|
08-11-2013, 06:07 PM | #1 |
Senior Member
Join Date: Mar 2012
Location: Kansas City, MO
Posts: 2,026
|
Re: Crusty Rusty Leaky Squeaky 67 Step
Thanks, Scott, however I already have a gov lock with a 3.08 stashed in the corner I could use. Was hoping to find a clutch style posi. Searched a number of keywords but couldn't find the craigslist ad. I'm assuming the '91 would be gov lock because I bought one new back then and that was what was in it.
__________________
Victor 57 Chevy Wagon - California Dreamin'"Mecum'd" 9/2022 Dallas, TX Crusty Rusty Leaky Squeaky 67 Consigned 4/2019 Dresden, Germany Maybelline - my '57 Ford 2dr Sedan "Mecum'd" 3/2016 Location unknown Silver Streaker "Mecum'd" 4/2013 Somewhere in Texas |
08-11-2013, 06:13 PM | #2 |
Registered User
Join Date: Mar 2011
Location: Kansas City, Missouri
Posts: 3,541
|
Re: Crusty Rusty Leaky Squeaky 67 Step
His ad just says 3.08 posi rear end, no other info other than that. I text the guy earlier this week to get the info.
Posted via Mobile Device
__________________
Scott |
08-18-2013, 05:01 PM | #3 |
Senior Member
Join Date: Mar 2012
Location: Kansas City, MO
Posts: 2,026
|
Re: Crusty Rusty Leaky Squeaky 67 Step
Well the swap meet yesterday was uneventful. Only saw one 4 series posi and it was missing all the internals. By the time you bought what you needed, you'd have more in it than a new Eaton. Took a pass on that but did come home with some center caps for the wheels. Probably won't be what I end up with, but will work till I have time to design and machine some custom ones.
Picked up the engine on Friday. Block is a first gen 4 bolt main, .030 over 350. Heads are 062 casting Vortecs with a 3 angle valve job, new seals and springs but otherwise stock. They're setup to handle up to a .540 lift cam. Pistons are flat top Hypereutectics with coated skirts. Bob threw away my rods and scrounged up a better set which he reconditioned. Crank was ground and polished and rotating assembly balanced. Rings, bearings, gaskets, Melling oil pump were also in the box. CR came out between 9.7 and 9.8:1 according to the calculator. Probably closer to 9.8 as Bob also decked the block. I already have a Comp Cams kit and an Air Gap manifold for the Vortec heads. Just need to set aside some time to clean and paint the block, heads, water pump and etc. Then check and assemble it all. Also have been busy getting the frame to look a little better. Ran a skim coat of filler on top of the rails in the area next to the inner fenderwells. Tooling marks and repairs left it looking pretty rough. Much better now that it's smoothed out and painted chassis black. Should be able to start assembling the suspension next week when the hardware gets back from the plating company.
__________________
Victor 57 Chevy Wagon - California Dreamin'"Mecum'd" 9/2022 Dallas, TX Crusty Rusty Leaky Squeaky 67 Consigned 4/2019 Dresden, Germany Maybelline - my '57 Ford 2dr Sedan "Mecum'd" 3/2016 Location unknown Silver Streaker "Mecum'd" 4/2013 Somewhere in Texas |
08-18-2013, 05:17 PM | #4 |
Senior Member
Join Date: Mar 2012
Location: Kansas City, MO
Posts: 2,026
|
Re: Crusty Rusty Leaky Squeaky 67 Step
Speaking of suspension, the trailing arms needed a lot of TLC. The rust between the two halves had pushed them apart to the point most of the spot welds were broken. There were also two major areas of rot that will require a patch. I milled a window around the rotted area to prep for welding in a 5/16" thick plate. I then cleaned out the gap between the halves and drew the halves together in the vise. Ran several weld beads to hold everything in place. The last step will be to weld ECE Strong Arm plates on the top and bottom of the arms. I ordered them the other day and hopefully they'll be here next week. You can see from the pictures the before and after up to this point. I also pressed out the rubber bushings to make way for the urethane replacement bushings.
__________________
Victor 57 Chevy Wagon - California Dreamin'"Mecum'd" 9/2022 Dallas, TX Crusty Rusty Leaky Squeaky 67 Consigned 4/2019 Dresden, Germany Maybelline - my '57 Ford 2dr Sedan "Mecum'd" 3/2016 Location unknown Silver Streaker "Mecum'd" 4/2013 Somewhere in Texas |
03-26-2014, 02:24 PM | #5 |
Registered User
Join Date: Sep 2013
Location: Mount Morris,NY
Posts: 788
|
Re: Crusty Rusty Leaky Squeaky 67 Step
this is such an adictive build, once you look at the first page then the second then the third you cant stop and you find yourself an hour into it
__________________
Dean 1972 Custom Camper c/20 5.3 LS swap in progress. http://67-72chevytrucks.com/vboard/s...d.php?t=610187 in God we Trust |
03-26-2014, 09:26 PM | #6 |
Senior Member
Join Date: Mar 2012
Location: Kansas City, MO
Posts: 2,026
|
Re: Crusty Rusty Leaky Squeaky 67 Step
Thanks, Dean. This build thread has meandered around a lot more than my previous one. I didn't really start that thread until the truck was done, so it was sort of the Readers Digest version. I've been able to document this one in much greater detail, so it is a bit of a stemwinder. Nice thing about this approach is, I get the benefit of many great suggestions from my forum buddies and have time to integrate them into the build. I appreciate all who hang out and keep me motivated.
__________________
Victor 57 Chevy Wagon - California Dreamin'"Mecum'd" 9/2022 Dallas, TX Crusty Rusty Leaky Squeaky 67 Consigned 4/2019 Dresden, Germany Maybelline - my '57 Ford 2dr Sedan "Mecum'd" 3/2016 Location unknown Silver Streaker "Mecum'd" 4/2013 Somewhere in Texas |
08-18-2013, 05:21 PM | #7 |
Registered User
Join Date: Aug 2012
Location: Topeka Kansas
Posts: 2,655
|
Re: Crusty Rusty Leaky Squeaky 67 Step
Very nice Vic, I bet you are getting excited now that you are getting closer to assembly.
What color are you going to paint the engine? |
08-18-2013, 06:47 PM | #8 |
Senior Member
Join Date: Mar 2012
Location: Kansas City, MO
Posts: 2,026
|
Re: Crusty Rusty Leaky Squeaky 67 Step
I've settled on Toxic Orange Pearl for the exterior, so my plan is to paint the engine a cream color. I haven't been to the paint store to actually make the decision, but I'm sure they'll have something that will work.
__________________
Victor 57 Chevy Wagon - California Dreamin'"Mecum'd" 9/2022 Dallas, TX Crusty Rusty Leaky Squeaky 67 Consigned 4/2019 Dresden, Germany Maybelline - my '57 Ford 2dr Sedan "Mecum'd" 3/2016 Location unknown Silver Streaker "Mecum'd" 4/2013 Somewhere in Texas |
08-18-2013, 06:16 PM | #9 |
Registered User
Join Date: Mar 2008
Location: kansas city mo
Posts: 898
|
Re: Crusty Rusty Leaky Squeaky 67 Step
Looks great. Those trailing arms were seperated (-;
Posted via Mobile Device
__________________
Project "Edna Marie"http://www.67-72chevytrucks.com/vboa...74#post5998074 Toys: 2014 Dodge Ram 1967 SHORTBED |
08-18-2013, 06:52 PM | #10 |
Senior Member
Join Date: Mar 2012
Location: Kansas City, MO
Posts: 2,026
|
Re: Crusty Rusty Leaky Squeaky 67 Step
Thanks Brian. BTW, opened up the coffin today and the 9" stuff was right where I left it. So one of these days when the Porterbuilt train pulls into the station, we'll have what you need.
__________________
Victor 57 Chevy Wagon - California Dreamin'"Mecum'd" 9/2022 Dallas, TX Crusty Rusty Leaky Squeaky 67 Consigned 4/2019 Dresden, Germany Maybelline - my '57 Ford 2dr Sedan "Mecum'd" 3/2016 Location unknown Silver Streaker "Mecum'd" 4/2013 Somewhere in Texas |
08-19-2013, 08:06 AM | #11 |
Registered User
Join Date: Mar 2009
Location: WARRENSBURG,MISSOURI,64093
Posts: 1,518
|
Re: Crusty Rusty Leaky Squeaky 67 Step
Vic,
I have another set of trailing arm's I got with my '71, you can have them if you want...I work for KCPL and work at the Hawthorn Plant in Independence (Off I 435 & Front street) I have to remove them from another frame I have but the offer stands...let me know. Ben Smith |
08-19-2013, 09:26 AM | #12 | |
Senior Member
Join Date: Mar 2012
Location: Kansas City, MO
Posts: 2,026
|
Re: Crusty Rusty Leaky Squeaky 67 Step
Quote:
__________________
Victor 57 Chevy Wagon - California Dreamin'"Mecum'd" 9/2022 Dallas, TX Crusty Rusty Leaky Squeaky 67 Consigned 4/2019 Dresden, Germany Maybelline - my '57 Ford 2dr Sedan "Mecum'd" 3/2016 Location unknown Silver Streaker "Mecum'd" 4/2013 Somewhere in Texas |
|
08-19-2013, 09:32 AM | #13 |
Registered User
Join Date: Mar 2009
Location: WARRENSBURG,MISSOURI,64093
Posts: 1,518
|
Re: Crusty Rusty Leaky Squeaky 67 Step
Vic,
No worries, let me know if there is anything else you may need, I have some extra parts that I may not be using...... Ben |
08-21-2013, 06:38 PM | #14 | |
Registered User
Join Date: Mar 2008
Location: kansas city mo
Posts: 898
|
Re: Crusty Rusty Leaky Squeaky 67 Step
Quote:
Posted via Mobile Device
__________________
Project "Edna Marie"http://www.67-72chevytrucks.com/vboa...74#post5998074 Toys: 2014 Dodge Ram 1967 SHORTBED |
|
08-19-2013, 10:18 AM | #15 |
Registered User
Join Date: Apr 2003
Location: Indep, MO
Posts: 5,893
|
Re: Crusty Rusty Leaky Squeaky 67 Step
Looks good (Like it always does). Better get after it, you're on a deadline now! MUAHahahaha!
__________________
Boppa's Old Yeller Truck Build, Old Yeller's New Heart! Project Buzz Bomb Flyin' Low! |
08-21-2013, 06:24 PM | #16 |
Senior Member
Join Date: Mar 2012
Location: Kansas City, MO
Posts: 2,026
|
Re: Crusty Rusty Leaky Squeaky 67 Step
Well, the thrash is on. Detray finished my plating ahead of schedule, so I threw a few parts together on the front. Plasma cutter is supposed to be delivered tomorrow, so I can finally get the rearend apart. Got the TH400 down off the engine stand where it has resided since cleanup. Block goes up on the stand later this evening when my neighbor picks up his bambino. Whew! Hope to have it rolling by the end of next week if I cut back on naptimes. I will make it to the Midwest Nats... I will make it to the Midwest Nats...
__________________
Victor 57 Chevy Wagon - California Dreamin'"Mecum'd" 9/2022 Dallas, TX Crusty Rusty Leaky Squeaky 67 Consigned 4/2019 Dresden, Germany Maybelline - my '57 Ford 2dr Sedan "Mecum'd" 3/2016 Location unknown Silver Streaker "Mecum'd" 4/2013 Somewhere in Texas |
08-21-2013, 06:28 PM | #17 |
67cheby
Join Date: Sep 2008
Location: siloam springs ar 72761
Posts: 17,890
|
Re: Crusty Rusty Leaky Squeaky 67 Step
WOW, nice !
|
08-21-2013, 06:47 PM | #18 |
Registered User
Join Date: Aug 2012
Location: Topeka Kansas
Posts: 2,655
|
Re: Crusty Rusty Leaky Squeaky 67 Step
That is a insane amount of fasteners you media blasted no wonder it took so long, the amount of patience required is stagering.
The Cadmium plating turned out very nice if one didn't know better they might think they were gold plated. It looks like you got a good start on assembly, at this rate you will no doubt make the deadline with no help from anyone... |
08-21-2013, 07:22 PM | #19 | |
Senior Member
Join Date: Mar 2012
Location: Kansas City, MO
Posts: 2,026
|
Re: Crusty Rusty Leaky Squeaky 67 Step
Quote:
__________________
Victor 57 Chevy Wagon - California Dreamin'"Mecum'd" 9/2022 Dallas, TX Crusty Rusty Leaky Squeaky 67 Consigned 4/2019 Dresden, Germany Maybelline - my '57 Ford 2dr Sedan "Mecum'd" 3/2016 Location unknown Silver Streaker "Mecum'd" 4/2013 Somewhere in Texas |
|
08-21-2013, 08:02 PM | #20 |
Registered User
Join Date: Aug 2012
Location: Topeka Kansas
Posts: 2,655
|
Re: Crusty Rusty Leaky Squeaky 67 Step
You have 15 days which is more than enough time to complete the engine assembly and instal the drivetrain plus complete the metal work and reassembly of the bed.
I have faith in you. |
08-22-2013, 08:11 AM | #21 |
Registered User
Join Date: Apr 2003
Location: Indep, MO
Posts: 5,893
|
Re: Crusty Rusty Leaky Squeaky 67 Step
Let us know, Hopefully Yeller will be runnin' by the end of the week, and we'll be freed up. Man, I wish our hardware looked like that.
__________________
Boppa's Old Yeller Truck Build, Old Yeller's New Heart! Project Buzz Bomb Flyin' Low! |
08-22-2013, 11:07 AM | #22 |
Registered User
Join Date: Jul 2006
Location: Willis, Texas
Posts: 754
|
Re: Crusty Rusty Leaky Squeaky 67 Step
1st post for this below quoted below
"I'm determined to use it as a daily driver and not over restore it like my other truck. Like many 40+ year old trucks, it has lots of problems. My goal is to address the safety and reliability issues as well as the sheetmetal shortcomings. I doubt it will get anything other than a good coat of epoxy primer and I currently have no plans to convert it to discs or 5 lugs. I will post progress reports as they occur, so follow along if you like." I'm not real sure where this build took a hard left turn from the original plan, but it sure is a fun ride!!
__________________
65Gregg Blue long bed White TBSS 61 Impala “The two most important days in your life are the day you are born and the day you find out why.” Mark Twain |
08-22-2013, 11:17 AM | #23 |
Still Learning
Join Date: Jul 2009
Location: Central Oklahoma
Posts: 10,108
|
Re: Crusty Rusty Leaky Squeaky 67 Step
I'm digging all the gold fasteners. Nice
|
08-22-2013, 11:18 AM | #24 |
Registered User
Join Date: Apr 2003
Location: Indep, MO
Posts: 5,893
|
Re: Crusty Rusty Leaky Squeaky 67 Step
You have to know Vic... If it ain't tight, it ain't right! There's 2 kinds of engineers-he's the good kind.
Posted via Mobile Device
__________________
Boppa's Old Yeller Truck Build, Old Yeller's New Heart! Project Buzz Bomb Flyin' Low! |
08-22-2013, 11:44 AM | #25 |
Registered User
Join Date: Aug 2012
Location: Topeka Kansas
Posts: 2,655
|
Re: Crusty Rusty Leaky Squeaky 67 Step
Vic agreed to take the NCIS Gibs slap in the back of the head if he starts to get too far off course, but honestly I haven't seen anything worth a slap yet.
Everything Vic does is so nice that it's too nice to drive but he's going to drive it anyway, which IMO is the awesome part! Most guys let the quality slip if they are going to be driving it but not Vic it will be the nicest parts hauler anyone has ever seen that's for sure. |
Bookmarks |
|
|