out of factory grille supports in good condition. You might give eBay a try...I see them on there quite frequently for a decent price. Sorry I couldn't help, but please keep me in mind for other 4-5-6 Chevy truck parts in the future.

[Throwback]

I e-mailed you awhile back but I am in need of a Whole Front clip for my c-10. (Fenders, Hood, Core Support, Grill, Lights, Everything really) Also asked about a Long Bed Fleet Side bed. If you have, Please let me know price and Shipping to 70706. If its cheaper for me to drive up there and get it, i will. Please let me know asap.

[MacAttack]

Do you have any extra throttle linkage pieces for sale? Looking specifically for that six inch long piece that bolts to the top/left (looking forward) of the automatic transmission case, pivoting the pedal movement up and over the intake manifold. This is a stamped sheet metal piece with two holes running through it with a rod attached.

[ol Curt]

Tony,

Looking for a couple of long fleet bedsides. Shipping would be to Evansville, IN 47722

Thanks

[LILRED66]

Originally Posted by MacAttack

Do you have any extra throttle linkage pieces for sale? Looking specifically for that six inch long piece that bolts to the top/left (looking forward) of the automatic transmission case, pivoting the pedal movement up and over the intake manifold. This is a stamped sheet metal piece with two holes running through it with a rod attached.

MacAttack:

Sorry for the delay in responding. I think I know what you are after and I am out of them. Sorry I couldn't help, but please let me know if I can help you with other 4-5-6 Chevy truck parts in the future.

[LILRED66]

Originally Posted by Throwback

I e-mailed you awhile back but I am in need of a Whole Front clip for my c-10. (Fenders, Hood, Core Support, Grill, Lights, Everything really) Also asked about a Long Bed Fleet Side bed. If you have, Please let me know price and Shipping to 70706. If its cheaper for me to drive up there and get it, i will. Please let me know asap.

Throwback:

Sorry for the delay. I don't have a complete front clip right now. I do have a few lwb fleetside beds in good, used condition. Please let me know if you are still interested and need a bed. Due to the shipping costs, this bed would have to be picked up at my shop in Kansas City, KS.

[GMC65Guy]

Are you responding anymore??? I still need 4 matching stock wheels for my '65 pickup... perferably red, or if you dont have 4 matching set then just 1, shipping to 74075

[LILRED66]

Originally Posted by GMC65Guy

Are you responding anymore??? I still need 4 matching stock wheels for my '65 pickup... perferably red, or if you dont have 4 matching set then just 1, shipping to 74075

GMC65Guy:

I finally replied to your previous inquiry. The matching set of factory six lug wheels is the faded green color. Let me know if I can help.

[GMC65Guy]

Originally Posted by LILRED66

GMC65Guy:

I finally replied to your previous inquiry. The matching set of factory six lug wheels is the faded green color. Let me know if I can help.

I dont think I'll be needing some wheels now. But how much for this color door panels, I dont have arm rests, does that mean the PO used to passenger side panels? IF so is it possible to get two passenge sides in that color?

http://farm3.static.flickr.com/2319/...8c45a0.jpg?v=0

Also how much for a a good condition GMC front grill and also good condition chrome front bumper, for my '65

ALSO, I know its not econimical to ship a bed, but im just curious how much you would charged for a good SWB fleet side like this one

http://farm3.static.flickr.com/2303/...f264df.jpg?v=0


and how about a drvrs side vent window for the 65

and complete power brake system and powersteering possibly

all shipped to 74075

thank you in advance!

[283 Man]

Tony, on motor mounts and transmission mount my Son went ahead and bought new ones.I know we will be need something later on and we will ask you first

[LILRED66]

Originally Posted by 283 Man

Tony, on motor mounts and transmission mount my Son went ahead and bought new ones.I know we will be need something later on and we will ask you first

Right on Morton. Let me know if I can help you with other 4-5-6 Chevy truck parts in the future.

[LILRED66]

Originally Posted by GMC65Guy

I dont think I'll be needing some wheels now. But how much for this color door panels, I dont have arm rests, does that mean the PO used to passenger side panels? IF so is it possible to get two passenge sides in that color?

http://farm3.static.flickr.com/2319/...8c45a0.jpg?v=0

Also how much for a a good condition GMC front grill and also good condition chrome front bumper, for my '65

ALSO, I know its not econimical to ship a bed, but im just curious how much you would charged for a good SWB fleet side like this one

http://farm3.static.flickr.com/2303/...f264df.jpg?v=0


and how about a drvrs side vent window for the 65

and complete power brake system and powersteering possibly

all shipped to 74075

thank you in advance!

These trucks came with no arm rests, driver side arm rest or both, so it is hard to say what was original or added. The door panels are either right or left and are not interchangeable, due to the location of the window and latch regulators.

I have right and left door panels, with or without holes for arm rests. Do you need both sides? Do you want them with or without holes for arm rests?

I don't have any GMC grilles at this time.

A good, used factory chrome bumper is $125.00, plus $65.00 packaging and shipping.

That swb fleetside bed sold for $650.00 and the fellow drove in from Houston, TX to pick it up at my shop in Kansas City, KS. I have another one in this condition for $650.00, picked up at my shop.

A good, used driver side vent window assembly is $100.00, plus $30.00 packaging & shipping.

A good, used factory power brake booster and mounting wedge is $200.00, plus $25.00 packaging & shipping.

I only sell the frame backing plates for mounting the power steering gear box. I don't sell a complete power steering conversion kit. Try: www.carsteering.com or www.classicperformanceparts.com for a complete conversion kit, including the frame backing plates and hardware.

Please let me know if I can help you with these or other 4-5-6 Chevy truck parts in the future and thanks for your inquiry.

[GMC65Guy]

Originally Posted by LILRED66

GMC65Guy:

I finally replied to your previous inquiry. The matching set of factory six lug wheels is the faded green color. Let me know if I can help.

How about one wheel that has the hubcap tabs?? 74075

[LILRED66]

Originally Posted by GMC65Guy

How about one wheel that has the hubcap tabs?? 74075

The only factory six lug steel wheels with hub cap clips are split-rims, so I may not be able to help you with this item, however please keep me in mind if you need other 4-5-6 Chevy truck parts in the future.

[GMC65Guy]

Originally Posted by LILRED66

The only factory six lug steel wheels with hub cap clips are split-rims, so I may not be able to help you with this item, however please keep me in mind if you need other 4-5-6 Chevy truck parts in the future.

This is what im looking for



I dont know if thats the split wheel or not.


Also I was wondering if you have a page for your 50's parts?? I've got a buddy who picked up a '50 chev.


Thanks again!

[joe231]

hey Tony, just curious....i don't see site supporter or anything on your profile showing you as a vendor, how are you allowed to post for sale items?

[LILRED66]

Originally Posted by joe231

hey Tony, just curious....i don't see site supporter or anything on your profile showing you as a vendor, how are you allowed to post for sale items?

I have been on for several years but I haven't renewed. These were all replies to a previous post. I plan to re-up as a sit supporter in the next few days. Thanks for the heads-up.

[joe231]

not trying to stir the pot, just curious, i see you fixed it

[jonzcustomshop]

tony, on the cigarette lighter, yes I am still looking for an all black one for a 65, also all black radio knobs if they exist... thanks jon

[LILRED66]

Originally Posted by jonzcustomshop

tony, on the cigarette lighter, yes I am still looking for an all black one for a 65, also all black radio knobs if they exist... thanks jon

Jon:

I have the black cigarette lighter and black radio knobs. I will send you a PM with payment information. Thanks and let me know your thoughts.

[Hoffman65burb]

Hey, was just wondering if you have any driver + passenger front fenders?

- thanks, rhys

[283 Man]

Ttt

[LILRED66]

Originally Posted by Hoffman65burb

Hey, was just wondering if you have any driver + passenger front fenders?

- thanks, rhys

rhys:

Thanks for your interest in my 4-5-6 Chevy truck parts. I have a good, used, driver-quality front fenders. If you are still interested, I can take a few photos for your consideration. Thanks for the inquiry.

[283 Man]

thanks Tony for reply on 2 speed powerglide getting harder to find those transmissions...I will be coming back to you for 64-66 parts in near furture.thanks Morton