The 1960 - 1966 Member Introductions

[OldGMJon]

Originally Posted by ironman3452

just a thought, but I thought this was for owners of chevy trucks

Sorry to stray into a lost love with a fellow board member for a few bio lines buddy but isn't it all about our obsessions here now?

[CRGRS 66]

I think all is good oldgmjon, you noted that you recently bought a 66, post up a picture of it, then everyone will be happy

[61 apache 10]

Hello from Ontario. Great site guys, glad I joined. Lots of information here. Here are some pics of my truck.

[pwrbrkpadguy]

This is me with my 65. Purchased about three years ago site unseen from a retired Chevy dealer in Michigan. After many pictures and communication sent, I was convinced as he said that there was little to no rust. My brother and I met him half way at Elizabeth Town, KY and hooked the trailer to his truck and hauled it home. It has been a labor of love and alot of fun. One of the last things that I am working on is filling out the fender wells with 15x8 rallys. The gentlemens story about the truck is almost as good as the little old lady that drove it to church only on Sundays. The previous owner stated that it had only been driven 1200 miles in the last 32 years. I was skeptical until I saw the truck and the entire under carriage was covered with spider webs. Hard to believe a truck could be in this good of condition from a state with heavy salt usage. Check out my reproduced power brake pedal pad installed in the picture of truck. Thanks for all the valuable help in this truck build.

[CRGRS 66]

welcome aboard fellow ontarian, where are from in ontario?
your 61 looks

[CRGRS 66]

pwrbrkpadguy, that is one beautiful truck as well!!!! welcome!

[pwrbrkpadguy]

Thanks Craigerrr, lots of work, money and a whole lot of fun!

[Palf70Step]

Well been on the board a good many years now, about 13, but newish to the 60-66 area. The 64 I got from another board & local truck club member. It's one as a club we helped do a few things on. I really like the looks of the 60-66 SWB Fleet lowered, but only model truck I do.

I am still piddling with it and some day will repaint it, but for now I want to drive it as much as possible. It's a 350, with a 3peed manual on floor and ECE 4.5/6 dropped suspension kit.

[1Bad62Pro/Street]

Welcome guys! Nice trucks!

[GINGER64]

My name is Duane and here is Ginger my 64 C10. Been on this forum since September last year when I picked this truck up from the Long Beach Rod Run here in Washington. Drove her around for about a month then put her on jack stands and started updating all the suspension. The previous owner just cut and or heated the springs. So she is getting a all new static drop Porterbuilt suspension and Wilwood disk brakes on all four corners. Power steering upgrade and new frame mounted tank.

Love this forum! What a great bunch of people. I have been on many forums for previous vehicles I have owned and none nicer that this.

[CRGRS 66]

Welcome aboard!

[Hollow65]

New guy from San Diego. My name is James and I have a 65 lwb. ECE 4/6 drop. Engine is a 383/BDS 8-71 @ 12#, TCI TH400, 12 bolt 4.10 rear. It's not tubbed. 17x8 up front, 18x8 rears. They're weld racing wheels, I don't remember the name. Been abusing this truck for 16 years. I don't have a photo account or anything, sorry guys.

[chevy_mike]

Originally Posted by Hollow65

New guy from San Diego. My name is James and I have a 65 lwb. ECE 4/6 drop. Engine is a 383/BDS 8-71 @ 12#, TCI TH400, 12 bolt 4.10 rear. It's not tubbed. 17x8 up front, 18x8 rears. They're weld racing wheels, I don't remember the name. Been abusing this truck for 16 years. I don't have a photo account or anything, sorry guys.

Welcome to the site. I think you are the guy who emailed me at my personal site (hotrodhaulers.net). Sent you an email this morning. Lots of good info in this site and some really cool trucks!

[Ghernandez66]

1st post on the site but been a member for a few months now .
My name is Gibran. AKA. "G" since alot of ppl can't pronounce my name.. I own a 66 C10, SBW, SWB fleetside' haven't done alot to the truck since I got it I been working out of town for the last 3 months and my weekends are for my family.
But I have accomplished to get the truck running like it's supposed to I did alot of engine work my self with the help of a local machine shop owner who's been really cool about helping with the issues that I have runner into. (Replaced head gaskets 3 times lol rockie mistakes....) also reading alot of good info in this site.
I really don't like the color and since I know it needs bodywork I never payed mind to it cause it needs to be repainted anyway.. here are some pics.

[pwrbrkpadguy]

Welcome G, I like your truck and it looks like you got your priorities right. Weekends are for the family. Mike.

[mattbert56]

G. Hope to see ya around in town sometime. My trucks in the middle of a swap. But it'll be Rollin again soon. My buddy and I sometimes take our pickups to buns n burgers for there summer Friday night shows. Feel free to stop on by. Always nice to meet new people. Nice truck tho man

[Ghernandez66]

Mattbert56.

Thanks man I will definitely try I have some suspension stuff to take care of before I can safely drive it on the street often and I hope I can get it done soon..

[mattbert56]

G
True. I know how that is.shoot me a Pm, if you ever need any help I'm sure I'm just around the corner.

[Mcelroy247]

Hello I have followed the forum for sometime now. This is my 4th 1966 Chevy truck and actually my second time owning this truck. The first two I had where built into one good one as a father son project with me and my dad my Sr year. Like a fool it was sold. A few years later I bought another with hopes for he and I to do it again wasn't able to so it was sold. I bought the one I currently have now the first time for me and my sons to build. Lack of money and a shop along with needing money to see my oldest graduate Marine boot camp forced me to sell it. I lost my father unexpectedly in January. The week after his funeral the guy that I sold it to with his promise to offer back to me if ever sold called me up and she is home again. Here are a few pics of my father son project with my dad and a pic of the project I plan to build with my boys.

[Mcelroy247]

Another of current

[Mcelroy247]

Me and dad at it

[Mcelroy247]

Just in time for prom

[jmatsson]

Hello. My name is Justina. MY boyfriend and I are working on a 1961 Chevrolet Apache 20. Longbox, side step.
We are the 4th owners - originally on an avocado farm in California. Luckily for us, all the previous owner kept all the paperwork and pictures of things that were done. When we bought it, it even came with a bunch of things that the previous owner bought for it, but never got around to doing. Also, fortunately for us, it ran.
Now that our garage is finished, we are making changes to the truck. We are putting a lowering kit in, disc brakes, power steering. It's likely we will be changing it to automatic as well.
I am sure I will be on here frequently, asking a million and one questions.
First issue we are having is where to mount the power steering pump. Any suggestions?

[1Bad62Pro/Street]

Welcome all from North Carolina!!

[aerotruk63]

Originally Posted by jmatsson

Hello.
I am sure I will be on here frequently, asking a million and one questions.
First issue we are having is where to mount the power steering pump. Any suggestions?

Welcome to the site. We would need to know which engine is in the truck. You might have more success posting your question in a new thread.

Also could you please post some close up pictures of your spotlights inside the cab as well if theirs a handle inside.