ls turbo build - Page 10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

69trk · 11-05-2015, 11:13 PM

Yes..comp 54-000-11.....557/.562 @114... recommended from Texas speed

jgh64pkup · 11-06-2015, 01:15 PM

It should put down some power for sure! How must boost do you plan on running?

Crash'd Artwerks · 11-06-2015, 01:23 PM

Quote:

Originally Posted by jgh64pkup

It should put down some power for sure! How must boost do you plan on running?

We can only hope his reply is "All of it!". Hahaha!

jgh64pkup · 11-06-2015, 01:25 PM

He should meet his 800whp goal at about 18psi

69trk · 11-06-2015, 01:56 PM

On the street with pump gas around 10-12 lbs is what I'm thinking...track on e85 I'm not sure yet?

69trk · 11-06-2015, 01:59 PM

Anyone have any coating recommendations here In Oklahoma? Need to either coat all the hotside or wrap....depends on costs.. may leave the headers alone

Wasted Income · 12-02-2015, 05:00 PM

Looking good. I like the aluminum downpipe. Glad I did mine that way too.

Crash'd Artwerks · 12-02-2015, 07:44 PM

What's the reason for doing aluminum versus mild/stainless steel on the downpipe?

boostedc10 · 12-02-2015, 07:47 PM

Quote:

Originally Posted by Wasted Income

Looking good. I like the aluminum downpipe. Glad I did mine that way too.

Who is this guy?

69trk · 12-02-2015, 09:59 PM

Save a little bit on weight...

Jon01 · 12-02-2015, 11:34 PM

Looks good.
I'd run the DP further back or out the side, you're going to hate the drone.
What heads are on the motor?
FWIW, mine made ~650 on 8#.

69trk · 12-03-2015, 12:00 AM

It has a little bit of an angle facing down and out... if it's to loud I'll put a muffler on it...has 706 heads that have been worked.. kind of went overboard on everything for a bigger and better 427 ls for later.. here's a few picts with most of the ac stuff done..I'm getting close..still need some new valve covers, wires and a few small things..

69trk · 12-03-2015, 12:06 AM

Had to move dryer because of inner cooler.. but everything fits very nice...

Wasted Income · 12-03-2015, 12:50 PM

Quote:

Originally Posted by Crash'd Artwerks

What's the reason for doing aluminum versus mild/stainless steel on the downpipe?

It's actually significantly lighter than a stainless downpipe / exhaust...and it's just badazz.

Quote:

Originally Posted by boostedc10

Who is this guy?

Oh, herro round eye.

low69chevy · 12-06-2015, 10:01 AM

Quote:

Originally Posted by 69trk

Hotside about done

Nice progress hadn't seen this build in a while by any chance do you have any close up piks how u tied in the hotside pipes to the turbo trying to get ideas for mine similar to yours I like the way this one turned out cause both banks look pretty close in length I've seen some with the drivers side all the way to the passenger then the pass just with a 90 to the turbo and like the way this one turned out keep up the good work

69trk · 12-06-2015, 10:13 PM

Thanks..I'll get some better pics when I pull the turbo off to wrap the hotside..

prostreet1967 · 01-19-2016, 03:29 PM

Quote:

Originally Posted by 69trk

my hydraboost came in today.... just ordered my turbo... it's a borgwarner s475

What s475 did u go with?

fast70swb · 01-19-2016, 05:21 PM

69trk that is a nice looking truck. Just seen you live in bridgecreek I also live in bridgecreek. I'm building a twin turbo 70 swb now. But have a long way to go. Do you ever take it to the car shows in tri city when they have them?

69trk · 01-19-2016, 07:36 PM

Quote:

Originally Posted by prostreet1967

What s475 did u go with?

I went with the 1.32 ar Bws476 76mm

69trk · 01-19-2016, 07:37 PM

Quote:

Originally Posted by fast70swb

69trk that is a nice looking truck. Just seen you live in bridgecreek I also live in bridgecreek. I'm building a twin turbo 70 swb now. But have a long way to go. Do you ever take it to the car shows in tri city when they have them?

Small world.. I have not taken the truck anywhere in about 6 years..but plan on it this year.. I need to come check out your truck..

prostreet1967 · 01-19-2016, 07:52 PM

Quote:

Originally Posted by 69trk

I went with the 1.32 ar Bws476 76mm

Ok, just curious I'm building similar with 1.1 ar

mcbassin · 01-20-2016, 08:48 AM

Very nice progress on the engine. Looking forward to hearing this puppy this year....hopefully....

fast70swb · 01-20-2016, 12:32 PM

Nothing to much to see yet but when i get something to look at i will let you know. Haha. I dropped the motor and transmission in for fitment and set the cab back on it so I can figure out where to mount the computer. Got the wiring harness all broken apart to build my own.. once that gets done then the frame goes for sand blasting and powered coating. Got rust to fix on the cab . I like the way your truck looks tho. .

69trk · 01-31-2016, 10:43 PM

Wrapped the down pipe and some of the hotside...also finished all the ac stuff....need valve covers, wires, turbo blanket, finish up the plumbing on the wastegates and 10an drain for the turbo..

fast70swb · 01-31-2016, 11:04 PM

Looks good. Nice clean work. Can't wait to get to that stage..

11-05-2015, 11:13 PM	#226
69trk Registered User Join Date: Oct 2006 Location: bridgecreek ok. Posts: 1,214	Re: ls turbo build Yes..comp 54-000-11.....557/.562 @114... recommended from Texas speed __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=494388 431 big block times, changed to a 6.0 ls with turbo 1.58- 60' 7.18- 1/8th mile@95.18 11.37- 1/4 @115.81

11-06-2015, 01:15 PM	#227
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: ls turbo build It should put down some power for sure! How must boost do you plan on running? __________________ Gage 1967 C10 Shortbed Stepside

11-06-2015, 01:25 PM	#229
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: ls turbo build He should meet his 800whp goal at about 18psi __________________ Gage 1967 C10 Shortbed Stepside

11-06-2015, 01:56 PM	#230
69trk Registered User Join Date: Oct 2006 Location: bridgecreek ok. Posts: 1,214	Re: ls turbo build On the street with pump gas around 10-12 lbs is what I'm thinking...track on e85 I'm not sure yet? __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=494388 431 big block times, changed to a 6.0 ls with turbo 1.58- 60' 7.18- 1/8th mile@95.18 11.37- 1/4 @115.81

11-06-2015, 01:59 PM	#231
69trk Registered User Join Date: Oct 2006 Location: bridgecreek ok. Posts: 1,214	Re: ls turbo build Anyone have any coating recommendations here In Oklahoma? Need to either coat all the hotside or wrap....depends on costs.. may leave the headers alone __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=494388 431 big block times, changed to a 6.0 ls with turbo 1.58- 60' 7.18- 1/8th mile@95.18 11.37- 1/4 @115.81

12-02-2015, 05:00 PM	#232
Wasted Income Boosted Member Join Date: May 2002 Location: Mackinaw, IL Posts: 2,200	Re: ls turbo build Looking good. I like the aluminum downpipe. Glad I did mine that way too. __________________ 1972 2wd K/5 Blazer Turbocharged 370 LSx - 941 rwhp / 1093 rwtq 1969 Chevy K-10 L33 5.3 / 4L80E / NP241 / 4" lift 1964 Buick Skylark Twin TURBO 383 LS pro-touring project 2014 VW Passat TDI - Daily Driver Turbo diesel 2015 Sierra Denali HD Duramax Turbo diesel 2023 Ford Explorer ST - Twin Turbskis 2023 Ford F150 RCSB - Whipple Supercharged 2017 Polaris RZR Turbo 2014 Nor-Tech Center Console - Twin Supercharged Outboards *TURBO ALL THE THINGS!!*

12-02-2015, 07:44 PM	#233
Crash'd Artwerks Registered User Join Date: May 2011 Location: McKinney, TEXAS ! Posts: 84	Re: ls turbo build What's the reason for doing aluminum versus mild/stainless steel on the downpipe?

12-02-2015, 09:59 PM	#235
69trk Registered User Join Date: Oct 2006 Location: bridgecreek ok. Posts: 1,214	Re: ls turbo build Save a little bit on weight... __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=494388 431 big block times, changed to a 6.0 ls with turbo 1.58- 60' 7.18- 1/8th mile@95.18 11.37- 1/4 @115.81

12-02-2015, 11:34 PM	#236
Jon01 Registered User Join Date: Nov 2012 Location: West Des Moines, Iowa Posts: 450	Re: ls turbo build Looks good. I'd run the DP further back or out the side, you're going to hate the drone. What heads are on the motor? FWIW, mine made ~650 on 8#. __________________ 64 Biscayne - 230/PG, Accuair E-Level, 18/20 Bonneville C's. 68 Charger R/T - #'s matching 440/auto car, 499/727/3.91. 68 GTX - 440/4-speed, Dana 60. 44,000 miles. 71 SWB C10 - LQ4+S476r 06 Duramax - LBZ - Exhaust, EFI Live, etc...

12-03-2015, 12:00 AM	#237
69trk Registered User Join Date: Oct 2006 Location: bridgecreek ok. Posts: 1,214	Re: ls turbo build It has a little bit of an angle facing down and out... if it's to loud I'll put a muffler on it...has 706 heads that have been worked.. kind of went overboard on everything for a bigger and better 427 ls for later.. here's a few picts with most of the ac stuff done..I'm getting close..still need some new valve covers, wires and a few small things.. Attached Images __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=494388 431 big block times, changed to a 6.0 ls with turbo 1.58- 60' 7.18- 1/8th mile@95.18 11.37- 1/4 @115.81

12-03-2015, 12:06 AM	#238
69trk Registered User Join Date: Oct 2006 Location: bridgecreek ok. Posts: 1,214	Re: ls turbo build Had to move dryer because of inner cooler.. but everything fits very nice... Attached Images __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=494388 431 big block times, changed to a 6.0 ls with turbo 1.58- 60' 7.18- 1/8th mile@95.18 11.37- 1/4 @115.81

12-06-2015, 10:13 PM	#241
69trk Registered User Join Date: Oct 2006 Location: bridgecreek ok. Posts: 1,214	Re: ls turbo build Thanks..I'll get some better pics when I pull the turbo off to wrap the hotside.. Attached Images __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=494388 431 big block times, changed to a 6.0 ls with turbo 1.58- 60' 7.18- 1/8th mile@95.18 11.37- 1/4 @115.81

01-19-2016, 05:21 PM	#243
fast70swb Registered User Join Date: Apr 2014 Location: Bridge Creek , Oklahoma Posts: 69	Re: ls turbo build 69trk that is a nice looking truck. Just seen you live in bridgecreek I also live in bridgecreek. I'm building a twin turbo 70 swb now. But have a long way to go. Do you ever take it to the car shows in tri city when they have them?

01-20-2016, 08:48 AM	#247
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: ls turbo build Very nice progress on the engine. Looking forward to hearing this puppy this year....hopefully.... __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

01-20-2016, 12:32 PM	#248
fast70swb Registered User Join Date: Apr 2014 Location: Bridge Creek , Oklahoma Posts: 69	Re: ls turbo build Nothing to much to see yet but when i get something to look at i will let you know. Haha. I dropped the motor and transmission in for fitment and set the cab back on it so I can figure out where to mount the computer. Got the wiring harness all broken apart to build my own.. once that gets done then the frame goes for sand blasting and powered coating. Got rust to fix on the cab . I like the way your truck looks tho. .



Register or Log In To remove these advertisements.

01-31-2016, 10:43 PM	#249
69trk Registered User Join Date: Oct 2006 Location: bridgecreek ok. Posts: 1,214	Re: ls turbo build Wrapped the down pipe and some of the hotside...also finished all the ac stuff....need valve covers, wires, turbo blanket, finish up the plumbing on the wastegates and 10an drain for the turbo.. Attached Images __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=494388 431 big block times, changed to a 6.0 ls with turbo 1.58- 60' 7.18- 1/8th mile@95.18 11.37- 1/4 @115.81

01-31-2016, 11:04 PM	#250
fast70swb Registered User Join Date: Apr 2014 Location: Bridge Creek , Oklahoma Posts: 69	Re: ls turbo build Looks good. Nice clean work. Can't wait to get to that stage..

Register or Log In To remove these advertisements.