![]() |
|
![]() |
#1 | |
Senior Member
![]() Join Date: Aug 2018
Location: Western Colorado
Posts: 1,165
|
Re: 1968 GMC - Ol' Blue
Quote:
A tip: run your wires the way you want them to run and have them sticking out through the buckets and then install the connectors. If you don't, you'll find out that the connector won't fit between the bucket and the core support.
__________________
1964 Chevy C10 - Gen IV 5.3 Restomod http://67-72chevytrucks.com/vboard/s...d.php?t=768632 1968 GMC C15 - Gen III 6.0 Restomod http://67-72chevytrucks.com/vboard/s...d.php?t=772047 1969 Chevy C10 - Restoration http://67-72chevytrucks.com/vboard/s...d.php?t=809184 1978 Chevy Scottsdale K20 1993 Chevy C1500 - 5.3/T56 swapped 2008 Silverado Duramax |
|
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Sep 2013
Location: Brighton Colorado
Posts: 20
|
Re: 1968 GMC - Ol' Blue
Thanks, My build is real similar to your. A little darker blue LQ4 4L80E, Coil springs, the same Tanks tank (hopefully I will not have any leaks my bed is on). I am in the process of wiring, I may be bugging you some more. thanks for your help.
|
![]() |
![]() |
![]() |
#3 |
chevy truck fan
Join Date: Mar 2005
Location: Gilbert, arizona 85298
Posts: 1,984
|
Re: 1968 GMC - Ol' Blue
md,
very nice job on the fans and the CFM verification. I purchased my radi/fan setup from summit. supposedly the fans indicate that their CFM is equal to what the factory fans did for my engine. I will also wire mine up to do the same as you indicated - first fan on full until temp/ac comp. kicks on and then kick the 2nd fan on. thanks for the build updates!! ![]() |
![]() |
![]() |
![]() |
#4 | |
Senior Member
![]() Join Date: Aug 2018
Location: Western Colorado
Posts: 1,165
|
Re: 1968 GMC - Ol' Blue
Quote:
__________________
1964 Chevy C10 - Gen IV 5.3 Restomod http://67-72chevytrucks.com/vboard/s...d.php?t=768632 1968 GMC C15 - Gen III 6.0 Restomod http://67-72chevytrucks.com/vboard/s...d.php?t=772047 1969 Chevy C10 - Restoration http://67-72chevytrucks.com/vboard/s...d.php?t=809184 1978 Chevy Scottsdale K20 1993 Chevy C1500 - 5.3/T56 swapped 2008 Silverado Duramax |
|
![]() |
![]() |
![]() |
#5 |
Senior Member
![]() Join Date: Aug 2004
Location: Centennial, CO
Posts: 2,935
|
Re: 1968 GMC - Ol' Blue
Nice progress, you'll be ready for summer.
How do you like that fuse/relay box? It looks like the same one I bought off Amazon.
__________________
ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ |
![]() |
![]() |
![]() |
#6 | |
Senior Member
![]() Join Date: Aug 2018
Location: Western Colorado
Posts: 1,165
|
Re: 1968 GMC - Ol' Blue
Quote:
The fuse box is good, I'm happy with it. I've used 10ga wire on the connectors; it's not easy, but it can be done. I solder all the connections too. Just make sure you get the seals on the right way (the relay gaskets can be put in upside down). You can slide the gasket over the wires and then make up your connectors, but it's also possible to stretch the gasket around the connectors (easiest if you have another person to stretch it while the other pushes the connector through). I couldn't figure out how to pull the connectors out of the fuse slots without breaking a little plastic tab off, so that's why you see a couple slots between fuses. Once that plastic tab in the housing is broken off, the connector won't stay in. I looked at the Bussman center as well since it's so cool and commercial-looking, but you end up having to buy like 50 or 100 minimum of the connectors and gaskets and there are different sizes for different size wires so you end up spending like $150 on the center, connectors, and gaskets and only using a few so I decided to go with this one since it comes with all those for a lot cheaper.
__________________
1964 Chevy C10 - Gen IV 5.3 Restomod http://67-72chevytrucks.com/vboard/s...d.php?t=768632 1968 GMC C15 - Gen III 6.0 Restomod http://67-72chevytrucks.com/vboard/s...d.php?t=772047 1969 Chevy C10 - Restoration http://67-72chevytrucks.com/vboard/s...d.php?t=809184 1978 Chevy Scottsdale K20 1993 Chevy C1500 - 5.3/T56 swapped 2008 Silverado Duramax |
|
![]() |
![]() |
![]() |
#7 |
Senior Member
![]() Join Date: Aug 2004
Location: Centennial, CO
Posts: 2,935
|
Re: 1968 GMC - Ol' Blue
I thought the same about that Bussman. If the terminals weren’t an issue it would be a solid choice.
Thanks for the heads up. Hopefully I’ll be doing some wiring this summer.
__________________
ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ |
![]() |
![]() |
![]() |
#8 |
Senior Member
![]() Join Date: Aug 2018
Location: Western Colorado
Posts: 1,165
|
Re: 1968 GMC - Ol' Blue
I'm starting to see the light at the end of the tunnel on the bed. I sanded the bedsides, the tubs, and the floor with 180 and then sprayed 2 coats of epoxy.
__________________
1964 Chevy C10 - Gen IV 5.3 Restomod http://67-72chevytrucks.com/vboard/s...d.php?t=768632 1968 GMC C15 - Gen III 6.0 Restomod http://67-72chevytrucks.com/vboard/s...d.php?t=772047 1969 Chevy C10 - Restoration http://67-72chevytrucks.com/vboard/s...d.php?t=809184 1978 Chevy Scottsdale K20 1993 Chevy C1500 - 5.3/T56 swapped 2008 Silverado Duramax |
![]() |
![]() |
![]() |
#9 |
Senior Member
![]() Join Date: Aug 2018
Location: Western Colorado
Posts: 1,165
|
Re: 1968 GMC - Ol' Blue
The next day, I sprayed two coats of Raptor Liner on the floor. It's hard to get it to look even with such a small pattern on the Raptor gun, but by the end of the day it had flashed off and you could hardly see the lines. The tailgate and front panel are nice and smooth from the factory so I won't need to do anything prior to paint on them.
1st coat: 2nd coat (right after spraying): After drying about 6 hours:
__________________
1964 Chevy C10 - Gen IV 5.3 Restomod http://67-72chevytrucks.com/vboard/s...d.php?t=768632 1968 GMC C15 - Gen III 6.0 Restomod http://67-72chevytrucks.com/vboard/s...d.php?t=772047 1969 Chevy C10 - Restoration http://67-72chevytrucks.com/vboard/s...d.php?t=809184 1978 Chevy Scottsdale K20 1993 Chevy C1500 - 5.3/T56 swapped 2008 Silverado Duramax |
![]() |
![]() |
![]() |
#10 |
Registered User
Join Date: Apr 2014
Location: Azle,Texas
Posts: 2,248
|
Re: 1968 GMC - Ol' Blue
The raptor liner really looks good, and I’d bet after it gets just a little bit of use you won’t be able to see any spray lines. Is raptor liner different that a standard bed liner or just another brand?
Did you add any filler to the bedside that arrived dented? It looks too straight to only have popped out the dent, or are you just very good with a hammer and dolly?
__________________
Brian 1972 C10, "Loyd", LWB to SWB, 5.3, L83/6L80e, 4:11 Tru Trac, Air Ride, VA, DD, 20" Coys, 4 wheel disc, A quick LS swap turned into a 6 year frame off resto-mod. |
![]() |
![]() |
![]() |
#11 | |
Senior Member
![]() Join Date: Aug 2018
Location: Western Colorado
Posts: 1,165
|
Re: 1968 GMC - Ol' Blue
Quote:
I did apply some filler to the damaged bedside, along with the shaved stake pockets and the inner bedrail edge to cover up spot welds. The picture I took is of the good bedside. I'm far from very good with a hammer and dolly.
__________________
1964 Chevy C10 - Gen IV 5.3 Restomod http://67-72chevytrucks.com/vboard/s...d.php?t=768632 1968 GMC C15 - Gen III 6.0 Restomod http://67-72chevytrucks.com/vboard/s...d.php?t=772047 1969 Chevy C10 - Restoration http://67-72chevytrucks.com/vboard/s...d.php?t=809184 1978 Chevy Scottsdale K20 1993 Chevy C1500 - 5.3/T56 swapped 2008 Silverado Duramax |
|
![]() |
![]() |
![]() |
#12 |
Registered User
Join Date: Dec 2013
Location: Farmington NM
Posts: 655
|
Re: 1968 GMC - Ol' Blue
Are you planning to top coat the raptor lining with body color or leave it black? Looks good, and you're way ahead of us.
__________________
Former Build (68 c10 swb): http://67-72chevytrucks.com/vboard/s...d.php?t=724379 (SOLD) Current Built (68 c10 swb): http://67-72chevytrucks.com/vboard/s...d.php?t=787712 |
![]() |
![]() |
![]() |
#13 |
Senior Member
![]() Join Date: Aug 2018
Location: Western Colorado
Posts: 1,165
|
Re: 1968 GMC - Ol' Blue
I'm just leaving it black. I thought about tinting it, but wanted a little contrast.
__________________
1964 Chevy C10 - Gen IV 5.3 Restomod http://67-72chevytrucks.com/vboard/s...d.php?t=768632 1968 GMC C15 - Gen III 6.0 Restomod http://67-72chevytrucks.com/vboard/s...d.php?t=772047 1969 Chevy C10 - Restoration http://67-72chevytrucks.com/vboard/s...d.php?t=809184 1978 Chevy Scottsdale K20 1993 Chevy C1500 - 5.3/T56 swapped 2008 Silverado Duramax |
![]() |
![]() |
![]() |
#14 |
Registered User
Join Date: Dec 2013
Location: Farmington NM
Posts: 655
|
Re: 1968 GMC - Ol' Blue
I'll admit, I am not up to speed on this stuff but would be concerned about it fading. I am sure it will look nice either way. Again, good job on the truck.
__________________
Former Build (68 c10 swb): http://67-72chevytrucks.com/vboard/s...d.php?t=724379 (SOLD) Current Built (68 c10 swb): http://67-72chevytrucks.com/vboard/s...d.php?t=787712 |
![]() |
![]() |
![]() |
#15 |
Almost Satisfied
![]() Join Date: Mar 2002
Location: Springfield, MO
Posts: 2,932
|
Re: 1968 GMC - Ol' Blue
I'm having this shot on the inside of my rear fenders and front inner fenders to keep the rock dings and stars down. Looks like good stuff.
__________________
1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021. "I can't complain, but sometimes I still do. Life's been good to me so far." |
![]() |
![]() |
![]() |
#16 |
Registered User
Join Date: Jun 2018
Location: Columbus
Posts: 95
|
Re: 1968 GMC - Ol' Blue
I had the same issue with my rear view mirror from GMCPauls but really cranked down on the screw and it seemed to tighten up and doesn’t fall down anymore.
|
![]() |
![]() |
![]() |
#17 |
Almost Satisfied
![]() Join Date: Mar 2002
Location: Springfield, MO
Posts: 2,932
|
Re: 1968 GMC - Ol' Blue
Great work as always! You are getting yours done fast.
__________________
1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021. "I can't complain, but sometimes I still do. Life's been good to me so far." |
![]() |
![]() |
![]() |
#18 |
Senior Member
![]() Join Date: Aug 2018
Location: Western Colorado
Posts: 1,165
|
Re: 1968 GMC - Ol' Blue
I'm very self-motivated. I want it done so I can drive it!
__________________
1964 Chevy C10 - Gen IV 5.3 Restomod http://67-72chevytrucks.com/vboard/s...d.php?t=768632 1968 GMC C15 - Gen III 6.0 Restomod http://67-72chevytrucks.com/vboard/s...d.php?t=772047 1969 Chevy C10 - Restoration http://67-72chevytrucks.com/vboard/s...d.php?t=809184 1978 Chevy Scottsdale K20 1993 Chevy C1500 - 5.3/T56 swapped 2008 Silverado Duramax |
![]() |
![]() |
![]() |
#19 |
Registered User
Join Date: Apr 2014
Location: Azle,Texas
Posts: 2,248
|
Re: 1968 GMC - Ol' Blue
You may have mentioned this earlier and I didn’t notice, but I gotta ask the question... how is it that you have so much time in a legit spray booth?
__________________
Brian 1972 C10, "Loyd", LWB to SWB, 5.3, L83/6L80e, 4:11 Tru Trac, Air Ride, VA, DD, 20" Coys, 4 wheel disc, A quick LS swap turned into a 6 year frame off resto-mod. |
![]() |
![]() |
![]() |
#20 |
Senior Member
![]() Join Date: Aug 2018
Location: Western Colorado
Posts: 1,165
|
Re: 1968 GMC - Ol' Blue
Well I appreciate the compliment on the spray booth! Haha but it is by no means legit. It's just a wood framed room with lots of light, intake filters, and exhaust to the exterior. But it is nice to have a room dedicated to spraying. I probably spent about $1500 on it. But we had lights, ceiling joists, and an old swamp cooler from a building we dismantled. So I bought the 2x material, OSB, paint, and furnace filters and it works pretty well. I need more CFM though, it gets cloudy quick if you're spraying much clear.
__________________
1964 Chevy C10 - Gen IV 5.3 Restomod http://67-72chevytrucks.com/vboard/s...d.php?t=768632 1968 GMC C15 - Gen III 6.0 Restomod http://67-72chevytrucks.com/vboard/s...d.php?t=772047 1969 Chevy C10 - Restoration http://67-72chevytrucks.com/vboard/s...d.php?t=809184 1978 Chevy Scottsdale K20 1993 Chevy C1500 - 5.3/T56 swapped 2008 Silverado Duramax |
![]() |
![]() |
![]() |
#21 | |
Registered User
Join Date: Apr 2014
Location: Azle,Texas
Posts: 2,248
|
Re: 1968 GMC - Ol' Blue
Quote:
__________________
Brian 1972 C10, "Loyd", LWB to SWB, 5.3, L83/6L80e, 4:11 Tru Trac, Air Ride, VA, DD, 20" Coys, 4 wheel disc, A quick LS swap turned into a 6 year frame off resto-mod. |
|
![]() |
![]() |
![]() |
#22 |
Registered User
Join Date: Jun 2018
Location: Texas
Posts: 1,353
|
Re: 1968 GMC - Ol' Blue
Nice work Potter! Been a while since I checked in. I have same extra LMC mirror I'm not using if you want it.
When you shaved your bed stakes did you also remove the boxes underneath as well? .
__________________
TA_C10 Stage 1 build - http://67-72chevytrucks.com/vboard/s....php?p=8333444 "It's only money". ![]() |
![]() |
![]() |
![]() |
#23 | |
Senior Member
![]() Join Date: Aug 2018
Location: Western Colorado
Posts: 1,165
|
Re: 1968 GMC - Ol' Blue
Quote:
And no, I didn't go that far. Just filled the hole in the bedrail.
__________________
1964 Chevy C10 - Gen IV 5.3 Restomod http://67-72chevytrucks.com/vboard/s...d.php?t=768632 1968 GMC C15 - Gen III 6.0 Restomod http://67-72chevytrucks.com/vboard/s...d.php?t=772047 1969 Chevy C10 - Restoration http://67-72chevytrucks.com/vboard/s...d.php?t=809184 1978 Chevy Scottsdale K20 1993 Chevy C1500 - 5.3/T56 swapped 2008 Silverado Duramax |
|
![]() |
![]() |
![]() |
#24 |
Almost Satisfied
![]() Join Date: Mar 2002
Location: Springfield, MO
Posts: 2,932
|
Re: 1968 GMC - Ol' Blue
Looks like you had a more productive weekend than I did. Can't wait to see the bed on it.
__________________
1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021. "I can't complain, but sometimes I still do. Life's been good to me so far." |
![]() |
![]() |
![]() |
#25 |
Senior Member
![]() Join Date: Aug 2018
Location: Western Colorado
Posts: 1,165
|
Re: 1968 GMC - Ol' Blue
This thing is really coming down the home stretch. We had such a fun day yesterday putting the bed together, installing the lighting, and the bumper. Also got a few small interior parts done. This has been a lot of fun, but I'm looking forward to having it done so I can drive it and also work on a couple home projects before starting on the next vehicle.
At this point, it needs a hood, Vintage Air, alignment, and a few small items and it'll be done.
__________________
1964 Chevy C10 - Gen IV 5.3 Restomod http://67-72chevytrucks.com/vboard/s...d.php?t=768632 1968 GMC C15 - Gen III 6.0 Restomod http://67-72chevytrucks.com/vboard/s...d.php?t=772047 1969 Chevy C10 - Restoration http://67-72chevytrucks.com/vboard/s...d.php?t=809184 1978 Chevy Scottsdale K20 1993 Chevy C1500 - 5.3/T56 swapped 2008 Silverado Duramax |
![]() |
![]() |
![]() |
Bookmarks |
|
|