Power Steering Adapter Plates - Page 10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Snowbound · 10-25-2012, 02:01 AM

I'll take a bracket kit for my '65. Please PM me with payment details.

Thanks,
Brian
Posted via Mobile Device

lowrollin70gmc · 10-25-2012, 09:46 PM

Also in need of one for a 68 4x4. The previous owner hacked some holes and I keep breaking steering box bolts! I even keep a ratchet and socket to check the bolts daily.

Please shoot me a PM and I'll get you some dinero and an address.

Thanks,
Andrew

**Captainfab** · 10-25-2012, 11:08 PM

PM's sent

Quote:

Originally Posted by Snowbound

I'll take a bracket kit for my '65. Please PM me with payment details.

Thanks,
Brian
Posted via Mobile Device

Quote:

Originally Posted by lowrollin70gmc

Also in need of one for a 68 4x4. The previous owner hacked some holes and I keep breaking steering box bolts! I even keep a ratchet and socket to check the bolts daily.

Please shoot me a PM and I'll get you some dinero and an address.

Thanks,
Andrew

gmcpickup66 · 10-26-2012, 08:34 AM

Captain what is the cost for PowerSteering adapter and PowerBrakes adapter? You can PM me with info and payment information. Thanks

**Captainfab** · 10-26-2012, 03:27 PM

PM sent

Quote:

Originally Posted by gmcpickup66

Captain what is the cost for PowerSteering adapter and PowerBrakes adapter? You can PM me with info and payment information. Thanks

lowrollin70gmc · 11-02-2012, 08:58 PM

Bracket received with great packing and awesome instructions.

Thanks,
Andrew

jonzcustomshop · 11-15-2012, 08:39 AM

got my second cap'n fab plate mounted, this one on a 64 4X4.such a beautiful piece, its a shame to paint it... my next one gets clear coated!

A tip or trick, I don't know if this has been mentioned: 1 new hole falls partially over an old one, you guys know how impossible it is to drill out 1/2 a hole...
so what I did was drill the other 3 holes, bolt the plate to the frame, and then use the plate as a guide to drill out the oblong hole.

Harley918 · 11-15-2012, 10:04 AM

Can you send me a pm an tell me how to buy your stuff.
Posted via Mobile Device

**Captainfab** · 11-15-2012, 11:19 PM

PM's sent

Quote:

Originally Posted by Ipaintgrt

I'm working on a 68 GMC C10 with my son and I'm putting suspension and steering from an 87 2wd suburban. I think I need one of your adapter kits for the steering box. Now I'm not sure what I need. I see in post #66 you say the 67 and 68 just need 1/4 inch spacers. Let me know what I need to do. Also the rag joint part/adapter. Thank you. Scott

Quote:

Originally Posted by Harley918

Can you send me a pm an tell me how to buy your stuff.
Posted via Mobile Device

**Captainfab** · 11-15-2012, 11:19 PM

Thanks for the compliment and the tip Jon

Quote:

Originally Posted by jonzcustomshop

got my second cap'n fab plate mounted, this one on a 64 4X4.such a beautiful piece, its a shame to paint it... my next one gets clear coated!

A tip or trick, I don't know if this has been mentioned: 1 new hole falls partially over an old one, you guys know how impossible it is to drill out 1/2 a hole...
so what I did was drill the other 3 holes, bolt the plate to the frame, and then use the plate as a guide to drill out the oblong hole.

travz500 · 11-22-2012, 01:49 AM

ok got a question I am putting the steering box out of my 87 4x4 blazer on my 65 4x4 frame getting rid of the original power steering it dont work well and the box leaks do I need a plate like yours to mount the newer box? I am assuming that the spacers you got on here make up for the dip in the newer frames? and does it line up with original holes in the frame or will I have to drill all new ones? thanks oh and how much for the plate? thank you
Travis

**Captainfab** · 11-22-2012, 02:42 AM

Yes, you will need an adapter plate to mount the '87 box onto the '65 frame. I do not know all the specifics on the 4x4 frames, as no one has given me any feedback on those. However on the 2wd's, the adapter plate comes with a template to locate the new holes you will need to drill. One hole is partially overlapping an existing hole as Jon mentioned above. For the guys installing these on a 4x4 frame I include another measurement and 3 pics, in addition to the standard installation instructions. The price is still the same as in post #1...........which is $55.00.

travz500 · 11-22-2012, 10:37 AM

well thank you sir when i get to that point I will be in touch with you for a adapter plate thanks again

CarlosRamirez · 12-19-2012, 07:58 PM

Hi captainfab i will be needing one of your power steering adapter plates, and a steering shaft adapter, can you pm me with info on cost and payment info. Thanks in advance!
Posted via Mobile Device

**Captainfab** · 12-20-2012, 12:22 AM

PM sent

Quote:

Originally Posted by CarlosRamirez

Hi captainfab i will be needing one of your power steering adapter plates, and a steering shaft adapter, can you pm me with info on cost and payment info. Thanks in advance!
Posted via Mobile Device

jlsanborn · 12-20-2012, 08:46 AM

Have you got a map with push-pins showing where you've shipped? You've sure touched a lot of trucks out there. Nice work!

**Captainfab** · 12-21-2012, 01:51 AM

No, I haven't done anything like that. Most of my sales have been all over the US and Canada. I believe I have just one sale in Australia. Thanks for the compliment

Quote:

Originally Posted by jlsanborn

Have you got a map with push-pins showing where you've shipped? You've sure touched a lot of trucks out there. Nice work!

Racefan31820 · 01-11-2013, 10:51 AM

Hi captainfab i will be needing one of your power steering adapter plates, and a steering shaft adapter,for my 65 c10 can you pm me with info on cost and payment info.

travz500 · 01-11-2013, 09:08 PM

Hey got my plate today and it fit great had it on in 5 mins. well mine is a bare frame but it fit perfect thanks (65 chevy 4x4 frame) with 87 suspension

**Captainfab** · 01-12-2013, 12:37 AM

PM coming your way......

Quote:

Originally Posted by Racefan31820

Hi captainfab i will be needing one of your power steering adapter plates, and a steering shaft adapter,for my 65 c10 can you pm me with info on cost and payment info.

Thanks for the compliment Travis

Quote:

Originally Posted by travz500

Hey got my plate today and it fit great had it on in 5 mins. well mine is a bare frame but it fit perfect thanks (65 chevy 4x4 frame) with 87 suspension

1955 mancave · 01-20-2013, 02:45 PM

man that adapter plate is the ---t i had the box mounted in like 15 min. and i'm sure the brake booster adapter will be the same, great job John and after seeing what problems others have had when using other peoples brakets , you have done your work and made it easy for the rest of us.

thanks.

**Captainfab** · 01-20-2013, 11:37 PM

Thank you for the compliment Henry

1955 mancave · 01-27-2013, 11:02 AM

i thought i posted picures so now i will

Quote:

Originally Posted by 1955 mancave

man that adapter plate is the ---t i had the box mounted in like 15 min. and i'm sure the brake booster adapter will be the same, great job John and after seeing what problems others have had when using other peoples brakets , you have done your work and made it easy for the rest of us.

thanks.

SS317 · 01-13-2013, 12:10 AM

Hello Captain. I need info on pricing for an adapter plate and the steering column shaft adapter/rag joint.
1966 C10, 350 engine.
Thanks,
Sean

**Captainfab** · 01-13-2013, 02:15 AM

I'll send you a PM

Quote:

Originally Posted by SS317

Hello Captain. I need info on pricing for an adapter plate and the steering column shaft adapter/rag joint.
1966 C10, 350 engine.
Thanks,
Sean

10-25-2012, 09:46 PM	#2
lowrollin70gmc Too many projects Join Date: Mar 2004 Location: Fargo, ND land of the flat hills Posts: 1,147	Re: Power Steering Adapter Plates Also in need of one for a 68 4x4. The previous owner hacked some holes and I keep breaking steering box bolts! I even keep a ratchet and socket to check the bolts daily. Please shoot me a PM and I'll get you some dinero and an address. Thanks, Andrew __________________ Andrew 84 GMC C1500 SWB 6.2 Diesel/700R4/3.42 "Grandpa's odd duck" 70 GMC C1500 LWB My first truck: shaved, bagged, and more: the lowrollin70gmc 68 K20 Suburban 12V Cummins/NV5600/NP205/D60/11.5AAM 3.73s "Dakota Cadillac" 63 Chevy II Nova Coupe 250 I6/T56/4.56s "Economy car" 53 Willys Wagon 350/NV4500/BW4401/HP D44/9inch “Winter Wagon” 30 Model A 16 Focus ST

10-26-2012, 08:34 AM	#4
gmcpickup66 Registered User Join Date: Oct 2012 Location: Greensboro, NC Posts: 4	Re: Power Steering Adapter Plates Captain what is the cost for PowerSteering adapter and PowerBrakes adapter? You can PM me with info and payment information. Thanks

11-15-2012, 08:39 AM	#7
jonzcustomshop 1961 crewcab Join Date: Dec 2007 Location: missoula, mt Posts: 6,164	Re: Power Steering Adapter Plates got my second cap'n fab plate mounted, this one on a 64 4X4.such a beautiful piece, its a shame to paint it... my next one gets clear coated! A tip or trick, I don't know if this has been mentioned: 1 new hole falls partially over an old one, you guys know how impossible it is to drill out 1/2 a hole... so what I did was drill the other 3 holes, bolt the plate to the frame, and then use the plate as a guide to drill out the oblong hole. __________________ 60 build: http://67-72chevytrucks.com/vboard/s...d.php?t=280904 61 crew build: http://67-72chevytrucks.com/vboard/s...d.php?t=646830 63 build: http://67-72chevytrucks.com/vboard/s...d.php?t=336537 64 'burb build: http://67-72chevytrucks.com/vboard/s...d.php?t=448681 65 'burb build: http://67-72chevytrucks.com/vboard/s...d.php?t=590715 65 build: http://67-72chevytrucks.com/vboard/s...d.php?t=281955

11-15-2012, 10:04 AM	#8
Harley918 Registered User Join Date: Oct 2012 Location: Tulsa ok Posts: 10	Re: Power Steering Adapter Plates Can you send me a pm an tell me how to buy your stuff. Posted via Mobile Device

11-22-2012, 01:49 AM	#11
travz500 Registered User Join Date: Sep 2012 Location: ozawkie ks Posts: 945	Re: Power Steering Adapter Plates ok got a question I am putting the steering box out of my 87 4x4 blazer on my 65 4x4 frame getting rid of the original power steering it dont work well and the box leaks do I need a plate like yours to mount the newer box? I am assuming that the spacers you got on here make up for the dip in the newer frames? and does it line up with original holes in the frame or will I have to drill all new ones? thanks oh and how much for the plate? thank you Travis

10-25-2012, 02:01 AM	#1
Snowbound Registered User Join Date: Aug 2002 Location: Westbank, BC Posts: 403	Re: Power Steering Adapter Plates I'll take a bracket kit for my '65. Please PM me with payment details. Thanks, Brian Posted via Mobile Device __________________ 1965 Chevy Short Box Stepside, 230 - 3 speed, 4:11 gears, original paint rust free survivor. Now sporting a 383 SBC and TKO-600

11-02-2012, 08:58 PM	#6
lowrollin70gmc Too many projects Join Date: Mar 2004 Location: Fargo, ND land of the flat hills Posts: 1,147	Re: Power Steering Adapter Plates Bracket received with great packing and awesome instructions. Thanks, Andrew __________________ Andrew 84 GMC C1500 SWB 6.2 Diesel/700R4/3.42 "Grandpa's odd duck" 70 GMC C1500 LWB My first truck: shaved, bagged, and more: the lowrollin70gmc 68 K20 Suburban 12V Cummins/NV5600/NP205/D60/11.5AAM 3.73s "Dakota Cadillac" 63 Chevy II Nova Coupe 250 I6/T56/4.56s "Economy car" 53 Willys Wagon 350/NV4500/BW4401/HP D44/9inch “Winter Wagon” 30 Model A 16 Focus ST

11-22-2012, 02:42 AM	#12
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,250	Re: Power Steering Adapter Plates Yes, you will need an adapter plate to mount the '87 box onto the '65 frame. I do not know all the specifics on the 4x4 frames, as no one has given me any feedback on those. However on the 2wd's, the adapter plate comes with a template to locate the new holes you will need to drill. One hole is partially overlapping an existing hole as Jon mentioned above. For the guys installing these on a 4x4 frame I include another measurement and 3 pics, in addition to the standard installation instructions. The price is still the same as in post #1...........which is $55.00. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

11-22-2012, 10:37 AM	#13
travz500 Registered User Join Date: Sep 2012 Location: ozawkie ks Posts: 945	Re: Power Steering Adapter Plates well thank you sir when i get to that point I will be in touch with you for a adapter plate thanks again

12-19-2012, 07:58 PM	#14
CarlosRamirez Registered User Join Date: Dec 2012 Location: El Paso, TX Posts: 1	Re: Power Steering Adapter Plates Hi captainfab i will be needing one of your power steering adapter plates, and a steering shaft adapter, can you pm me with info on cost and payment info. Thanks in advance! Posted via Mobile Device

12-20-2012, 08:46 AM	#16
jlsanborn Registered User Join Date: Jun 2011 Location: Spokane, WA Posts: 2,367	Re: Power Steering Adapter Plates Have you got a map with push-pins showing where you've shipped? You've sure touched a lot of trucks out there. Nice work! __________________ '77 K30 3+3 - "The Crummy" http://67-72chevytrucks.com/vboard/s...d.php?t=640134 '67 C10 L/SWB - Soon to be daily driver! http://67-72chevytrucks.com/vboard/s...d.php?t=471776

01-11-2013, 10:51 AM	#18
Racefan31820 Registered User Join Date: Oct 2012 Location: Wv Posts: 2	Re: Power Steering Adapter Plates Hi captainfab i will be needing one of your power steering adapter plates, and a steering shaft adapter,for my 65 c10 can you pm me with info on cost and payment info.

01-11-2013, 09:08 PM	#19
travz500 Registered User Join Date: Sep 2012 Location: ozawkie ks Posts: 945	Re: Power Steering Adapter Plates Hey got my plate today and it fit great had it on in 5 mins. well mine is a bare frame but it fit perfect thanks (65 chevy 4x4 frame) with 87 suspension

01-20-2013, 02:45 PM	#21
1955 mancave Registered User Join Date: Jul 2011 Location: Scottsdale Az. Posts: 325	Re: Power Steering Adapter Plates man that adapter plate is the ---t i had the box mounted in like 15 min. and i'm sure the brake booster adapter will be the same, great job John and after seeing what problems others have had when using other peoples brakets , you have done your work and made it easy for the rest of us. thanks. __________________ 1964 1 Ton flatbed service truck (sold) 1964 C-10 panel (project complete frame up build) 1957 210 post pearl orange

01-20-2013, 11:37 PM	#22
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,250	Re: Power Steering Adapter Plates Thank you for the compliment Henry __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE



Register or Log In To remove these advertisements.

01-13-2013, 12:10 AM	#24
SS317 Registered User Join Date: Dec 2010 Location: Fruita, Colorado Posts: 222	Re: Power Steering Adapter Plates Hello Captain. I need info on pricing for an adapter plate and the steering column shaft adapter/rag joint. 1966 C10, 350 engine. Thanks, Sean __________________ 1966 Chevy C-10 350 Engine 700R4

Register or Log In To remove these advertisements.