Jason's 70 Big Block SWB Project

[jeh]

Yes, AAW complete harness.

[sduckworth13]

Jason, I believe you can go to their website and download the wiring harness schematic. There is a forum member Vettevet that I like to recommend for wiring issues, he is usually on the electrical forum.

[jeh]

Thanks Scott, I'll do some checking.

[sduckworth13]

http://67-72chevytrucks.com/vboard/s...d.php?t=579718

Here you go

[jeh]

I got my front runner from GM Performance and I'm not sure what years Chevy used the type of alternator I have, if that makes sense.

[Bennett68C10]

I'll be keeping an eye on this Jason as I plan on using an AAW wiring kit too and I'm sure I will run across the same problem.

[jeh]

Originally Posted by Bennett68C10

I'll be keeping an eye on this Jason as I plan on using an AAW wiring kit too and I'm sure I will run across the same problem.

Keith, I'll let you know when I get this figured out.:smoke

[jeh]

Originally Posted by sduckworth13

http://67-72chevytrucks.com/vboard/s...d.php?t=579718

Here you go

Thanks again Scott, I'm going to have to put you on "speed dial" LOL

[67ctener]

My bb8s fit great, both sides. Hope it helps

[jeh]

Originally Posted by 67ctener

My bb8s fit great, both sides. Hope it helps

Thanks, I've been wanting to see some pics. That's probably the route I'll go.

[68RAT540]

On my 1 wire alternator the engine has to be revved up to get it charging then it will charge all the time. I have my wire ran from alt straight to battery.

[mud.man.rj]

The alt should have at least an 8G wire to battery and a good size ground from engine to battery and cab to engine, if all that is cool just use a bit smaller pulley and it will turn it self on quicker at lower rpm, I use a lot of them and the pulley they usually come with is just a bit to big.

[jeh]

Originally Posted by 68RAT540

On my 1 wire alternator the engine has to be revved up to get it charging then it will charge all the time. I have my wire ran from alt straight to battery.

Originally Posted by mud.man.rj

The alt should have at least an 8G wire to battery and a good size ground from engine to battery and cab to engine, if all that is cool just use a bit smaller pulley and it will turn it self on quicker at lower rpm, I use a lot of them and the pulley they usually come with is just a bit to big.

Thanks guys, I will do some checking when I get back home. I do know that my wire from the alt runs to the starter. I don't know if that matters??

[mud.man.rj]

Fine run to the starter for power, as long as it is large enough and is away from engine heat...which it prob isn't, to much heat causes heat soak and is like dropping wire size.

[jeh]

Not much as far as the truck going on here. Just a little tinkering with some of the wiring that needs finished. It has been beautiful weather here so trying to catch up on outside things and yard work...

[Bennett68C10]

Same here Jason, not much work done on the truck. Trying to catch up on the yard work while the weather is nice. Damn yard work taking away from out truck time

[sduckworth13]

When's the big reveal Jason I'm looking forward to seeing your truck updates.

[mcbassin]

Originally Posted by sduckworth13

When's the big reveal Jason I'm looking forward to seeing your truck updates.

X2.
Looking forward to new pictures.

[jeh]

Originally Posted by sduckworth13

When's the big reveal Jason I'm looking forward to seeing your truck updates.

Originally Posted by mcbassin

X2.
Looking forward to new pictures.

Sorry guys, no current updates. It's a busy time of the year, especially with only every other weekend off work. I built my house 7 years ago and have never finished all my landscaping due to some pretty big trees, this spring I made up my mind to get it done!! Starting last Saturday my son and I cut about 12-14 trees and cleaned up as we went, so I have 5 or 6 left when I get home this Thursday. After that I have a dozer coming for a few days to level off some of my yard. So to make a long story short, the truck hasn't seen any "love" lately. On the other hand, I am thinking of ordering my wheels soon.

[sduckworth13]

I know the feeling I have many things I've put off last year trying to steam roll the truck to be able to drive it soon.

[mcbassin]

Can't wait to see the new wheels.

[Bennett68C10]

Can't wait to see what wheels you choose

[jeh]

I'm really liking the Coy C57 like on 7dos build thread.

[Bennett68C10]

Originally Posted by jeh

I'm really liking the Coy C57 like on 7dos build thread.

Those are very nice wheels, just be careful with there shady customer service if you decide to go with Coys.

[mcbassin]

Originally Posted by jeh

I'm really liking the Coy C57 like on 7dos build thread.

Those would be really nice on your truck. I've always like their wheels. I've never owned any though.