KS parting out 72 GMC LB BB - Page 10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

HeavyMetalChevy · 04-14-2012, 12:20 AM

is the core support in need of repairs??? And the engine I can pay for it up front... just need to know its not in your way. Thanks!

**Cash3481** · 04-14-2012, 12:31 AM

Not really in the way. So I can sit on it for a while.
Posted via Mobile Device

Pmarti69 · 04-14-2012, 07:39 AM

You still have the all seat belts and 4 core radiator hold downs. Price for shipping to 77345.

**Cash3481** · 04-14-2012, 08:10 AM

Quote:

Originally Posted by Pmarti69

You still have the all seat belts and 4 core radiator hold downs. Price for shipping to 77345.

Sorry, both sold and shipped. I have pretty much deleted everything from the list that was sold. Only stuff left is listed.
Mike
Posted via Mobile Device

**Cash3481** · 04-15-2012, 12:14 PM

Quote:

Originally Posted by HeavyMetalChevy

is the core support in need of repairs??? And the engine I can pay for it up front... just need to know its not in your way. Thanks!

Stil interested in the engine? I will get core support pics in a few. Do you want the gmc or chevy core support pics. I have the deflector for one as well if your going to be shipping/picking up some big stuff.
Mike
Posted via Mobile Device

HeavyMetalChevy · 04-15-2012, 12:24 PM

Ye I am still interested in the engine and would like pics of the chevy core support please sir. Just trying to work out logistics on engine. How close are you to Teeitup?

**Cash3481** · 04-15-2012, 12:46 PM

Maybe 2-2.5 hrs from here. I'll gout and get pics now and post em up here. Do you want just the gmc or the chevy one too. There is pics of the chevy one around post 185 or something like that.
Mike
Posted via Mobile Device

**Cash3481** · 04-15-2012, 01:14 PM

Heavymetal chevy:
\Here are some pics of the GMC core support. I ran my finger over the dirt on the D/S, the P/S has a rust through spot.
The pics turned out pretty good! Like most everything ewlse on this is really nice.
The Chevy pics are coming!
Mike

HeavyMetalChevy · 04-15-2012, 01:16 PM

Thanks! I seen the Chevy. Looking for one that I can repair and blast as well. Also I will take the black seatbelts pending any cracks on retracts covers?

**Cash3481** · 04-15-2012, 01:19 PM

Heavy Metal Chevy:
Here is the pics of the Chevy one. Its been blasted and painted. There is a few light runs where they wont show but its as solid as any youll find and there is only slight pitting! Also if you wanted to convert a chevy to GMC I have these I cut off of a really bad one. Just offering choices.
Mike

HeavyMetalChevy · 04-23-2012, 11:11 PM

Quote:

Originally Posted by Cash3481

Heavy Metal Chevy:
Here is the pics of the Chevy one. Its been blasted and painted. There is a few light runs where they wont show but its as solid as any youll find and there is only slight pitting! Also if you wanted to convert a chevy to GMC I have these I cut off of a really bad one. Just offering choices.
Mike

ok I am back on track. I will take the GMC buckets and rad. support. Still trying to work on motor money. Just got to clear some more parts and should be able to rock and roll. Plus Randy keeps taking all my money!

**Cash3481** · 04-23-2012, 11:21 PM

I agree! I should claim Randy on my taxes... I have to go get my rear end from him this weekend or next along with OD29s front end possibly.
I'll make you a great deal on the 3/4 Ton suspension, core support, and buckets. Look back over the last few pages and see if there is anything else you may want to add. I'm wholesaling this to get room for some more.lol
Mike
Posted via Mobile Device

HeavyMetalChevy · 04-23-2012, 11:41 PM

Quote:

Originally Posted by Cash3481

I agree! I should claim Randy on my taxes... I have to go get my rear end from him this weekend or next along with OD29s front end possibly.
I'll make you a great deal on the 3/4 Ton suspension, core support, and buckets. Look back over the last few pages and see if there is anything else you may want to add. I'm wholesaling this to get room for some more.lol
Mike
Posted via Mobile Device

I here ya. I already have 4 front ends sitting around a 5 rear axles. My project 70 C-20 and 71 swb. 3 cabs, a 99 3500 chevy express van, 5 engines and trans. lol.. .We're all nuts!

Bromax · 04-24-2012, 09:27 AM

I am interested in the front disc brakes and suspension. I do not have a way to get to your location to get it, but if you don't of it keep me in mind in the event something can be figured out. I have a 69 i want to convert to front discs and that would be the easiest swap. Thanks

**Cash3481** · 04-24-2012, 10:42 AM

Quote:

Originally Posted by Bromax

I am interested in the front disc brakes and suspension. I do not have a way to get to your location to get it, but if you don't of it keep me in mind in the event something can be figured out. I have a 69 i want to convert to front discs and that would be the easiest swap. Thanks

I can tear it apart and figure out shipping on some of the parts, if your serious about the disc stuff only. If not, Im sure Heavy Metal could assist me in the shipping dept if you want the entire 3/4 ton front end (not to mention the time savings of tearing yours apart). Ill make you a good deal to assist in the shipping cost if your serious. Hate to take thing to scrap, especially disc setups... 8 lug or not. LMK
Mike

Bromax · 04-24-2012, 10:56 AM

Cash3481...I would like to get the spindles, and disc brake calipers, and splash guards...would i be able to buy 6 lug rotors to fit the spindles you have and would the same calipers work on a 6 lug rotor as the would the 8?....If so what would the price be to get those parts from you..thanks.

HeavyMetalChevy · 04-24-2012, 11:29 AM

Quote:

Originally Posted by Bromax

I am interested in the front disc brakes and suspension. I do not have a way to get to your location to get it, but if you don't of it keep me in mind in the event something can be figured out. I have a 69 i want to convert to front discs and that would be the easiest swap. Thanks

I can get it too you at an affordable rate. I have helped many a member.

**Cash3481** · 04-24-2012, 11:58 AM

Quote:

Originally Posted by Bromax

Cash3481...I would like to get the spindles, and disc brake calipers, and splash guards...would i be able to buy 6 lug rotors to fit the spindles you have and would the same calipers work on a 6 lug rotor as the would the 8?....If so what would the price be to get those parts from you..thanks.

I would take $50 plus shipping on this stuff mentioned. I can tear it all down for you and get a quote for those parts after I weigh it all.
As far as fitment... we will have to ask some smarter people than me from the board.
I took this truck apart the week after I posted this thread and the front end was removed the last day when I took it to the scrap yard, just so you know the removal timeframe.
If you need additional parts I would look at Teeitup's threads and some of the others that part trucks religously as they have plenty of parts to recycle for use.
Let me know

Bromax · 04-24-2012, 01:22 PM

Just let me now what the cost is and I will see what can be done. Thanks for responding.

Bromax · 04-24-2012, 01:25 PM

price sounds fair to me..and appreciate the heads up on other memebers and parts.

Bromax · 04-24-2012, 01:33 PM

Heavymetal...do you happen to know if the 8 lug 3/4 ton front spindles will fit on the 69 front end and would i be able to also use the calipers for the 8 lug, and just buy new 6 lug rotors to work with calipers and spindles? Speaking in reference to cash 3481 parts...Thanks

**Cash3481** · 05-01-2012, 05:13 PM

Quote:

Originally Posted by Bromax

Cash3481...I would like to get the spindles, and disc brake calipers, and splash guards...would i be able to buy 6 lug rotors to fit the spindles you have and would the same calipers work on a 6 lug rotor as the would the 8?....If so what would the price be to get those parts from you..thanks.

I see you also asked this question earlier last week in an additional thread. Did you get an answer yet? I dont want to waste the time removing those parts if your not sure they can be used. I stand ready to get you any parts you need shipped off the 3/4 ton suspension when your ready. LMKv when you get a chance.
Mike

Bromax · 05-02-2012, 02:39 PM

Cash.....i appreciate the response....and I think ur rite..i am not sure if the parts will fit, and it would be btter if i went with a completely new disc system for the front. I hope to become a full member soon. I will be looking to get some parts and get rid off some I am not using from the 69. Thanks

04-14-2012, 12:20 AM	#226
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: parting out 72 GMC LB BB is the core support in need of repairs??? And the engine I can pay for it up front... just need to know its not in your way. Thanks! __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

04-14-2012, 12:31 AM	#227
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: parting out 72 GMC LB BB Not really in the way. So I can sit on it for a while. Posted via Mobile Device

04-14-2012, 07:39 AM	#228
Pmarti69 Registered User Join Date: Feb 2012 Location: North of Houston, Tx Posts: 346	Re: parting out 72 GMC LB BB You still have the all seat belts and 4 core radiator hold downs. Price for shipping to 77345.

04-15-2012, 12:24 PM	#231
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: parting out 72 GMC LB BB Ye I am still interested in the engine and would like pics of the chevy core support please sir. Just trying to work out logistics on engine. How close are you to Teeitup? __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

04-15-2012, 12:46 PM	#232
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: parting out 72 GMC LB BB Maybe 2-2.5 hrs from here. I'll gout and get pics now and post em up here. Do you want just the gmc or the chevy one too. There is pics of the chevy one around post 185 or something like that. Mike Posted via Mobile Device

04-15-2012, 01:14 PM	#233
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: parting out 72 GMC LB BB Heavymetal chevy: \Here are some pics of the GMC core support. I ran my finger over the dirt on the D/S, the P/S has a rust through spot. The pics turned out pretty good! Like most everything ewlse on this is really nice. The Chevy pics are coming! Mike Attached Images

04-15-2012, 01:16 PM	#234
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: parting out 72 GMC LB BB Thanks! I seen the Chevy. Looking for one that I can repair and blast as well. Also I will take the black seatbelts pending any cracks on retracts covers? __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

04-15-2012, 01:19 PM	#235
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: parting out 72 GMC LB BB Heavy Metal Chevy: Here is the pics of the Chevy one. Its been blasted and painted. There is a few light runs where they wont show but its as solid as any youll find and there is only slight pitting! Also if you wanted to convert a chevy to GMC I have these I cut off of a really bad one. Just offering choices. Mike Attached Images

04-23-2012, 11:21 PM	#237
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: parting out 72 GMC LB BB I agree! I should claim Randy on my taxes... I have to go get my rear end from him this weekend or next along with OD29s front end possibly. I'll make you a great deal on the 3/4 Ton suspension, core support, and buckets. Look back over the last few pages and see if there is anything else you may want to add. I'm wholesaling this to get room for some more.lol Mike Posted via Mobile Device

04-24-2012, 09:27 AM	#239
Bromax Registered User Join Date: Apr 2012 Location: Phenix City Alabama Posts: 20	Re: parting out 72 GMC LB BB I am interested in the front disc brakes and suspension. I do not have a way to get to your location to get it, but if you don't of it keep me in mind in the event something can be figured out. I have a 69 i want to convert to front discs and that would be the easiest swap. Thanks

04-24-2012, 10:56 AM	#241
Bromax Registered User Join Date: Apr 2012 Location: Phenix City Alabama Posts: 20	Re: parting out 72 GMC LB BB Cash3481...I would like to get the spindles, and disc brake calipers, and splash guards...would i be able to buy 6 lug rotors to fit the spindles you have and would the same calipers work on a 6 lug rotor as the would the 8?....If so what would the price be to get those parts from you..thanks.

04-24-2012, 01:22 PM	#244
Bromax Registered User Join Date: Apr 2012 Location: Phenix City Alabama Posts: 20	Re: parting out 72 GMC LB BB Just let me now what the cost is and I will see what can be done. Thanks for responding.

04-24-2012, 01:25 PM	#245
Bromax Registered User Join Date: Apr 2012 Location: Phenix City Alabama Posts: 20	Re: parting out 72 GMC LB BB price sounds fair to me..and appreciate the heads up on other memebers and parts.

04-24-2012, 01:33 PM	#246
Bromax Registered User Join Date: Apr 2012 Location: Phenix City Alabama Posts: 20	Re: parting out 72 GMC LB BB Heavymetal...do you happen to know if the 8 lug 3/4 ton front spindles will fit on the 69 front end and would i be able to also use the calipers for the 8 lug, and just buy new 6 lug rotors to work with calipers and spindles? Speaking in reference to cash 3481 parts...Thanks

05-02-2012, 02:39 PM	#248
Bromax Registered User Join Date: Apr 2012 Location: Phenix City Alabama Posts: 20	Re: parting out 72 GMC LB BB Cash.....i appreciate the response....and I think ur rite..i am not sure if the parts will fit, and it would be btter if i went with a completely new disc system for the front. I hope to become a full member soon. I will be looking to get some parts and get rid off some I am not using from the 69. Thanks



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.