Pops 72 cheyenne dropmember build - Page 10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Chapstr's65 · 02-24-2011, 09:17 AM

Quote:

Originally Posted by chapster

Very nice build, actually I just finish reading all of your builds and all I can say is "very impressive".

Your quality of workmanship and attention to detail is outstanding. looking forward to following along.

Hey where did your user name come from. I have been using mine as just Chapstr since I bought an xbox 360 in 05. Stole mine from Napstr and combined it with my last name Chapa.

Posted via Mobile Device

bcutt · 02-24-2011, 09:45 AM

Love the black, love the wheels... not to mention that frame looks bad ass

Hope my 72 turns out half as nice

**superflysteiny** · 02-25-2011, 01:10 PM

Quote:

Originally Posted by Hart_Rod

Smaller ones?

I would do it in a heart beat if you were closer. I love to paint and in the past have done a lot of my own work. But I am just so swamped with work and my family and these frames I just don't have the extra time to paint.

Posted via Mobile Device

**superflysteiny** · 02-25-2011, 01:13 PM

Quote:

Originally Posted by Chapstr's65

Hey where did your user name come from. I have been using mine as just Chapstr since I bought an xbox 360 in 05. Stole mine from Napstr and combined it with my last name Chapa.

Posted via Mobile Device

My user name came fro me my bike racing years and out door motocross. Superfly is what mt dad called me because people would say I was smooth and fast on a bike and motorcycle. The steiny is what I was called by my team mates in football. From the time I was a kid until I was through collage. So I combined the 2
Posted via Mobile Device

**superflysteiny** · 02-25-2011, 01:17 PM

Quote:

Originally Posted by bcutt

Love the black, love the wheels... not to mention that frame looks bad ass

Hope my 72 turns out half as nice

Thanks man, your truck will turn out great just take your time, I find my self sometimes building very fast because I want it done and I have to tell myself to slow down. It's a marathon not a sprint

Posted via Mobile Device

bcutt · 02-26-2011, 09:59 AM

Quote:

Originally Posted by superflysteiny

Thanks man, your truck will turn out great just take your time, I find my self sometimes building very fast because I want it done and I have to tell myself to slow down. It's a marathon not a sprint

Posted via Mobile Device

Yea I keep telling myself everything I do is progress. Your builds are definitely motivation, thanks for sharing your awesome work

Posted via Mobile Device
Posted via Mobile Device

Posi12Bolt · 02-26-2011, 11:20 AM

Hey, need anymore friends!? ha!

I will need your powder coater hookup in the coming months for my '72...

I had seen "second chance" on BJ before seeing the build here, then recognized it on here. Looked through the whole build, and now this one. You da man...man!

~Brian

**superflysteiny** · 02-26-2011, 12:02 PM

Quote:

Originally Posted by Posi12Bolt

Hey, need anymore friends!? ha!

I will need your powder coater hookup in the coming months for my '72...

I had seen "second chance" on BJ before seeing the build here, then recognized it on here. Looked through the whole build, and now this one. You da man...man!

~Brian

Brian let me know when you want to get the work done I will point you in the right dirrection.

**superflysteiny** · 02-26-2011, 12:03 PM

Quote:

Originally Posted by bcutt

Yea I keep telling myself everything I do is progress. Your builds are definitely motivation, thanks for sharing your awesome work

Posted via Mobile Device
Posted via Mobile Device

Thanks man more pics will and should be up by the end of the weekend.

**superflysteiny** · 02-28-2011, 01:19 AM

Well I got alot done should have the brakes done tomorrow and then the bed is going back on. I put 411 gears in the truck with posi. Let me know what you guys think. Thanks

**superflysteiny** · 02-28-2011, 01:20 AM

hgs_notes · 02-28-2011, 01:27 AM

Outstanding, but I hope your running an overdrive with those gears.

VA72C10 · 02-28-2011, 01:36 AM

Beauty!!!

**superflysteiny** · 02-28-2011, 01:39 AM

No way man stop light to stop light brother. Plus 29 inch tires it will be fine. my burb had 411 with 17 and it did 70 all day long

bcutt · 02-28-2011, 07:11 AM

Looking badass!! I love the brakes with your choice of wheels. Are you going to run a one or two piece driveshaft? I noticed on your project "Second Chance" you ran a two piece and I've always wondered how that held up to the blown motor? I plan on running some serious HP in my 72 but have always questioned whether a two piece drive shaft would be a week link or not. Thanks for the pics and keep em coming

Posted via Mobile Device

1stchevy · 02-28-2011, 07:15 AM

I'm jealous!

**67cheby** · 02-28-2011, 10:18 AM

WOW...cant wait to see the body setting back on !!!!

68 Quad C10 · 02-28-2011, 11:17 AM

looking great

**superflysteiny** · 02-28-2011, 03:01 PM

Quote:

Originally Posted by bcutt

Looking badass!! I love the brakes with your choice of wheels. Are you going to run a one or two piece driveshaft? I noticed on your project "Second Chance" you ran a two piece and I've always wondered how that held up to the blown motor? I plan on running some serious HP in my 72 but have always questioned whether a two piece drive shaft would be a week link or not. Thanks for the pics and keep em coming

Posted via Mobile Device

I have to run a 2 piece. Find a good drive line shopand have them build you a bullet proof drive line. I have had no issues with the 2 piece. Hope that helps.

65Pickup · 02-28-2011, 03:09 PM

Quote:

Originally Posted by superflysteiny

I have to run a 2 piece. Find a good drive line shopand have them build you a bullet proof drive line. I have had no issues with the 2 piece. Hope that helps.

Did you test that drive shaft in the 'Second Chance' truck? Full pull?

Love this build for your Dad, it sure shows us what can be done in a short time, and with a quality starting point. Well your dedication and mad skills help too.

**superflysteiny** · 02-28-2011, 05:26 PM

Quote:

Originally Posted by 65Pickup

Did you test that drive shaft in the 'Second Chance' truck? Full pull?

Love this build for your Dad, it sure shows us what can be done in a short time, and with a quality starting point. Well your dedication and mad skills help too.

Thanks man and to answer the question. I hammered the 67 from a dead stop and had no drive line issues what so ever. Of course I had a ton of wheel spin. I think a truck is so light in the rear end it should not be an issue. That being said if you were running prostreet set up and you were able to get the truck to hook you cauld have some issues. But most of us are not doing the prostreet look and most of us are not trying to build 10 sec drag trucks. So that why I feel you should be able to build a a two piece driveline that can take the tq and hp.

65Pickup · 02-28-2011, 09:49 PM

Quote:

Originally Posted by superflysteiny

Thanks man and to answer the question. I hammered the 67 from a dead stop and had no drive line issues what so ever. Of course I had a ton of wheel spin. I think a truck is so light in the rear end it should not be an issue. That being said if you were running prostreet set up and you were able to get the truck to hook you cauld have some issues. But most of us are not doing the prostreet look and most of us are not trying to build 10 sec drag trucks. So that why I feel you should be able to build a a two piece driveline that can take the tq and hp.

I agree with you, I'm just fishing for knowledge from guys with experience. I've got a serious sbc going in right now, but really like this drop member stuff. So with that stout engine in Second Chance, you seemed like the guy to ask. Its hard not to step on it at least once.

Rumor has it Nate is working on a static height, coil over drop member; that will be interesting to me, perhaps the split drive shaft won't be necessary. Thanks for the info.

65Pickup · 02-28-2011, 10:02 PM

Double post oops.

mcbassin · 02-28-2011, 10:22 PM

Hey, the chassis looks great! I love the satin black, it's so smooth.

chapster · 02-28-2011, 11:49 PM

Rolling chassis looks sweet, can,t wait to see it with some sheet metal!!

02-24-2011, 09:45 AM	#227
bcutt Registered User Join Date: Aug 2008 Location: North GA Posts: 400	Re: Pops 72 cheyenne dropmember build Love the black, love the wheels... not to mention that frame looks bad ass Hope my 72 turns out half as nice __________________ "Some of my finest hours have been spent on my back veranda, smoking hemp and observing as far as my eye can see." - Thomas Jefferson 72 C10 SWB "Work in Progress"

02-26-2011, 11:20 AM	#232
Posi12Bolt Registered User Join Date: Jan 2011 Location: Vacaville, Cali Posts: 26	Re: Pops 72 cheyenne dropmember build Hey, need anymore friends!? ha! I will need your powder coater hookup in the coming months for my '72... I had seen "second chance" on BJ before seeing the build here, then recognized it on here. Looked through the whole build, and now this one. You da man...man! ~Brian __________________ 2011 GMC Yukon XL - Denali/Escalade Mutt 2003 Moomba Mobius LSx Swap'd 1987 IROC-Z Original 90k miles, 2nd owner 1972 Chevy C10 - Dropped & Shaved 1970 Chevelle SS396 - currently in Body-off Resto 1970 Chevelle (LSx TT 4x4/SUV Chassis Project)

02-28-2011, 01:19 AM	#235
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Pops 72 cheyenne dropmember build Well I got alot done should have the brakes done tomorrow and then the bed is going back on. I put 411 gears in the truck with posi. Let me know what you guys think. Thanks __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell Last edited by superflysteiny; 02-28-2011 at 01:24 AM.

02-28-2011, 01:20 AM	#236
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Pops 72 cheyenne dropmember build __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

02-28-2011, 01:27 AM	#237
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,126	Re: Pops 72 cheyenne dropmember build Outstanding, but I hope your running an overdrive with those gears. __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff

02-28-2011, 01:36 AM	#238
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Pops 72 cheyenne dropmember build Beauty!!! __________________ Looking for a 67-72 swb or blazer project in or around VA.

02-28-2011, 01:39 AM	#239
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Pops 72 cheyenne dropmember build No way man stop light to stop light brother. Plus 29 inch tires it will be fine. my burb had 411 with 17 and it did 70 all day long __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell Last edited by superflysteiny; 02-28-2011 at 01:40 AM.

02-28-2011, 07:11 AM	#240
bcutt Registered User Join Date: Aug 2008 Location: North GA Posts: 400	Re: Pops 72 cheyenne dropmember build Looking badass!! I love the brakes with your choice of wheels. Are you going to run a one or two piece driveshaft? I noticed on your project "Second Chance" you ran a two piece and I've always wondered how that held up to the blown motor? I plan on running some serious HP in my 72 but have always questioned whether a two piece drive shaft would be a week link or not. Thanks for the pics and keep em coming Posted via Mobile Device __________________ "Some of my finest hours have been spent on my back veranda, smoking hemp and observing as far as my eye can see." - Thomas Jefferson 72 C10 SWB "Work in Progress"

02-28-2011, 07:15 AM	#241
1stchevy Registered User Join Date: Jan 2010 Location: Randleman, NC Posts: 785	Re: Pops 72 cheyenne dropmember build I'm jealous!

02-28-2011, 10:18 AM	#242
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Pops 72 cheyenne dropmember build WOW...cant wait to see the body setting back on !!!! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

02-28-2011, 11:17 AM	#243
68 Quad C10 Registered User Join Date: Jul 2009 Location: Idaho Falls Posts: 324	Re: Pops 72 cheyenne dropmember build looking great __________________ http://www.tandscustomcars.com/ My Quad Cab build:http://67-72chevytrucks.com/vboard/s...d.php?t=352342 IT"S GOT A ROOF NOW WHOO HOO!!!! 65 GTO Build (If you wanna check it out) http://67-72chevytrucks.com/vboard/s...40#post4503040

02-28-2011, 10:02 PM	#248
65Pickup Registered User Join Date: Jun 2010 Location: Vancouver Island BC Posts: 652	Re: Pops 72 cheyenne dropmember build Double post oops. __________________ Last edited by 65Pickup; 02-28-2011 at 10:05 PM.

02-28-2011, 10:22 PM	#249
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: Pops 72 cheyenne dropmember build Hey, the chassis looks great! I love the satin black, it's so smooth. __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

02-28-2011, 11:49 PM	#250
chapster Registered User Join Date: Jul 2005 Location: .. Posts: 455	Re: Pops 72 cheyenne dropmember build Rolling chassis looks sweet, can,t wait to see it with some sheet metal!! __________________ 1967 GMC shorty Parts Pile: NoLimit, Accu Air, Kore 3, Matts Classic Bowtie, March Performance, Lokar, ScottsHot Rods, Vintage Air, American Auto Wire, Circle D, Accu Air, Borla, Budnik, Ididit, One Piece Windows, Doug Thorley, Pypes, AutoLoc, Porterbuilt, CPP, Dynamat, Dakota Digital, Fesler 1968 Chevy c10 shorty Stepper (Patina LS project) 1967 gmc custom Long Box (Farm Truck Project)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.