![]() |
|
![]() |
#1 |
Registered User
Join Date: Jan 2010
Location: Katy Texas
Posts: 501
|
Re: 78 2wd Blazer - LS Swap and more..
got a couple questions on your vintage air swap. Ive rebuilt all of my factory ac stuff and while very cold the airflow still leaves a lot to be desired. I did vintage in my c10 and love it but I'm curious if the vintage in the blazer makes much of a difference in the back seat area. My kids complain that its hot and they can't feel the factory ac at all..
__________________
![]() |
![]() |
![]() |
![]() |
#2 | |
Registered User
Join Date: Oct 2014
Location: Scottsdale, AZ
Posts: 465
|
Re: 78 2wd Blazer - LS Swap and more..
Quote:
I'm not going to say the passengers in the back seat or going to "feel" direct air blowing on them from the front. This is why all new GM full size SUV's have a separate rear air kit. However, I will say that this unit moves about 2x to 3x more air than our factory kit did. That volume does allow the cab air to get turned over much quicker. To me it would still be cool to try and install a rear air kit in the blazer. To that accord we're going to be installing the extra optional upper door weather stripping in our truck to further help seal up the cab. The more you can seal this thing up the better the outcome will be. |
|
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Jan 2010
Location: Katy Texas
Posts: 501
|
Re: 78 2wd Blazer - LS Swap and more..
awesome, Thanks man.
__________________
![]() |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Oct 2014
Location: Scottsdale, AZ
Posts: 465
|
Re: 78 2wd Blazer - LS Swap and more..
TO EVERYONE THAT MAY READ MY THREADS. AS AN AVID USER OF PHOTOBUCKET.COM FOR OVER 15 YEARS ALL OF MY PICTURES AND HOT LINKS HAVE BEEN NUKED. I DON'T KNOW IF THEY WILL EVER GET BACK AS I'M NOT WILLING TO PAY $400.00 RANSOM TO DO SO.
Thank you for your time. Frustrated, Phillip |
![]() |
![]() |
![]() |
#5 | |
Registered User
Join Date: Aug 2012
Location: Northeast KS
Posts: 1,778
|
Re: 78 2wd Blazer - LS Swap and more..
Quote:
__________________
1999 GMC Suburban K2500 SLT, 454/4L80E 1991 Z/28, 6.0L/T56 1949 GMC 250, S10 Frame, 6.0L/4L80E Instagram @aceshighspeedshop |
|
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Oct 2014
Location: Scottsdale, AZ
Posts: 465
|
Re: 78 2wd Blazer - LS Swap and more..
Okay time for another update!
I've been running the Cooling Components CCI-1228 fans for a while now (which can be found HERE). And while they cool very very well, they are kinda loud for my taste, even on low. So, I decided to move to an OEM fan solution. I've used GM fans in the past and I'm always impressed with the amount of air they can move and for how quiet they are, even at full speed which is currently how I've got them wired. The fans I'm using came from a 2004-2007 Cadillac CTS-V. I've got one of these cars so it made taking pre-measurements much easier. The fans are 12" diameter fans with 160W motors on each. This lines up pretty well with the 28x18" radiator core I've got in the truck. My original plan was to use the factory shroud and everything. That's by far the easiest way to go. However, with the fan on the right being in the raised position this ran right into my air induction tube from the engine. I could shove the shroud down and all the way to the passenger side and make it fit, however this left a large gap at the top and along the driver's side. That would probably be okay in 98% of the country, but in Phoenix that's not good. That's precious area that I'm loosing when you're parked in 120*+ weather.. So, I decided just to build a shroud that would meet my needs and fit my core perfectly. I first used 5052 aluminum to bend up the general shroud. It's 1" deep and has flanges on the top and bottom that will be used to mount the unit to the radiator. The dimensions of the raised area came out to 16" x 28" and flange to flange the unit is 18" tall. Next I stripped the fans and motors out of the OE shroud and used some 6061 solid rod bent on each end to create a mounting structure. The center pieces are some .090 5052 I had laying around that I used a 4.5" hole saw to cut the hole for the electric motors to pass through. Another key feature when purchasing used OEM fans is to get them with the electrical plugs still in them. Many of the OEM's use Yazaki terminal plugs which are hard to find in the US as well as online. And, when you do, they want too much money for them. I copied the 1/2" stand off from the tip of the blades to the core that the original shroud gave. However, this left another 3/4" of blade sticking out of the shroud. While I don't think this would be an issue for performance it's certainly a safety issue. So next I made some 90* pieces that were 41" long and used my stretcher to turn them into guards. From there it was a whole bunch of welding and a whole bunch of drilling to finish it off. All of the holes are for SPAL wind flaps that relieve pressure from the non aero design of a flat shroud. At speed they open and allow more air to pass, and when you're stopped they close from their own weight as well as suction from the fans. I added a separator on the back side so I can run just one fan at a time and not get bypass air just looping around as well. Finally it's hard to get a good picture in there but here they are finished up and mounted in the truck. A friend had asked me how long I thought it would take me to build them. I laughed and said I think it will take me 2.5 hours so it will probably take me 5. In the end it took me 12 hours to build the shroud not including painting and wiring it which was easily another hour or two. In the end I've now got a fan setup that doesn't sound like a 747 coming in for a landing. However I'll have to wait till next summer to really put it through the tests! |
![]() |
![]() |
![]() |
#7 | |
Senior Member
![]() Join Date: Mar 2016
Location: Longview, TX
Posts: 758
|
Re: 78 2wd Blazer - LS Swap and more..
Quote:
Last edited by buffydores; 07-06-2017 at 02:42 PM. |
|
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Oct 2014
Location: Scottsdale, AZ
Posts: 465
|
Re: 78 2wd Blazer - LS Swap and more..
It will happen to everyone on Photobucket. They are just starting with the highest bandwith users first. For some users the cutoff started about 2 weeks ago. But it will happen to everyone over the next month from my research. Not sure what to do at the moment. What's funny is, had they just charged like 25-50 I bet most would pay. But asking for $400 is suicide.
|
![]() |
![]() |
![]() |
#9 | |
Senior Member
![]() Join Date: Mar 2016
Location: Longview, TX
Posts: 758
|
Re: 78 2wd Blazer - LS Swap and more..
Quote:
|
|
![]() |
![]() |
![]() |
#10 |
I know the pieces fit
Join Date: Nov 2007
Location: MONTGOMERY, AL
Posts: 5,523
|
Re: 78 2wd Blazer - LS Swap and more..
Beyond idiots. They've made people mad. Lot's of people talking about it and none of it good and I haven't read one post from someone who was going to pay.
|
![]() |
![]() |
![]() |
#11 |
Registered User
Join Date: Feb 2008
Location: Des Moines, Iowa
Posts: 1,237
|
Re: 78 2wd Blazer - LS Swap and more..
That's terrible about the pictures!!!!
Thanks for the response.
__________________
Instagram @HomeBuiltC10s Dads 79 GMC Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=642929 1978 Silverado Build http://67-72chevytrucks.com/vboard/s...d.php?t=756016 |
![]() |
![]() |
![]() |
#12 | |
Registered User
Join Date: Oct 2014
Location: Scottsdale, AZ
Posts: 465
|
Re: 78 2wd Blazer - LS Swap and more..
Quote:
I'm currently downloading all of my photos back to my external that I don't already have copies of. Only way to try and keep them safe. |
|
![]() |
![]() |
![]() |
#13 |
Registered User
Join Date: Oct 2014
Location: Scottsdale, AZ
Posts: 465
|
Re: 78 2wd Blazer - LS Swap and more..
Okay so after doing a ton of research on the upper door seals, I decided I wanted to add them. The wind noise in our Blazer really wasn't bad at all with all new strips and new vent window seals. However, it gets so hot here in the summer, and we plan to take this thing across the desert quite a bit, so we thought what the hell, let's give them a shot.
I was initially worried the door would be harder to close as we bought these from LMC and not from Soffseal. However, after getting them glued and screwed in they door closes the exact same as before! Seal butts up nice and firm against the upper body and looks like it should help out. I had called the guys at Precision and they were adamant about not adding these to a truck that didn't come with them because we'd have to drill holes in the doors. I was thinking, "man, you should see all the holes I've drilled and filled over the years.." Ha-ha. Here are some pics of the seals installed. Also yes, I plan to go back and fix all the other pictures in this thread, however at the moment I'm waiting for a friend to finish up a pic server. Once he does I'll get them updated. |
![]() |
![]() |
![]() |
#14 |
Registered User
Join Date: Oct 2014
Location: Scottsdale, AZ
Posts: 465
|
Re: 78 2wd Blazer - LS Swap and more..
Also got some rain/wind shields installed behind the door panels. I was getting a lot of air blowing in and around the panel so hoping this will slow/stop that.. It's so hot and A/C is a premium this time of year!
|
![]() |
![]() |
![]() |
#15 |
Senior Member
![]() Join Date: Mar 2016
Location: Longview, TX
Posts: 758
|
Re: 78 2wd Blazer - LS Swap and more..
Come on man. I need some eye-candy. What have you been working on?
![]() |
![]() |
![]() |
![]() |
#16 |
Registered User
Join Date: Oct 2014
Location: Scottsdale, AZ
Posts: 465
|
Re: 78 2wd Blazer - LS Swap and more..
I've been making some upgrades of course, but the new photo upload process is just too annoying for me to continue using. I need to figure out a better way. However look for a tailgate power window conversion and a radio swap to come!
|
![]() |
![]() |
![]() |
#17 |
Registered User
Join Date: Oct 2014
Location: Scottsdale, AZ
Posts: 465
|
Re: 78 2wd Blazer - LS Swap and more..
I got really tired of cranking my rear window up and down so I finally upgraded to a power setup. I will say it wasn't so much the cranking that bothered me, but the locking and unlocking of the crank handle. It's a two handed operation so if you've got your hands full that means you're setting your stuff on the roof. So, I purchased an original power regulator here on the board and had it converted to run on a late model power window motor over at Nu-Relics. It's not a 100% bolt in operation but with a few small modifications it's all in there. One thing is that the new motor requires a reversing switch unlike the original. So, in order for it to work and still use the key switch I had to wire in a pair of relays to do the polarity switching with the original 2 pole switch of the tailgate.
I also scored an NOS lock housing so I was pretty excited about that. Here is a video of the new setup running.. When Buffydores is here in October we can run a window drag race against the original setup. Hehe Blazer Tailgate Window Video |
![]() |
![]() |
![]() |
#18 |
I know the pieces fit
Join Date: Nov 2007
Location: MONTGOMERY, AL
Posts: 5,523
|
Re: 78 2wd Blazer - LS Swap and more..
Sweeeet... I bet you're one of those guys that could rig it to run off a late model GM remote fob and roll down the back window if you wave your foot under the bumper. Someone is going to, eventually.
|
![]() |
![]() |
![]() |
#19 |
Registered User
Join Date: Oct 2014
Location: Scottsdale, AZ
Posts: 465
|
Re: 78 2wd Blazer - LS Swap and more..
That's easier than it sounds actually. The key to all of that stuff is the BCM. If you get a vehicle that has that and the engine trans combo, just swap it ALL over. Lot's of wiring yes, but not physically difficult. Nu-Relics told me to throw some more grease on the gears and that should smooth out the operation some more. So I'll do that in the coming week or so. They always recommend wheel bearing grease over white lithium.
|
![]() |
![]() |
![]() |
#20 |
Senior Member
![]() Join Date: Mar 2016
Location: Longview, TX
Posts: 758
|
Re: 78 2wd Blazer - LS Swap and more..
|
![]() |
![]() |
![]() |
#21 |
I'm just glad to be here!
Join Date: Jan 2008
Location: Longview, TX
Posts: 4,788
|
Re: 78 2wd Blazer - LS Swap and more..
Nice work!
__________________
Karl ![]() 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square |
![]() |
![]() |
![]() |
#22 |
Senior Member
![]() Join Date: Mar 2016
Location: Longview, TX
Posts: 758
|
Re: 78 2wd Blazer - LS Swap and more..
Your craftsmanship is epic.
|
![]() |
![]() |
![]() |
#23 |
Registered User
Join Date: Oct 2014
Location: Scottsdale, AZ
Posts: 465
|
Re: 78 2wd Blazer - LS Swap and more..
|
![]() |
![]() |
![]() |
#24 |
I know the pieces fit
Join Date: Nov 2007
Location: MONTGOMERY, AL
Posts: 5,523
|
Re: 78 2wd Blazer - LS Swap and more..
If you're not an electrical engineer, you should have been. Your knowledge of system needs and aftermarket vs OEM stuff is refreshing.
|
![]() |
![]() |
![]() |
#25 | |
Registered User
Join Date: Oct 2014
Location: Scottsdale, AZ
Posts: 465
|
Re: 78 2wd Blazer - LS Swap and more..
Quote:
For me, in school I never made the connection of how studies and real world applications meet until much later.. Never say never though right? |
|
![]() |
![]() |
![]() |
Bookmarks |
Tags |
1978, 6l90e, lowered, ly6 |
|
|