Project Platinum C10

[77ChevySharkBite]

Originally Posted by Claytona08

That is the frame underneath the drivers side door.

Ahhhh yeah I have to admit that doesn't look good. Which I know that's stating the obvious, what could have caused that?

[cyclefreak207]

Oh lordy! How did that happen?!

[SkinnyG]

It's normal.

Don't freak out.

Chevy put it there to clear the massive cat back in the day. There are threads on here specifically regarding that part of the frame. It is normal.

I know I freaked out when I first saw mine.

[Claytona08]

Originally Posted by SkinnyG

It's normal.

Don't freak out.

Chevy put it there to clear the massive cat back in the day. There are threads on here specifically regarding that part of the frame. It is normal.

I know I freaked out when I first saw mine.

Whewwww, and I can now wipe the sweat from my brow! I was nervous as can be when I seen this!

[cyclefreak207]

Originally Posted by SkinnyG

It's normal.

Don't freak out.

Chevy put it there to clear the massive cat back in the day. There are threads on here specifically regarding that part of the frame. It is normal.

I know I freaked out when I first saw mine.

I was halfway about to run to the parking lot and check mine! haha

[SeTx67]

Glad you got it fugured out and the frame is normal so you can breath again

You gonna be in the truck today?
Posted via Mobile Device

[Claytona08]

Originally Posted by SeTx67

Glad you got it fugured out and the frame is normal so you can breath again

You gonna be in the truck today?
Posted via Mobile Device

Not sure. I was going to take the truck to the paint shop yesterday evening to get a hard quote and see when they were going to start on it but our meeting got canceled. I have to call around lunch and see when he wants me to bring it up there.
Posted via Mobile Device

[Sodell]

The PO took out a leaf spring and it sat about 1" lower, and I would have had to replace the springs to do a flip kit. I just installed a set of 2" shackles. I think I still need a bit more so I am going to get a set of hangers, I think it needs another inch or two. What do you think?

[IMG][/IMG]

[77ChevySharkBite]

Originally Posted by Sodell

The PO took out a leaf spring and it sat about 1" lower, and I would have had to replace the springs to do a flip kit. I just installed a set of 2" shackles. I think I still need a bit more so I am going to get a set of hangers, I think it needs another inch or two. What do you think?

[IMG][/IMG]

I think another 1" would sit perfect unless you want a little front take then drop it 2.
Posted via Mobile Device

[Claytona08]

Originally Posted by Sodell

The PO took out a leaf spring and it sat about 1" lower, and I would have had to replace the springs to do a flip kit. I just installed a set of 2" shackles. I think I still need a bit more so I am going to get a set of hangers, I think it needs another inch or two. What do you think?

[IMG][/IMG]

Maybe 1". I like these trucks a little bit higher in the back because it makes them look fast to me for some reason. I like those black wheels and white lettering on your truck. Looks great!

[Claytona08]

I went and talked to the paint shop yesterday evening and I have to drop my truck off July 8th to get started. I'm super excited!! I have attached some pics of his work. I think I am going to strip the truck down (Trim, interior, grille, etc...) as it will save me 400$. The paint in the picture isn't wet sanded and buffed, just straight paint and clearcoat. I am going to get my truck wet sanded so it will remove any orange peel. Oh and please excuse my ugly mug! lol

[77ChevySharkBite]

That's going to look even better since it'll be wet sanded!

Hey that's how i dress for work too, actually could pass as a golf outfit.

[Claytona08]

Originally Posted by 77ChevySharkBite

Actually could pass as a golf outfit.

Haha, true. I had to un-tuck prior to going into the paint shop!

[77ChevySharkBite]

Originally Posted by Claytona08

Haha, true. I had to un-tuck prior to going into the paint shop!

I'm excited to see it off to paint and everything it's going to look sharp!

[Claytona08]

Originally Posted by 77ChevySharkBite

I'm excited to see it off to paint and everything it's going to look sharp!

Thanks man! I am excited. I have picked out a few colors I am thinking about using. Please provide some input guys. I have picked Gun Metallic for the top color and Alabaster Silver Metallic for the bottom.

[77ChevySharkBite]

Originally Posted by Claytona08

Thanks man! I am excited. I have picked out a few colors I am thinking about using. Please provide some input guys. I have picked Gun Metallic for the top color and Alabaster Silver Metallic for the bottom.

Is that Gun Metallic, the same as Gun Metal Grey? I think that combo would look sharp! Being your going to try and "re-make" the platinum edition look that bottom color might need to be a little dark, so maybe have the painter throw a little bit of black in it to darken it a tad? Actually i take that back, I just went and googled it those colors look spot on!

I love the grey that's on my Accord it kind of looks like that Gun Metal color it has a dark tint to it, but when the sun hits it, it has a a little bit of shine to it.

[SeTx67]

Cyber grey metallic is a awesome color


Posted via Mobile Device

[Claytona08]

Originally Posted by SeTx67

Cyber grey metallic is a awesome color


Posted via Mobile Device

Nice!!! The painter told me to choose my silver and several different grays and we can put them side by side in the sunlight to determine which looks best!

[Claytona08]

So I was near the tire shop yesterday and stopped to look at my rims because I hadn't actually seen them yet. Snapped a pic while I was there.

[Sodell]

I am not sure where I found this pic but I think it would look nice with the two tone like this, lighter on the very top and bottom and darker on the doors hood, ect. I threw one pic in for fun< lol
[IMG][/IMG]

[Claytona08]

Originally Posted by Sodell

I am not sure where I found this pic but I think it would look nice with the two tone like this, lighter on the very top and bottom and darker on the doors hood, ect. I threw one pic in for fun< lol
[IMG][/IMG]

Man Sodell, that truck is awesome! I love it. Reason I'm doing the scheme I'm doing is because I wanted the F250 that came out like this but never could afford it....lol. I know it was a Ford... on the other hand, is there something you need to tell us?
Posted via Mobile Device

[Claytona08]

Also I love the fact that truck has the factory trim! Could be one of my favorites I have ever seen. Setx, it's hard trust me. I've thought about having them put them on so I can ride around town.....lol
Posted via Mobile Device

[Claytona08]

Posted via Mobile Device
Got a little work done on the truck this weekend. Also got the fender molding, mirror's and body molding removed.
Posted via Mobile Device

[SeTx67]

I don't know how you can stand to have wheels and tires at the tire shop and not on your truck. I know you're trying to wait until after paint but that would drive me crazy
Posted via Mobile Device

[77ChevySharkBite]

Looks good my man!!! The tear down has begun!!!!
Posted via Mobile Device