Show off your Wheels

[Marty68]

51 gmc.

[Marty68]

larger pic of 52 gmc

[Johns327]

Here are my 1976 Cal Chrome 15x10 rear and 15x7 front. Couldn’t afford Cragars when I was a kid so I bought these knock offs. I hit them with some chrome polish but the rust has gotten the better of the fronts. Looked into getting them re-chromed, can buy Cragars for what they wanted. Chrome work is expensive in CA.

[dagnabbitt]

I wanted my truck to look like something someone would have put together in the seventies. Custom made from Wheel Vintiques: six bolt, 17" chrome rallies with derby caps. Truck sits on a 1997 Tahoe chassis so it has that kind of backspacing.

[Driver_WT]

Originally Posted by Johns327

Here are my 1976 Cal Chrome 15x10 rear and 15x7 front. Couldn’t afford Cragars when I was a kid so I bought these knock offs. I hit them with some chrome polish but the rust has gotten the better of the fronts. Looked into getting them re-chromed, can buy Cragars for what they wanted. Chrome work is expensive in CA.

Love those 10 inch wheels on the rear. Looks great.

Wade

[Simple10]

.....

[58 pache]

Sweet ride sneakysnake.

[3757chevy]

I went from rally wheels in full trim to rally wheels with no rings to steelies with stock 72 caps on my '67 just in the last year.

[3757chevy]

Here's a recent pic . I know it's not a 47-59 b b but I couldn't help myself.

[Axememan]

15x8 chrome rally’s 235/75-15 all around

[MALIBLOC]

18x8 and 18x9.5

[nikwho]

Lotta good lookin trucks and wheels in this thread! Here's mine, with a few tire/wheels combos I have had. This truck has a '79 Camaro front clip, done the "No Limit way". It has the 10 bolt rear axle out of the same '79 Camaro

First picture: 18" Foose Legend wheels, 18"x7" in front (4" BS) with 225/40-18 tires. 18"x9" rear (5.25" BS) 275/40-18 BFG G-Force Sport Comp-2 tires. If you corner hard, there's no way that these would fit in stock tub opening. They'd be too close on inside and outside. With my '79 Camaro 10 bolt axle, I have good clearance to fender lip, but rubbed on bedside on both sides.

Second picture: 17" Boyd Coddington Junkyard Dogs, 17"x8" front and rear, 4.5" BS. 225/45-17" up front, and 255/45-17 Cooper tires. These fit, but rubbed while cornering hard. I found that out when I saw burnt paint on the inside of the bed sides. 1/4" spacers would have resolved this.

Third picture:
15" Cragar Chrome Smoothies. 15"x6" up front, with 3.5" back spacing. 15"x8" in rear, with 4.25" BS. BFG Radial T/A's 205/60-15 in front and 245/60-15's in rear. I bought a set of 275/60-15 tires, but would have needed a 1/4" spacer to make them fit without rubbing. This front wheel/tire combination is the only one that I have had that has not rubbed at all.

[Dan in Pasadena]

Originally Posted by MALIBLOC

18x8 and 18x9.5

Curious if your wheels rub and would like to know the backspacing BUT... I guess that wouldn't tell me anything unless I knew what rearend it has and the width of it along with what front suspension it has.

Looks nice though. I really considered those for mine.

[MALIBLOC]

Originally Posted by Dan in Pasadena

Curious if your wheels rub and would like to know the backspacing BUT... I guess that wouldn't tell me anything unless I knew what rearend it has and the width of it along with what front suspension it has.

Looks nice though. I really considered those for mine.

here a thread I did awhile back a 275 tire would rub IMO. I have a uncut gm10bolt , just research things and measure .

truck gets tons of compliments on the wheels the lip and offset look great.

http://67-72chevytrucks.com/vboard/s...d.php?t=796833

Im located in tustin not far from you in you ever wanted to swing by and bolt them on

[NorCalGal]

Oh, DUH! I see you do have a build thread...just have to open my peepers.

[layinrocker65]

Originally Posted by NorCalGal

That’s one nice looking truck there layinrocker65. Looks like you’re keeping us in the dark, we need more info on this build.

Originally Posted by NorCalGal

Oh, DUH! I see you do have a build thread...just have to open my peepers.

Thanks. I dont really update the build thread though. Mostly post it on IG

[toymanbob]

Here's mine, I have four and they fit my project perfectly. Today I fit the front fenders, really I meant the inner fenders as there was serious trimming involved and am one day closer to my first drive. Bob


http://67-72chevytrucks.com/vboard/s...d.php?t=820010

[nikwho]

Here's the third or fourth set of wheels I've had on my '59 Apache. Foose Legend 18x9 and 18x7. BFG 275/40-18 and 225/40-18.

[BBPanel]

[RostaRob]

Not the best picture but here are my tires and wheels on my 58

[youngrodder]

US Mags 22 x 8.5 (F) and 22 x 10 - Concave (R)

Marc

[SFFD103]

Here are my 15x7 and 15x8” chrome Steelies from Speedway Motors and Spider Caps.

[Johns327]

Old wheels, new wheels. 15x7” front and 15x10” rear. New tires dropped the front end about 1”.

[Rickysnickers]

Originally Posted by Johns327

Old wheels, new wheels. 15x7” front and 15x10” rear. New tires dropped the front end about 1”.

Nice!! Somebody else with a long stepper