building my first lowered truck - Page 10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**67cheby** · 02-06-2012, 11:21 AM

Wow !!

laid_out_70 · 02-09-2012, 02:10 AM

Quote:

Originally Posted by Cameron 1137

outstanding!

Quote:

Originally Posted by 67cheby

Wow !!

thanks guys.

latest decision. should i door the truck? lol

**67cheby** · 02-09-2012, 10:53 AM

i say no...too many other complications associated with dooring it....several more inches of clearance everywhere..just my 2cents

Cameron 1137 · 02-09-2012, 02:46 PM

whoah! new term, what is dooring??

98layinframe · 02-09-2012, 03:14 PM

Cut the rockers off flat and lay the doors on the ground... so bodydropping it further.
Posted via Mobile Device

jbclassix · 02-09-2012, 10:39 PM

I wouldn't door it, but invert the pinch-weld on the rocker and lap weld it to the inner rocker along with plug welds.

laid_out_70 · 02-10-2012, 12:39 AM

well its already overbodied, going to have an 1" of the rocker left. after talking with some smarties and visualizing ive decided not to. dont need any more delays. i want to drive this long turd

laid_out_70 · 02-12-2012, 11:55 PM

did some work today. first i pulled off the bed mounts, and finished filling and sanding the frame up to the wishbone crossmember.

also got the drivers side bag mount welded in

bat wings!

then gusseted the link tabs on the axle

jbclassix · 02-13-2012, 12:56 AM

I love this build even more now that I see that Eaton under there!

laid_out_70 · 02-13-2012, 10:53 AM

thats the rear end right? it a stock c20 rear end as far as i know.

laid_out_70 · 02-15-2012, 01:30 AM

did a bit today. first i cut top and bottom of the C channel of the frame to make them square. then i trimmed the rails so i had a consistant slope from the notch to where the frame rails will be Z'ed. then i boxed in the rails with 1/8" plate, stopped a few inches before the Z. still need to weld up the bottom, another day.

and a funny!

laid_out_70 · 02-16-2012, 10:19 PM

let the rust begin, lol

got the truck in, shaved up the holes past the notch and figured out my tank and compressor placement

**67cheby** · 02-16-2012, 11:49 PM

Looking good man
Posted via Mobile Device

jbclassix · 02-16-2012, 11:59 PM

Those wheels are sick!

laid_out_70 · 02-17-2012, 04:37 PM

Quote:

Originally Posted by 67cheby

Looking good man
Posted via Mobile Device

thanks mr slosh

Quote:

Originally Posted by jbclassix

Those wheels are sick!

blacked out 6"s are where its at son!

**67cheby** · 02-17-2012, 04:42 PM

LOL, i like the MR

laid_out_70 · 02-21-2012, 03:57 AM

thought you would, boss. hahaha

started on tank and compressor mounts today.

Krooked Kustoms · 04-14-2012, 06:22 AM

Mate looking good!! Im stuck for words! Looks killer. How is progress?

**67cheby** · 04-14-2012, 11:21 AM

2-21 since progress....come on we know you are holding out on us !!

Twin Turbo Skylark · 06-25-2016, 03:01 PM

WOW!! I know this is an old thread but is the truck still being worked on???? Super nice work!

02-06-2012, 11:21 AM	#226
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: building my first lowered truck Wow !! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

02-09-2012, 10:53 AM	#228
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: building my first lowered truck i say no...too many other complications associated with dooring it....several more inches of clearance everywhere..just my 2cents __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

02-09-2012, 02:46 PM	#229
Cameron 1137 Registered User Join Date: Feb 2011 Location: Pittsfield, Ma Posts: 497	Re: building my first lowered truck whoah! new term, what is dooring?? __________________ Cam 1972 Chevy C/10 "Custom Cruiser Project" Build Thread 1961 Olds Super 88 (Daily) 1966 Chevy Corvair 500, "Marigold" SOLD 2005 Subaru Outback Wagon DEAD 2008 Pontiac G8, New Winter/Daily

02-09-2012, 03:14 PM	#230
98layinframe Registered User Join Date: Oct 2011 Location: Pittsburgh Pa Posts: 267	Re: building my first lowered truck Cut the rockers off flat and lay the doors on the ground... so bodydropping it further. Posted via Mobile Device

02-09-2012, 10:39 PM	#231
jbclassix Junk Yartist Join Date: Jul 2009 Location: Greeley, CO Posts: 2,203	Re: building my first lowered truck I wouldn't door it, but invert the pinch-weld on the rocker and lap weld it to the inner rocker along with plug welds. __________________ -Jeremy YOU ONLY FAIL IF YOU STOP TRYING 70 Crew Cab Build Link 70 GMC Suburban 4X4 build thread 95 Yukon Daily Driver Rebuilding an NP205

02-10-2012, 12:39 AM	#232
laid_out_70 Registered User Join Date: Jul 2010 Location: yv, ca Posts: 280	Re: building my first lowered truck well its already overbodied, going to have an 1" of the rocker left. after talking with some smarties and visualizing ive decided not to. dont need any more delays. i want to drive this long turd __________________ My Build Thread. 70 C-20, SFBD, angled Z, 3 linked. impressive for a noob? http://67-72chevytrucks.com/vboard/s...d.php?t=438132

02-12-2012, 11:55 PM	#233
laid_out_70 Registered User Join Date: Jul 2010 Location: yv, ca Posts: 280	Re: building my first lowered truck did some work today. first i pulled off the bed mounts, and finished filling and sanding the frame up to the wishbone crossmember. also got the drivers side bag mount welded in bat wings! then gusseted the link tabs on the axle __________________ My Build Thread. 70 C-20, SFBD, angled Z, 3 linked. impressive for a noob? http://67-72chevytrucks.com/vboard/s...d.php?t=438132

02-13-2012, 12:56 AM	#234
jbclassix Junk Yartist Join Date: Jul 2009 Location: Greeley, CO Posts: 2,203	Re: building my first lowered truck I love this build even more now that I see that Eaton under there! __________________ -Jeremy YOU ONLY FAIL IF YOU STOP TRYING 70 Crew Cab Build Link 70 GMC Suburban 4X4 build thread 95 Yukon Daily Driver Rebuilding an NP205

02-13-2012, 10:53 AM	#235
laid_out_70 Registered User Join Date: Jul 2010 Location: yv, ca Posts: 280	Re: building my first lowered truck thats the rear end right? it a stock c20 rear end as far as i know. __________________ My Build Thread. 70 C-20, SFBD, angled Z, 3 linked. impressive for a noob? http://67-72chevytrucks.com/vboard/s...d.php?t=438132

02-15-2012, 01:30 AM	#236
laid_out_70 Registered User Join Date: Jul 2010 Location: yv, ca Posts: 280	Re: building my first lowered truck did a bit today. first i cut top and bottom of the C channel of the frame to make them square. then i trimmed the rails so i had a consistant slope from the notch to where the frame rails will be Z'ed. then i boxed in the rails with 1/8" plate, stopped a few inches before the Z. still need to weld up the bottom, another day. and a funny! __________________ My Build Thread. 70 C-20, SFBD, angled Z, 3 linked. impressive for a noob? http://67-72chevytrucks.com/vboard/s...d.php?t=438132

02-16-2012, 10:19 PM	#237
laid_out_70 Registered User Join Date: Jul 2010 Location: yv, ca Posts: 280	Re: building my first lowered truck let the rust begin, lol got the truck in, shaved up the holes past the notch and figured out my tank and compressor placement __________________ My Build Thread. 70 C-20, SFBD, angled Z, 3 linked. impressive for a noob? http://67-72chevytrucks.com/vboard/s...d.php?t=438132

02-16-2012, 11:49 PM	#238
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: building my first lowered truck Looking good man Posted via Mobile Device __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

02-16-2012, 11:59 PM	#239
jbclassix Junk Yartist Join Date: Jul 2009 Location: Greeley, CO Posts: 2,203	Re: building my first lowered truck Those wheels are sick! __________________ -Jeremy YOU ONLY FAIL IF YOU STOP TRYING 70 Crew Cab Build Link 70 GMC Suburban 4X4 build thread 95 Yukon Daily Driver Rebuilding an NP205

02-17-2012, 04:42 PM	#241
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: building my first lowered truck LOL, i like the MR __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

02-21-2012, 03:57 AM	#242
laid_out_70 Registered User Join Date: Jul 2010 Location: yv, ca Posts: 280	Re: building my first lowered truck thought you would, boss. hahaha started on tank and compressor mounts today. __________________ My Build Thread. 70 C-20, SFBD, angled Z, 3 linked. impressive for a noob? http://67-72chevytrucks.com/vboard/s...d.php?t=438132



Register or Log In To remove these advertisements.

04-14-2012, 06:22 AM	#243
Krooked Kustoms Registered User Join Date: Feb 2011 Location: Langwarrin South, Victoria, Australia Posts: 121	Re: building my first lowered truck Mate looking good!! Im stuck for words! Looks killer. How is progress?

04-14-2012, 11:21 AM	#244
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: building my first lowered truck 2-21 since progress....come on we know you are holding out on us !! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

06-25-2016, 03:01 PM	#245
Twin Turbo Skylark Registered User Join Date: Nov 2015 Location: fort saskatchewan Posts: 73	Re: building my first lowered truck WOW!! I know this is an old thread but is the truck still being worked on???? Super nice work!

Register or Log In To remove these advertisements.