No Limit's "K-10" - Page 10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**FRENCHBLUE72** · 01-20-2012, 06:49 PM

That floor looks b!tchin... Lots of tacks..

**Dieselwrencher** · 01-20-2012, 08:20 PM

Looking great! I was also curious about the floor too. Seems it wouls be less work to do one piece in each hole rather than strips cut and welded together. Or is that what you had in stock to get it done? That's lots of work for sure. Keep it up, it looks good.

**robnolimit** · 01-20-2012, 08:35 PM

Quote:

Originally Posted by porterbuilt

Dumb question... and just out of curiosity:

I was wondering why you made the sheetmetal on the floor that way? I have never seen it done that way. Didn't know if it was an old school technique that I never got to be a part of, or if it was beneficial in some other way?

Nate are you commenting on my years of experience?? lol. I learned this from my mentor, Yosh, at Electromotive. I made the floor from 22 ga. mostly, with a few slats of 18 ga. mixed in. The slats start 5" wide, then I bend a 5/8" flange at 90* down the edge. This makes the floor really strong and light. The edges under the floor are set at 50*, the ridges help to pull air out from under the car. See Nate, if you were older, you may have seen this in and older GTP car.

**robnolimit** · 01-20-2012, 08:41 PM

Some more updates

tasian · 01-20-2012, 08:48 PM

that floor and whole front end looks sweeet! i think the camaro's need to be scared

**Dieselwrencher** · 01-20-2012, 08:48 PM

Huh, that's interesting. I always fiured smooth was better. I guess I assumed that from seeing the bottom sides of Nacar cars. But I suppse that's different since you aren't always going left.

Nsanehotrodz · 01-20-2012, 10:11 PM

Awesome!

Can you post some pics of how you tied the windshield post into the down bars? Thanks
DeWayne

PBFAB.COM · 01-21-2012, 01:17 AM

Quote:

Originally Posted by robnolimit

Nate are you commenting on my years of experience?? lol. I learned this from my mentor, Yosh, at Electromotive. I made the floor from 22 ga. mostly, with a few slats of 18 ga. mixed in. The slats start 5" wide, then I bend a 5/8" flange at 90* down the edge. This makes the floor really strong and light. The edges under the floor are set at 50*, the ridges help to pull air out from under the car. See Nate, if you were older, you may have seen this in and older GTP car.

That's what I thought it would look like underneath... but wasn't quite sure the reason behind it.... had no clue on the 50* angle flange. Makes perfect sense.

I might be a young whipper-snapper, but experienced enough to know to always ask a question when I don't know the answer!

I am aldo curious, is this scaled down version of the C10 an attempt to take you back to your more youthful days of the mid 80's and early 90's when the mini-trucks were "in"?

SCOTI · 01-21-2012, 02:29 AM

Quote:

Originally Posted by porterbuilt

I am aldo curious, is this scaled down version of the C10 an attempt to take you back to your more youthful days of the mid 80's and early 90's when the mini-trucks were "in"?

Uhmm.... I believe the phrase these young kids use is 'SNAP'.

**67cheby** · 01-21-2012, 10:56 AM

i am sure there are no ..."OLD MINI TRUCKERS" on this site....but if there was it might look something like this...LOL, sorry i wont clutter your killer thread with any more of my old MINI-TRUCKIN days !! LOL

**FRENCHBLUE72** · 01-21-2012, 11:52 AM

Snap a mazdawg..

jbclassix · 01-21-2012, 02:39 PM

So I see the mystery piece sitting on the roof... gonna clue us in on what it will be?

NPilot1975 · 01-21-2012, 03:48 PM

Rob, Outstanding build! I am encouraged to get back to working on my truck but know it is not going to be half as sweet. Quick question about your pedals, can you unbolt the clutch pedal? I want to run the same ones but am going to at least start out with an auto and change to a stick later. Thanx
Posted via Mobile Device

aggie91 · 01-21-2012, 09:45 PM

Rob,

Just took the time to read this whole thing and get caught up on your newest project. I think that yellow would be the best color with a white top.

I really liked your JT project and am doing some of the same stuff on my son's 82 we are building. Are you going to bring JT to the Texas GG's in March?

Can't wait to see more!

808_67C10 · 01-22-2012, 12:02 AM

Damn.. The k10 looks awesome! Lovin da Old School Mazda pics... Best lookin mini trucks! I had 3 of them...
Posted via Mobile Device

**robnolimit** · 01-22-2012, 02:57 PM

Cool picts. Back in the day, when my buddies were into mini trucks and Cal bugs, I was stuck on old chevy's. I build one 'sort of' mini truck, a '55 chevy, 4" section, no top, 3" chopped winshield, and 5' bed. It sat on a cut down GM metric Monte Carlo chassis, with a T-type turbo v-6/auto, on 17" corvette wheels. (they were HUGE). Now I have to see if i can find an old pict of that one.

NP, yes, you can pull the clutch pedal out of the wilwood mount, I'm setting up a Challenger the same way.

Aggie, hope to be in Ft. Worth in the spring. Trying to talk Marcell into driving the JT out for a StreetTrucks road trip.

ohsolowtrent · 01-23-2012, 12:01 AM

Now why would you want to ruin a perfectly good weekend in Ft. Worth by bringing Marcell?

**robnolimit** · 01-23-2012, 12:06 AM

Quote:

Originally Posted by ohsolowtrent

Now why would you want to ruin a perfectly good weekend in Ft. Worth by bringing Marcell?

hahahahhahahahha

68 TT · 01-23-2012, 07:55 PM

Quote:

Originally Posted by 67cheby

i am sure there are no ..."OLD MINI TRUCKERS" on this site....but if there was it might look something like this...LOL, sorry i wont clutter your killer thread with any more of my old MINI-TRUCKIN days !! LOL

Hey, I was pretty good at getting the 195/50-15 tires onto the 15x10 wheels for those guys.

ccracin · 01-24-2012, 09:23 AM

Rob,

I've been a fan of your stuff for a long time. I don't know how I have missed this project all this time. You are building what I had in my head for our next project. I wanted to combine my circle track back ground and trucks! I can't wait to see this thing in person! You going to bring it to Columbus? I am now subscribed! Keep up the great work!

**robnolimit** · 01-24-2012, 05:28 PM

Exhaust

68 TT · 01-24-2012, 05:43 PM

Very nice.

Are you guys thinking about making them for stock C10 chassis applications?

aggie91 · 01-24-2012, 05:54 PM

Tri-Y's...very cool. What size tubing did you use?

**oldman3** · 01-24-2012, 06:33 PM

Nice headers.....Jim

Mechanic77 · 01-25-2012, 11:34 AM

x2 nice headers

Just curious.....how did you determine dimensions on the headers? Like primary length to each Y? I thought long and hard about doing tri-Y's for my truck, but I couldn't find any good information on how to determine primary/secondary pipe length and secondary/collector pipe diameter.......

Thanks, Andy

01-20-2012, 06:49 PM	#226
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,591	Re: No Limit's "K-10" That floor looks b!tchin... Lots of tacks.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

01-20-2012, 08:20 PM	#227
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,140	Re: No Limit's "K-10" Looking great! I was also curious about the floor too. Seems it wouls be less work to do one piece in each hole rather than strips cut and welded together. Or is that what you had in stock to get it done? That's lots of work for sure. Keep it up, it looks good. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

01-20-2012, 08:41 PM	#229
robnolimit Senior Member Join Date: Jul 2010 Location: Dandridge, Tn. USA Posts: 2,226	Re: No Limit's "K-10" Some more updates Attached Images __________________ GoodGuys 2012 Pro-Truck Champion 2012 Truckin' Throwdown Champion GoodGuys 2011 National Champion 2011 Truckin' Throwdown Champion GoodGuys 2010 National Champion Proud to put our products up against all others!

01-20-2012, 08:48 PM	#230
tasian Registered User Join Date: Dec 2009 Location: hangtown, ca Posts: 244	Re: No Limit's "K-10" that floor and whole front end looks sweeet! i think the camaro's need to be scared __________________ Betsy's build 70 c20 4 speed 406sb

01-20-2012, 08:48 PM	#231
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,140	Re: No Limit's "K-10" Huh, that's interesting. I always fiured smooth was better. I guess I assumed that from seeing the bottom sides of Nacar cars. But I suppse that's different since you aren't always going left. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

01-20-2012, 10:11 PM	#232
Nsanehotrodz Registered User Join Date: Jul 2010 Location: White Pine, TN Posts: 1,261	Re: No Limit's "K-10" Awesome! Can you post some pics of how you tied the windshield post into the down bars? Thanks DeWayne __________________ www.nsanehotrodz.com customerservice@nsanehotrodz.com 865-761-0460 Tennessee's #1 HotRod Shop!

01-21-2012, 10:56 AM	#235
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: No Limit's "K-10" i am sure there are no ..."OLD MINI TRUCKERS" on this site....but if there was it might look something like this...LOL, sorry i wont clutter your killer thread with any more of my old MINI-TRUCKIN days !! LOL Attached Images __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

01-21-2012, 11:52 AM	#236
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,591	Re: No Limit's "K-10" Snap a mazdawg.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

01-21-2012, 02:39 PM	#237
jbclassix Junk Yartist Join Date: Jul 2009 Location: Greeley, CO Posts: 2,203	Re: No Limit's "K-10" So I see the mystery piece sitting on the roof... gonna clue us in on what it will be? __________________ -Jeremy YOU ONLY FAIL IF YOU STOP TRYING 70 Crew Cab Build Link 70 GMC Suburban 4X4 build thread 95 Yukon Daily Driver Rebuilding an NP205

01-21-2012, 03:48 PM	#238
NPilot1975 Senior Member Join Date: Aug 2002 Location: Plymouth, MA Posts: 891	Re: No Limit's "K-10" Rob, Outstanding build! I am encouraged to get back to working on my truck but know it is not going to be half as sweet. Quick question about your pedals, can you unbolt the clutch pedal? I want to run the same ones but am going to at least start out with an auto and change to a stick later. Thanx Posted via Mobile Device __________________ 1972 Blazer body...need to get a thread started for the rest of the story

01-21-2012, 09:45 PM	#239
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: No Limit's "K-10" Rob, Just took the time to read this whole thing and get caught up on your newest project. I think that yellow would be the best color with a white top. I really liked your JT project and am doing some of the same stuff on my son's 82 we are building. Are you going to bring JT to the Texas GG's in March? Can't wait to see more! __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square

01-22-2012, 12:02 AM	#240
808_67C10 Registered User Join Date: Sep 2011 Location: Hilo, Hawaii Posts: 1,051	Re: No Limit's "K-10" Damn.. The k10 looks awesome! Lovin da Old School Mazda pics... Best lookin mini trucks! I had 3 of them... Posted via Mobile Device __________________ Frank (Hilo, Hawaii) Trucks, Tacos, and Beer go together like Peanut Butter and Ladies! 85 C/10 SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=760383 67 C/10 SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=489298 79 K5 Blazer SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=657461

01-22-2012, 02:57 PM	#241
robnolimit Senior Member Join Date: Jul 2010 Location: Dandridge, Tn. USA Posts: 2,226	Re: No Limit's "K-10" Cool picts. Back in the day, when my buddies were into mini trucks and Cal bugs, I was stuck on old chevy's. I build one 'sort of' mini truck, a '55 chevy, 4" section, no top, 3" chopped winshield, and 5' bed. It sat on a cut down GM metric Monte Carlo chassis, with a T-type turbo v-6/auto, on 17" corvette wheels. (they were HUGE). Now I have to see if i can find an old pict of that one. NP, yes, you can pull the clutch pedal out of the wilwood mount, I'm setting up a Challenger the same way. Aggie, hope to be in Ft. Worth in the spring. Trying to talk Marcell into driving the JT out for a StreetTrucks road trip. __________________ GoodGuys 2012 Pro-Truck Champion 2012 Truckin' Throwdown Champion GoodGuys 2011 National Champion 2011 Truckin' Throwdown Champion GoodGuys 2010 National Champion Proud to put our products up against all others!

01-23-2012, 12:01 AM	#242
ohsolowtrent Registered User Join Date: Dec 2011 Location: Huntingburg IN Posts: 40	Re: No Limit's "K-10" Now why would you want to ruin a perfectly good weekend in Ft. Worth by bringing Marcell?

01-24-2012, 09:23 AM	#245
ccracin CCTek Join Date: Apr 2007 Location: Rostraver, PA Posts: 235	Re: No Limit's "K-10" Rob, I've been a fan of your stuff for a long time. I don't know how I have missed this project all this time. You are building what I had in my head for our next project. I wanted to combine my circle track back ground and trucks! I can't wait to see this thing in person! You going to bring it to Columbus? I am now subscribed! Keep up the great work! __________________ Chad 68 swb Project http://67-72chevytrucks.com/vboard/s...d.php?t=262840 72 swb Project SOLD http://67-72chevytrucks.com/vboard/s...=1#post3993641 THANKS TO: Hermance Design (www.hermancedesign.com), Paradise Road Rod & Custom, Harry Opfer Welding, Tri-State Machine, Wegner Automotive Research, Nsane Hotrodz (www.nsanehotrodz.com), Clayton Machine Works, CCTek (http://www.candctek.com)



Register or Log In To remove these advertisements.

01-24-2012, 05:28 PM	#246
robnolimit Senior Member Join Date: Jul 2010 Location: Dandridge, Tn. USA Posts: 2,226	Re: No Limit's "K-10" Exhaust Attached Images __________________ GoodGuys 2012 Pro-Truck Champion 2012 Truckin' Throwdown Champion GoodGuys 2011 National Champion 2011 Truckin' Throwdown Champion GoodGuys 2010 National Champion Proud to put our products up against all others!

01-24-2012, 05:43 PM	#247
68 TT Still plays with trucks Join Date: Jul 2009 Location: Spokane, WA Posts: 3,556	Re: No Limit's "K-10" Very nice. Are you guys thinking about making them for stock C10 chassis applications? __________________ miSSed opportunity - ground up creation of an AWD 1994 454 SS that never was http://67-72chevytrucks.com/vboard/s...d.php?t=795577 69 C10 shortbed stepside 400 small block - built like what a super sport truck could have been 69 K20 lwb TBI 350 4L60E NP208 14-bolt Dana-44 w/disc 68 Camaro SS / RS 500hp 439 inch roller cam big block 4L80E 79 Malibu TPI 350 4L60 w/ Z28 steering & sway bars

01-24-2012, 05:54 PM	#248
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: No Limit's "K-10" Tri-Y's...very cool. What size tubing did you use? __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square

01-24-2012, 06:33 PM	#249
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,555	Re: No Limit's "K-10" Nice headers.....Jim __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

01-25-2012, 11:34 AM	#250
Mechanic77 Registered User Join Date: Nov 2010 Location: Burrton, KS Posts: 215	Re: No Limit's "K-10" x2 nice headers Just curious.....how did you determine dimensions on the headers? Like primary length to each Y? I thought long and hard about doing tri-Y's for my truck, but I couldn't find any good information on how to determine primary/secondary pipe length and secondary/collector pipe diameter....... Thanks, Andy __________________ Pro Touring 1964 C10-Under Construction http://67-72chevytrucks.com/vboard/s...d.php?t=441627 Project '65 Short Step Daily Driver http://67-72chevytrucks.com/vboard/s...d.php?t=661948

Register or Log In To remove these advertisements.