Boppa's old yeller truck

[jlsanborn]

Glad to hear your moving along and hope your taking a bunch more pictures to throw on here.

You should check on our pal FrankieD and give your two-cents on aligning his front clip. No doubt you've got some tips!

http://67-72chevytrucks.com/vboard/s...=487750&page=6

Still waiting for the smoke show, Boppa or The Kid! Maybe a contest?

[FrankieD]

jlsanborn said I should check out your thread to get some ideas so I will be checking it out.

[Low Elco]

Sorry its been a minute since a proper update. Been busy, but you almost can't tell. We've slammed into the tedious part of the build, but we're seeing daylight. Got all the wiring in for the headlight upgrade kit, all the corner lights are in, whole truck got powerwashed, seat mounts are drilled, power seat is mounted, we have a better solution for the windshield washer, wiring runs are secure, some of the grounds are run, and the cowl area is built and awaiting assembly. Had back to school and neighbor kid stuff tonight, but Boppa went yardin' today and got some good scores. He also got stung by wasps twice on the same elbow, which he wasn't amused by. I offered to pee on his elbow to help the pain, he wasn't amused by that either. Neighbor Jay is back from Florida Vacation all stoked to see progress, so maybe we'll get ta crackin later in the week and it'll look like we're doing some thing... Maybe. JL, thanks for the big props here and in other places, but I'm just a frimp in his garage, that wants it to be right for his dad. Believe me, there's been anxiety and frustration on this deal. Thanks though, it's inspiring. (Oprah moment!) ANNNNNNYway, here's the pics-

The Kid looking at the seats, hoping the mounting solution goes well.


Uncle Matt checking out the surprise. He came out on Sunday and was a huge help, as usual.


Uncle Matt and I's trick mount for the four relays, two circuit breakers and distribution block we're gonna need. Amazing Fab skillz. (We twisted a piece of 1/8 x 3 flat bar aluminum using a crack in the sidewalk and a big azz pipe wrench, then cut it to fit between the upper and lower rails of the core support and bolted it in with screws from a shed I built 15 years ago. Super trick guys, we are.)


Boppa digs the surprise- I finally fixed, painted, polished, and installed the damn gas door!


My third brake light works! so does the bed light, through the factory switch.


Anyway, three weeks to go, we'll just keep pluggin'! Thanks for playin' along!

[Low Elco]

Oh, the Kid sez he'll smoke Boppa. (Yes, he can drive @12. This shocks some people. I don't know why.) You gotta lay off that kinda talk, though, these back tires are going on the 10's I got for LBT!

[jlsanborn]

WHATEVER! You've got some skills man and should pat yourself on the back. The truck looks awesome, can't wait for the video and can't wait for the LBT build. I'm thinking Boppa, The Kid and a tape measure in front of the house. Too bad they don't have smellavision sorted out yet!

[Low Elco]

Smellavision, LOL! That would be awesome.

[FrankieD]

Originally Posted by Low Elco

Oh, the Kid sez he'll smoke Boppa. (Yes, he can drive @12. This shocks some people. I don't know why.)

Heck in Missouri 12 is Marring age aint it?

[Low Elco]

A small update- rad and Efans in, accessories back on, water system sealed up. Wiring laid out for Efans, radio is done and looks great, throttle spring holder is built and installed. I think that's it! Hopefully this weekend we make it look like a truck! Hopefully.
Posted via Mobile Device

[FrankieD]

Truck is lookin nice. What did the seats come out of ? I'm not sure what to put in mine right now I am usind a Mexican blanket I got from my son in law.

[Low Elco]

Seats from a crewcab 06 Silverado. Built in belts! Hopefully they'll be closer to their home this weekend. Picking up stainless vent assemblies tonight and gonna start the clean and paint on the door guts and wire up the fans and stereo. Thanks!
Posted via Mobile Device

[Low Elco]

Busy day, but one of the good ones! Hood is on, front metal is fit, grille is built and on, E-fans are wired in, loomed, harnessed and functional, cab grounds are in, Front stereo speaker pod is built and painted, cab side engine harness got a MAJOR clean up, tried to get the temp gauge to work, no bueno. Gah.. Then it got exciting. Went to adjust the headlights and had the motor idling to make sure the fans were working. Kept smelling gas in the dark. Hadn't been smelling gas before while working on it all day. Got a light and looked and gas was SPRAYING ALL OVER THE FRONT OF THE MOTOR! Boppa had installed a fuel regulator and inline filter when we had a Holley on it, and we kept it when we put an Edelbrock on. The hose into the regulator had split right below the clamp and was just a- sprayin'! Thank God the fans hadn't come on yet. Shut it off and cleaned up a bit of plumbing and got rid of the regulator. Oddly, it runs better now. Just seems a lot smoother. Who Knows. Anyway, More work tomorrow, Hopefully big progress on the door front.

[jlsanborn]

That would make a good book title! "Smelled gas in the dark - Uh oh!"

I don't care who you are!
Posted via Mobile Device

[Low Elco]

Lol, you must know The Kid and his fondness for hot eatin'!
Posted via Mobile Device

[jlsanborn]

That's MAD funny!
Posted via Mobile Device

[Low Elco]

Sunday update- Well, had kind of a good but not real productive day. Pulled the glass out of the old cab and realized we only had a few more things to pull. So we got them pulled and ran the old cab over to Neighbor Jay's dad's scrap pile. Yaay, clean side yard! Empty trailer! Now the list- glass is cleaned and prepped, seal is installed, glass guy is coming out this week, have to repaint slider frame. Front speakers are installed, antenna mount has been sorted, grille is in, bumper is on, (What a PITA! Frame horns are a mess! Thank god we bought 71 bumper brackets, they saved the day. If you ever have to hang one, get the right end brackets, bolt the center parts on hard to the bumper and loose to the frame, tighten up the end brackets so you're good and shim the center to get it right. Oy Vey.) Anyway, it looks like a truck now! Just have to get over the fear and build the doors, finish lining the bed, adjust the trans and do the interior. Here's some pics-

Boppa waves goodbye to the old cab!


Neighbor Jay in Mid-Chuck. Rolled it right off the trailer.


Boppa actually driving his truck!


Last thing today-


How it looks now. (Maaaan, I wanna slam this thing! Maybe this winter.)


Off for another week of thrills and spills! Thanks for playin' along.

[VA72C10]

looks good!

[bigguy69]

Looks awesome!
Posted via Mobile Device

[Low Elco]

Thanks guys! Hoping the end is near!
Posted via Mobile Device

[litew8]

It aint over til we see the burnout movie!

[Low Elco]

That'll be a bit- need to feel better about trans first. Got wheel wells rubber lined, painted slider, installed front end trim and CLEANED SHOP a little tonight. It was gettin' bad!
Posted via Mobile Device

[Low Elco]

Update- got inner fenders in, door screws in, new wheels on, old passenger door broken down, door tracks scrubbed and painted. Today is door day, I don't think it'll be as bad as I was thinking. I hope. Tomorrow is glass and appraisal day, and the radio is supposed to be here then. Interior this weekend, then I gotta fix the bedliner. I still wanna drop it some more. Well see.
Posted via Mobile Device

[Houch]

Tease!! Where's the pics with the new wheels on? Lol. Your right, Boppa needs his truck a little lower.
Posted via Mobile Device

[Low Elco]

I took a few, fell asleep before I got that done though. Probably be this weekend before I get anything up.
Posted via Mobile Device

[Low Elco]

It's late, but, except for one clip, the doors are done and they look and work nice! Thanks to Uncle Matt for helping tonight. This was one of the big things I was tweaking on, and bang bang, done! Glass 9 am tomorrow, stereo will be here tomorrow.
Posted via Mobile Device

[Low Elco]

Well, kind of a slow night tonight, We've been hitting it pretty hard. Drained the rad and replaced the water neck gasket again. Fixed the drain plug gasket while I was at it. Got glass in today, looks good. Got appraised today by a long time reputable guy, 1's across the board. Got a good number for the ins. co. Boppa got a referral from the app guy and got on the Chrome insurance. Seems like it'll be a good fit. Took it up and put gas in it tonight, runs like crap. I dunno. Seems like 7 cylinders, bad gas, and a vacuum leak all at the same time. The trans still isn't right, but it'll adjust, I think. The efans are coming on at 160 and staying on.? who knows. Anyway, here's some pics-

The Kid wanted to help, so he put on the bowtie and lenses.


Boppa cleaning and waxing the inners before install.


Yours truly installing the inners-


with the new wheels-


Lotsa yellow!