![]() |
![]() |
#226 |
6>8 Plugless........
![]() Join Date: Sep 2007
Location: Prairie City, Ia
Posts: 17,140
|
Re: Finally starting my Longhorn 4x4 conversion
This morning it was dang cold in the shop and took a little while for the lights to kick on. I had to open the walk in door for some light, so needless to say I didn't get much done before I had to come to work. Once it got warm enough in there for my compressor to fire up I did get a little done. I cut the seat brackets on the dodge seat, and I removed my gas tank. I'm going to take the tank down and have it checked and cleaned before I try to use it. I thought it had to be half full with as bad as it smelled of varnish. I was wrong, it was empty.
![]() ![]()
__________________
Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project Tired of spark plugs? Check this out. |
![]() |
![]() |
![]() |
#227 |
Junk Yartist
Join Date: Jul 2009
Location: Greeley, CO
Posts: 2,203
|
Re: Finally starting my Longhorn 4x4 conversion
Hey, I finally got around to digging the wheels out from under my burb. Turns out the ones on the 91 square are the same as IFS trucks... I have 4.25 back spacing and 2.25 front... both are 16X6.5
__________________
-Jeremy YOU ONLY FAIL IF YOU STOP TRYING 70 Crew Cab Build Link 70 GMC Suburban 4X4 build thread 95 Yukon Daily Driver Rebuilding an NP205 |
![]() |
![]() |
![]() |
#228 |
6>8 Plugless........
![]() Join Date: Sep 2007
Location: Prairie City, Ia
Posts: 17,140
|
Re: Finally starting my Longhorn 4x4 conversion
Thanks. I need to remove 2 of my wheels and see what they are.
__________________
Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project Tired of spark plugs? Check this out. |
![]() |
![]() |
![]() |
#229 |
6>8 Plugless........
![]() Join Date: Sep 2007
Location: Prairie City, Ia
Posts: 17,140
|
Re: Finally starting my Longhorn 4x4 conversion
Yesterday I started making my 04 dodge seat fit in the 72 cab. I cut the bottoms off the dodge brackets and used some original bolt holes for the seat and started building the brackets. I have half of the LH side done. I'll have to remove it to finish weld it all.
![]() ![]() ![]() ![]() Rear seat brackets ![]() Front ![]()
__________________
Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project Tired of spark plugs? Check this out. Last edited by Dieselwrencher; 02-06-2011 at 04:27 PM. |
![]() |
![]() |
![]() |
#230 |
Second Chance Program
Join Date: Jun 2006
Location: Portland, OR
Posts: 2,642
|
Re: Finally starting my Longhorn 4x4 conversion
Looks really good! They look like they fit well and the frames look stout!
|
![]() |
![]() |
![]() |
#231 |
GMC's n H.D.'s too!
![]() Join Date: Oct 2010
Location: Nampa, Idaho
Posts: 1,583
|
Re: Finally starting my Longhorn 4x4 conversion
Seats look good in there!!
|
![]() |
![]() |
![]() |
#232 |
Registered User
Join Date: Mar 2008
Location: Coggon, IA
Posts: 580
|
Re: Finally starting my Longhorn 4x4 conversion
as far as hanging the suspension to your frame were there any existing holes to use as starting points or were all holes added by yourself? I will also be using mid 70's 3/4ton chevy 4x4 gear on my 71 swb 2wd frame.
Thanks, David |
![]() |
![]() |
![]() |
#233 |
6>8 Plugless........
![]() Join Date: Sep 2007
Location: Prairie City, Ia
Posts: 17,140
|
Re: Finally starting my Longhorn 4x4 conversion
Thanks guys. I wasn't happy with how far back I couldn't get the seat due to the gas tank. But for now I will have to keep the in cab tank until I do my crew cab build. Then I plan on putting a big tank under the cab and box mid frame inside the frame rail.
David, The only holes I was able to use were the radiator support mount holes and the shock mounting holes. All the shackle mount holes I had to drill. You might be able to use some stock holes for your engine cross member, but IDK since I built a different one to fit my engine.
__________________
Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project Tired of spark plugs? Check this out. |
![]() |
![]() |
![]() |
#234 |
Registered User
Join Date: Mar 2008
Location: Coggon, IA
Posts: 580
|
Re: Finally starting my Longhorn 4x4 conversion
as for the shackle mount holes what's the best method to find their home? have the cab and front clip on and center in the wheel well? didn't know since my frame is completely stripped.
|
![]() |
![]() |
![]() |
#235 |
6>8 Plugless........
![]() Join Date: Sep 2007
Location: Prairie City, Ia
Posts: 17,140
|
Re: Finally starting my Longhorn 4x4 conversion
When I did this truck, I used 73 up front springs. I placed a front axle under the springs and mocked the shackles in coordination to my marks from my 72 Blazer frame. I ended up moving the holes back about 1" so the shackle geometry was better. I can measure mine for you if you'd like.
__________________
Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project Tired of spark plugs? Check this out. |
![]() |
![]() |
![]() |
#236 |
6>8 Plugless........
![]() Join Date: Sep 2007
Location: Prairie City, Ia
Posts: 17,140
|
Re: Finally starting my Longhorn 4x4 conversion
No real great progress this week. I have been busy with the super cold weather, work, and I got a cold that has been slowing me down. But I did manage to go get some paint for my gauge cluster needles. I tore apart my cluster I got from Toomuchstuff. He included some nicer gauges than what some of the ones in the cluster were. I cleaned everything up, and man were the tins nasty due to a leaking oil pressure line. I had my wife paint the needles while I repaired my odometer. She even painted the red line areas because they were faded really bad. She did a great job! Then I polished the lens a little bit. I tried not to ruin the markings on it because I'm pretty sure no one has any of these in stock anywhere. It came out pretty good. i will install my new repop wood grain bezel when it gets here and then this cluster should be done until I get some LED bulbs for it.
Before ![]() After ![]() ![]() ![]() ![]()
__________________
Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project Tired of spark plugs? Check this out. |
![]() |
![]() |
![]() |
#237 |
Registered User
Join Date: Mar 2010
Location: Des Moines, IA
Posts: 203
|
Re: Finally starting my Longhorn 4x4 conversion
Looks great Ryan Im hoping to get something done this weekend now that it's going to be above 0 but I also have a bad cold and it's kicked my ass
Posted via Mobile Device |
![]() |
![]() |
![]() |
#238 |
6>8 Plugless........
![]() Join Date: Sep 2007
Location: Prairie City, Ia
Posts: 17,140
|
Re: Finally starting my Longhorn 4x4 conversion
I know the feeling. It sucks. I hope you get well soon Joe!
__________________
Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project Tired of spark plugs? Check this out. |
![]() |
![]() |
![]() |
#239 |
Registered User
Join Date: Feb 2010
Location: Parsons, KS
Posts: 357
|
Re: Finally starting my Longhorn 4x4 conversion
you can do my gauges next
![]()
__________________
James 94' Chevy K1500 Extended Cab 4x4 5.7 72' Chevy LWB K10, 350, SM465, NP205 Project "Daily Driver" |
![]() |
![]() |
![]() |
#240 |
6>8 Plugless........
![]() Join Date: Sep 2007
Location: Prairie City, Ia
Posts: 17,140
|
Re: Finally starting my Longhorn 4x4 conversion
Send them up if you want. It will give my wife something to do.
![]() ![]()
__________________
Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project Tired of spark plugs? Check this out. |
![]() |
![]() |
![]() |
#241 |
Registered User
Join Date: Feb 2010
Location: Parsons, KS
Posts: 357
|
Re: Finally starting my Longhorn 4x4 conversion
haha im sure she would really appreciate that. probably better worry about getting them to work before i worry how they look
![]()
__________________
James 94' Chevy K1500 Extended Cab 4x4 5.7 72' Chevy LWB K10, 350, SM465, NP205 Project "Daily Driver" |
![]() |
![]() |
![]() |
#242 | |
6>8 Plugless........
![]() Join Date: Sep 2007
Location: Prairie City, Ia
Posts: 17,140
|
Re: Finally starting my Longhorn 4x4 conversion
Quote:
![]() ![]()
__________________
Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project Tired of spark plugs? Check this out. |
|
![]() |
![]() |
![]() |
#243 |
Registered User
Join Date: Feb 2010
Location: Parsons, KS
Posts: 357
|
Re: Finally starting my Longhorn 4x4 conversion
sounds like we are in the same boat haha i got oil pressure and fuel level but nothing else
__________________
James 94' Chevy K1500 Extended Cab 4x4 5.7 72' Chevy LWB K10, 350, SM465, NP205 Project "Daily Driver" |
![]() |
![]() |
![]() |
#244 |
Registered User
Join Date: Mar 2008
Location: Coggon, IA
Posts: 580
|
Re: Finally starting my Longhorn 4x4 conversion
yea if you could get some measurements that would be great. i'm using 73+ springs as well, just a swb instead of lwb. Thanks!
|
![]() |
![]() |
![]() |
#245 |
Chevy Enthusiast
Join Date: Jul 2009
Location: Canyon Lake Texas
Posts: 2,024
|
Re: Finally starting my Longhorn 4x4 conversion
What about 73+ stock 52" rear springs for the front?
__________________
Tony 1985 GMC K2500 restoration Project: Rust, White & Blue 1989 Chevy R3500 CC Cummins & 4X4 swap some day... 1989 Burb (D60, 14BFF, 12V, NV4500, NP205, 37" tires in progress) |
![]() |
![]() |
![]() |
#246 |
6>8 Plugless........
![]() Join Date: Sep 2007
Location: Prairie City, Ia
Posts: 17,140
|
Re: Finally starting my Longhorn 4x4 conversion
You could use them, but I already had 4" factory length 73 up springs, and I didn't want to purchase new spring mounts I already had bolted on.
![]()
__________________
Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project Tired of spark plugs? Check this out. |
![]() |
![]() |
![]() |
#247 |
Chevy Enthusiast
Join Date: Jul 2009
Location: Canyon Lake Texas
Posts: 2,024
|
Re: Finally starting my Longhorn 4x4 conversion
Haha alright, well i guess coggonobrien could use them.
__________________
Tony 1985 GMC K2500 restoration Project: Rust, White & Blue 1989 Chevy R3500 CC Cummins & 4X4 swap some day... 1989 Burb (D60, 14BFF, 12V, NV4500, NP205, 37" tires in progress) |
![]() |
![]() |
![]() |
#248 |
Currently Blazerless
Join Date: Apr 2000
Location: St. Joseph Mo.
Posts: 4,827
|
Re: Finally starting my Longhorn 4x4 conversion
Good score on the tach cluster..thats a hard one to come by! Your build is really starting to come together.
__________________
1972 C/30 133" W.B. C&C 1970 GMC 3500 157" W.B. single wheel C&C |
![]() |
![]() |
![]() |
#249 | |
Registered User
Join Date: Jan 2010
Location: columbus, ohio
Posts: 972
|
Re: Finally starting my Longhorn 4x4 conversion
Quote:
So glad I clicked on your build. I have an 02' Dodge as my DD, and wonder'd how the seat would look in my 67', because I really like the storage space, and that the middle section folds down to an arm rest. How do you like the headrest on there, do they seem like they are in the way? Also are you planning to recover them? Sorry for all the Q's, it's just kind of exciting to see something that you want to do will actually work. ![]() |
|
![]() |
![]() |
![]() |
#250 | |
6>8 Plugless........
![]() Join Date: Sep 2007
Location: Prairie City, Ia
Posts: 17,140
|
Re: Finally starting my Longhorn 4x4 conversion
Quote:
__________________
Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project Tired of spark plugs? Check this out. Last edited by Dieselwrencher; 02-16-2011 at 06:35 PM. |
|
![]() |
![]() |
![]() |
Bookmarks |
|
|