1971 c10 stepside - Page 10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

raull · 10-29-2011, 09:23 PM

Quote:

Originally Posted by CC69Rat

you have got to be kidding ..

Are you really? Just sit it in there like it is ! It will be awesome either way. You don't want to grenade your 5.3 man.. Are you going to go though the bottom end too?
Posted via Mobile Device

i dont think im going to mess with it chad . it ill boost it up and see what happens , if 5.3 dosent hold, then itll be fun rebuilding

**67cheby** · 10-29-2011, 09:27 AM

i think a little tear just came to my eye !! WOW

big_al_71 · 10-29-2011, 09:42 AM

Quote:

Originally Posted by 67cheby

i think a little tear just came to my eye !! WOW

Mike there is no crying on this thread!!!!

**67cheby** · 10-29-2011, 10:13 AM

it was tears of joy !!

jmedero · 10-29-2011, 10:29 AM

Nahh that's been done before. I say you get an eco tech out of a cobalt ss and do it up baby!! Lol
Posted via Mobile Device

CC69Rat · 10-29-2011, 10:32 PM

All joking aside, yeah I agree. I was really just kidding around. I'd just sit it in there as is. I like the LS motors. A lot of power and mpg. Mine will be lucky to get 6-8mpg.
Posted via Mobile Device

raull · 10-29-2011, 10:57 PM

lol i get 5 mpg on a cool day if im lucky, big blocks are my favorite , yours and bennette's look sweet , mine came off of a 88 hd chevy truck , it is a 4bolt main and it was rebuild with its factory crank and rods , then added some 30 over forged pistons , mild cam with aluminum heads, something simple , then it began , procharger but with the heat downhere it was nothing but problems with carbs, so i took it appart again down to the short block , so i added a comp cam w 670 lift so it rocks , fully roller , f.a.s.t. efi and set it up to run on strictly e85 fuel as its 105 octane , you can tell the rest just by the pictures , its putting 640 rwhp on a stock bottom end and its running awsome , so back to the 5.3 i want to see how far i can get with it ,no worries

big_al_71 · 10-31-2011, 01:20 PM

Going thru my pictures I found this picture from three years ago when Raul was putting my engine together. time flies when you are having fun.

72BlckButy · 10-31-2011, 05:59 PM

Great pic Al! It's amazing when you take the time to stroll back through your build pics what all you can come across.

big_al_71 · 10-31-2011, 09:01 PM

So true Nate ...
Posted via Mobile Device

Splash4195 · 10-31-2011, 10:43 PM

Wow nice build!

jmedero · 10-31-2011, 10:46 PM

Nice pic. Your engine is very clean man.
Posted via Mobile Device

raull · 11-01-2011, 11:02 AM

how about this set up !!!

raull · 11-01-2011, 11:06 AM

this one has valves closer to t's

**67cheby** · 11-01-2011, 11:25 AM

Quote:

Originally Posted by raull

how about this set up !!!

holy batwings batman........that is sick !!

VA72C10 · 11-01-2011, 12:25 PM

they're both....okay....

raull · 11-01-2011, 09:43 PM

hello boyz , i need a little help deciding , as you know one of the downsides of stepsides is the lack of room for equipment , i lower the truck to its lowest point used a rod for driveshaft purpuse, i will be raising bed panel so i have room to put the tank as u see in pictures , no exhaust will go trough here as its going on the outside of chassis , i cant put it behind rear end as im inatalling gas tank back there , it does not fit anywhere near the sides of bed so i can make work where is at , thoughts please or have u guys seen anything else , thanks

**67cheby** · 11-01-2011, 11:39 PM

i cant post a pic of mine from this computer that i am at now...but if you look somewhere in my build thread i think you could do it like mine !

raull · 11-02-2011, 07:34 AM

thank's mike ill do that

raull · 11-02-2011, 07:49 AM

mike its on page 12 post # 294 , you have a 4link set up ouside the chassis i still have the factory bar set up so that wont work for me , bid advantage with fleetside i saw u have compresors , battery , tank and still have room for a spare engine , lol
thanks

69CST-V · 11-02-2011, 09:47 AM

Raul, Can you run it horizontal along the centerline of the chasssis? Its hard to tell with the angle of the picture. If you crowd it into the center toward the drive shaft then maybe have your brackets drop from the bottom of the bed cross sills. Just a thought hard to tell with out being there with a tape measure.

raull · 11-02-2011, 01:06 PM

thanks Bryce , cross rails are not on there so yes that may work been that no mufflers will be there , ill check later , thanks again

**67cheby** · 11-02-2011, 01:18 PM

that was my thought... i think if it is close to your driveline and raised up you will have plenty room to clear you trailing arms

raull · 11-02-2011, 01:23 PM

yes i think so too , its hard just with looking at pix but now i know what u were trying to tell me , thanks guys

lyrikz · 11-02-2011, 02:22 PM

Quote:

Originally Posted by raull

yes i think so too , its hard just with looking at pix but now i know what u were trying to tell me , thanks guys

Cool looking build.

10-29-2011, 09:27 AM	#2
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 1971 c10 stepside i think a little tear just came to my eye !! WOW __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

10-29-2011, 10:13 AM	#4
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 1971 c10 stepside it was tears of joy !! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

10-29-2011, 10:29 AM	#5
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: 1971 c10 stepside Nahh that's been done before. I say you get an eco tech out of a cobalt ss and do it up baby!! Lol Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

10-29-2011, 10:32 PM	#6
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,207	Re: 1971 c10 stepside All joking aside, yeah I agree. I was really just kidding around. I'd just sit it in there as is. I like the LS motors. A lot of power and mpg. Mine will be lucky to get 6-8mpg. Posted via Mobile Device __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

10-29-2011, 10:57 PM	#7
raull Registered User Join Date: Mar 2009 Location: miramar florida Posts: 1,232	Re: 1971 c10 stepside lol i get 5 mpg on a cool day if im lucky, big blocks are my favorite , yours and bennette's look sweet , mine came off of a 88 hd chevy truck , it is a 4bolt main and it was rebuild with its factory crank and rods , then added some 30 over forged pistons , mild cam with aluminum heads, something simple , then it began , procharger but with the heat downhere it was nothing but problems with carbs, so i took it appart again down to the short block , so i added a comp cam w 670 lift so it rocks , fully roller , f.a.s.t. efi and set it up to run on strictly e85 fuel as its 105 octane , you can tell the rest just by the pictures , its putting 640 rwhp on a stock bottom end and its running awsome , so back to the 5.3 i want to see how far i can get with it ,no worries __________________ check out my build thread 71 c/10 step side 5.3 twin turbo http://67-72chevytrucks.com/vboard/s...d.php?t=485320 raul

10-31-2011, 01:20 PM	#8
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: 1971 c10 stepside Going thru my pictures I found this picture from three years ago when Raul was putting my engine together. time flies when you are having fun. Attached Images __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

10-31-2011, 05:59 PM	#9
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: 1971 c10 stepside Great pic Al! It's amazing when you take the time to stroll back through your build pics what all you can come across. __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

10-31-2011, 09:01 PM	#10
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: 1971 c10 stepside So true Nate ... Posted via Mobile Device __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

10-31-2011, 10:43 PM	#11
Splash4195 Registered User Join Date: Jan 2010 Location: Minnesota Posts: 341	Re: 1971 c10 stepside Wow nice build!

10-31-2011, 10:46 PM	#12
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: 1971 c10 stepside Nice pic. Your engine is very clean man. Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

11-01-2011, 11:02 AM	#13
raull Registered User Join Date: Mar 2009 Location: miramar florida Posts: 1,232	Re: 1971 c10 stepside how about this set up !!! Attached Images __________________ check out my build thread 71 c/10 step side 5.3 twin turbo http://67-72chevytrucks.com/vboard/s...d.php?t=485320 raul

11-01-2011, 11:06 AM	#14
raull Registered User Join Date: Mar 2009 Location: miramar florida Posts: 1,232	Re: 1971 c10 stepside this one has valves closer to t's Attached Images __________________ check out my build thread 71 c/10 step side 5.3 twin turbo http://67-72chevytrucks.com/vboard/s...d.php?t=485320 raul

11-01-2011, 12:25 PM	#16
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: 1971 c10 stepside they're both....okay.... __________________ Looking for a 67-72 swb or blazer project in or around VA.

11-01-2011, 09:43 PM	#17
raull Registered User Join Date: Mar 2009 Location: miramar florida Posts: 1,232	Re: 1971 c10 stepside hello boyz , i need a little help deciding , as you know one of the downsides of stepsides is the lack of room for equipment , i lower the truck to its lowest point used a rod for driveshaft purpuse, i will be raising bed panel so i have room to put the tank as u see in pictures , no exhaust will go trough here as its going on the outside of chassis , i cant put it behind rear end as im inatalling gas tank back there , it does not fit anywhere near the sides of bed so i can make work where is at , thoughts please or have u guys seen anything else , thanks Attached Images __________________ check out my build thread 71 c/10 step side 5.3 twin turbo http://67-72chevytrucks.com/vboard/s...d.php?t=485320 raul

11-01-2011, 11:39 PM	#18
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 1971 c10 stepside i cant post a pic of mine from this computer that i am at now...but if you look somewhere in my build thread i think you could do it like mine ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172



Register or Log In To remove these advertisements.

11-02-2011, 07:34 AM	#19
raull Registered User Join Date: Mar 2009 Location: miramar florida Posts: 1,232	Re: 1971 c10 stepside thank's mike ill do that __________________ check out my build thread 71 c/10 step side 5.3 twin turbo http://67-72chevytrucks.com/vboard/s...d.php?t=485320 raul

11-02-2011, 07:49 AM	#20
raull Registered User Join Date: Mar 2009 Location: miramar florida Posts: 1,232	Re: 1971 c10 stepside mike its on page 12 post # 294 , you have a 4link set up ouside the chassis i still have the factory bar set up so that wont work for me , bid advantage with fleetside i saw u have compresors , battery , tank and still have room for a spare engine , lol thanks __________________ check out my build thread 71 c/10 step side 5.3 twin turbo http://67-72chevytrucks.com/vboard/s...d.php?t=485320 raul

11-02-2011, 09:47 AM	#21
69CST-V Registered User Join Date: Mar 2010 Location: Piper, KS Posts: 683	Re: 1971 c10 stepside Raul, Can you run it horizontal along the centerline of the chasssis? Its hard to tell with the angle of the picture. If you crowd it into the center toward the drive shaft then maybe have your brackets drop from the bottom of the bed cross sills. Just a thought hard to tell with out being there with a tape measure. __________________ Bryce '69 SWB Fleet Still Under Construction Company Trucks Last edited by 69CST-V; 11-02-2011 at 10:39 AM.

11-02-2011, 01:06 PM	#22
raull Registered User Join Date: Mar 2009 Location: miramar florida Posts: 1,232	Re: 1971 c10 stepside thanks Bryce , cross rails are not on there so yes that may work been that no mufflers will be there , ill check later , thanks again __________________ check out my build thread 71 c/10 step side 5.3 twin turbo http://67-72chevytrucks.com/vboard/s...d.php?t=485320 raul

11-02-2011, 01:18 PM	#23
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 1971 c10 stepside that was my thought... i think if it is close to your driveline and raised up you will have plenty room to clear you trailing arms Attached Images __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

11-02-2011, 01:23 PM	#24
raull Registered User Join Date: Mar 2009 Location: miramar florida Posts: 1,232	Re: 1971 c10 stepside yes i think so too , its hard just with looking at pix but now i know what u were trying to tell me , thanks guys __________________ check out my build thread 71 c/10 step side 5.3 twin turbo http://67-72chevytrucks.com/vboard/s...d.php?t=485320 raul

Register or Log In To remove these advertisements.