![]() |
![]() |
#1 |
On the road
![]() ![]() Join Date: Jan 2004
Location: NATCHITOCHES LOUISIANA
Posts: 816
|
The GSFMech Build
Well I've finally gotten a few pictures and am going to start posting them here as I have time. The first few are what I started with. I bought this truck in 01. It was all original but was pretty ratty. It had 2 paint jobs in its life, both real cheap. They didn't even take the trim off when they painted it. The cab corners, lower fenders, rockers all stuffed with Bondo. It did have a perfect bed though and a nice set of ralley wheels. It had the original 350 but the tranny took a dump shortly after I got it so I rebuilt it. I found rats nests in both cab corners, the windows would not roll up and down, the doors would hardly open or shut and it had a broken upper left door hinge on it. Oh yeah the right front fender was dented along with the grill and front bumper. I had a good bumper and bought a repop grill and stuck them on but left the fender as it was (it had a crease in it). The AC and heater didn't work, the fan would not even blow but it was all there. I fixed all the problems, cleaned it up got the AC working which took a new heater core, compressor and evaporator, expansion valve etc. and I converted to 134A and used one of those Old Air Products POA eliminator kits. I changed all the belts and hoses, rebuilt the carb, changed the valve cover gaskets and tuned it up. Stuck a new 4 core radiator in it and rebuilt all the brakes. It still had the original Packard plug wires on it which crumbled when I changed the plugs. That would explain the miss the previous owner had the whole time he owned it. This made it a decent little truck to drive. I drove it for awhile like that and then bought a 4/6 drop kit from ECE and a set of American torque thrust 2's and slammed it. I changed the drive shaft over to a one piece as well. It had the original single exhaust so I put a set of duals on it with turbo mufflers because after I slammed it, it would drag.
__________________
Mike Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos 72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works. My new build thread "Castro" https://67-72chevytrucks.com/vboard/...d.php?t=820934 My old build thread, the blue truck http://67-72chevytrucks.com/vboard/s...d.php?t=271489 www.louisianaclassictruckclub.com Last edited by GSFMECH; 04-13-2013 at 01:01 AM. |
![]() |
![]() |
Bookmarks |
|
|