1950 Chevy 3600 - Bumper Punchin' - Page 10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

kulturekat · 05-01-2009, 10:34 AM

its a grinding pad that will become your best friend as well. perfect for paint and durable for gringing down welds and metal. its aggresive more than sandpaper. and comes in different grits as well

c10addict · 05-01-2009, 10:49 AM

Here you go... Flap discs... Love em..

IvelDesigns · 05-01-2009, 10:54 AM

I have a lot of clean up to do. I'll take some before and after shots of what it can do.

The down side is that they are $5-$12 per disk depending on grit and thickness. I believe the brand of disk that bob suggested is Pearl Disk. I'm having a hard time finding them locally, so I picked up a couple different brands to give them each a shot.

As i learned with cut off wheels, it's a good idea to try a couple brands and understand the characteristics of them, then select one brand to stick with. Then you know what to expect when you get into a job and/or the cost of supplies.

c10addict · 05-01-2009, 11:09 AM

I buy them at the local harbor freight store.. You get a 4 pack for $6.00... They hold up pretty well!

IvelDesigns · 05-01-2009, 11:56 AM

i able fell over when i saw the price on the ones Fastenal gets... $12 for one. Granted, it was thick, and looked like it would hold up for a long time. Just can't see spending that much. I may have to do a mini review on them as I play with them.

abadsvt · 05-01-2009, 12:03 PM

I buy mine from Home depot. They have been the cheapest and they last quite a long time. Just thought i would join the conversation a little late.

Josh

Ps.. Its looking sweet!!!!

kulturekat · 05-01-2009, 12:31 PM

yeah both home depot and lowes carry some. even the dewalt brand ones are decent.

**88JRFAN** · 05-02-2009, 01:21 AM

Looking good Levi. You might try a welding shop like airgas or linweld. They will have them in a big box, just not sure on pricing, i get mine from work. They are the best wheel for smoothing up welds. I would use a small wire wheel cup for the frame. Keep up the good work.

Number98 · 05-02-2009, 03:24 PM

Looking good man! That's gonna be a pretty sweet ride when your done.

texanidiot25 · 05-02-2009, 03:29 PM

Pictures, or else...

STOUTE · 05-03-2009, 08:24 PM

Great bulid man

IvelDesigns · 05-04-2009, 01:26 AM

good progress this weekend, but nothing really picture worthy. got the brake pedal, booster and MC installed, plug wires, water pump and carb on, rear frame is boxed, back window is in and the front shocks are done. Also started in on the wiring harness and got the steering column mocked up and painted.

just ordered what should be my last big round of parts from speedway motors, and found some 5" gauges on ebay.

**Dieselwrencher** · 05-04-2009, 05:19 PM

Also try Shoppers Supply on NE 14th for flap wheels. Also, when you get to the point of needing some welding done, load it up and bring it to Baxter and we can get it welded up. It is looking really good. I totally understand about the 20 80 scenario. That is where I'm at on the vette and it is a pita.

IvelDesigns · 05-06-2009, 11:03 PM

Not much to say here other than things are starting to come together. My wife even said tonight, "it's starting to look like a truck again."

couldn't of said it better myself.

and the money shot...

clearance shouldn't be an issue up front since the front tires will be about 1.5" taller than these rollers. I also test fitted the rear, and it looks like with a 1" bump stop, i should be about level.

FnLow69 · 05-06-2009, 11:22 PM

lookin' good....

72BlckButy · 05-07-2009, 07:32 AM

Nice progress Levi!

Can't wait to see it in Kirksville...

kyull67 · 05-07-2009, 10:15 AM

This is going to be a badass truck!

kulturekat · 05-07-2009, 11:44 AM

man this truck is turning out awesome. that read end is looking sick. im working on my s10 swap but im gonan go more traditional looking under the hood with a straight 6. but yours is looking amazing

ANTHONY67 · 05-07-2009, 01:18 PM

man this is going to be killer

72-c20 · 05-07-2009, 02:09 PM

what size is that fuel cell?!

my67chevytruck · 05-07-2009, 02:31 PM

sweet progress !

IvelDesigns · 05-07-2009, 03:11 PM

Quote:

Originally Posted by 72-c20

what size is that fuel cell?!

it's a 22gal cell from speedway motors: http://www.speedwaymotors.com/Steel-...Cells,447.html

It's the 25" wide one.

monte0185 · 05-07-2009, 04:38 PM

I just got done reading this entire thread!! I love 50's model trucks and yours is looking great. Cant wait to see it done!!!

IvelDesigns · 05-07-2009, 11:44 PM

Quote:

Originally Posted by FnLow69

lookin' good....

Quote:

Originally Posted by kyull67

This is going to be a badass truck!

Quote:

Originally Posted by ANTHONY67

man this is going to be killer

Quote:

Originally Posted by my67chevytruck

sweet progress !

Thanks guys. I've had a lot of fun building it and can't wait to get it on the road. I'm gonna drive the wheels off this thing this summer.

Quote:

Originally Posted by 72BlckButy

Nice progress Levi!
Can't wait to see it in Kirksville...

I still think it's realistic that it'll be there. Just need a few stars to align and it'll be there for sure. Oh, i did add a calendar to my garage and am marking off the days as they pass...

Quote:

Originally Posted by kulturekat

man this truck is turning out awesome. that read end is looking sick. im working on my s10 swap but im gonan go more traditional looking under the hood with a straight 6. but yours is looking amazing

thanks for the comments on the rear. This being my first custom 4 link, i've learned a lot, and am happy with how it turned out. I do wish i could lay some cleaner welds though. Not to worried though. I have plans for some customer sheetmetal work to cover it all up. should look pretty trick when done.

Quote:

Originally Posted by monte0185

I just got done reading this entire thread!! I love 50's model trucks and yours is looking great. Cant wait to see it done!!!

congrats on reading through my long winded posts.

jott_06 · 05-08-2009, 06:16 AM

Do you plan to gusset or reinforce the upper bag mounts any? I'm just curious because they will have a lot of weight riding on them and i'd hate so see them bend or break.

05-01-2009, 10:34 AM	#226
kulturekat Registered User Join Date: Dec 2007 Location: stillwater, oklahoma Posts: 566	Re: 1950 Chevy 3600 - Bumper Punchin' its a grinding pad that will become your best friend as well. perfect for paint and durable for gringing down welds and metal. its aggresive more than sandpaper. and comes in different grits as well

05-01-2009, 10:49 AM	#227
c10addict Registered User Join Date: Aug 2007 Location: pittsburgh pa Posts: 1,970	Re: 1950 Chevy 3600 - Bumper Punchin' Here you go... Flap discs... Love em.. Attached Images __________________ 68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08 67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast. 64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten.. 54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread... 07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind.. http://67-72chevytrucks.com/vboard/s...d.php?t=339340 See pics of my trucks in my profile

05-01-2009, 10:54 AM	#228
IvelDesigns Commander Taco Bello Join Date: Sep 2006 Location: Des Moines, Iowa Posts: 2,232	Re: 1950 Chevy 3600 - Bumper Punchin' I have a lot of clean up to do. I'll take some before and after shots of what it can do. The down side is that they are $5-$12 per disk depending on grit and thickness. I believe the brand of disk that bob suggested is Pearl Disk. I'm having a hard time finding them locally, so I picked up a couple different brands to give them each a shot. As i learned with cut off wheels, it's a good idea to try a couple brands and understand the characteristics of them, then select one brand to stick with. Then you know what to expect when you get into a job and/or the cost of supplies. __________________ Bagged '50 3600 - Bumper punchin' road kill since 2009... Bagged '69 C10 Longbed - Bumper punchin' road kill since 2007...

05-01-2009, 11:09 AM	#229
c10addict Registered User Join Date: Aug 2007 Location: pittsburgh pa Posts: 1,970	Re: 1950 Chevy 3600 - Bumper Punchin' I buy them at the local harbor freight store.. You get a 4 pack for $6.00... They hold up pretty well! __________________ 68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08 67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast. 64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten.. 54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread... 07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind.. http://67-72chevytrucks.com/vboard/s...d.php?t=339340 See pics of my trucks in my profile

05-01-2009, 11:56 AM	#230
IvelDesigns Commander Taco Bello Join Date: Sep 2006 Location: Des Moines, Iowa Posts: 2,232	Re: 1950 Chevy 3600 - Bumper Punchin' i able fell over when i saw the price on the ones Fastenal gets... $12 for one. Granted, it was thick, and looked like it would hold up for a long time. Just can't see spending that much. I may have to do a mini review on them as I play with them. __________________ Bagged '50 3600 - Bumper punchin' road kill since 2009... Bagged '69 C10 Longbed - Bumper punchin' road kill since 2007...

05-01-2009, 12:03 PM	#231
abadsvt Senior Member Join Date: Aug 2006 Location: Atascadero, CA Posts: 1,152	Re: 1950 Chevy 3600 - Bumper Punchin' I buy mine from Home depot. They have been the cheapest and they last quite a long time. Just thought i would join the conversation a little late. Josh Ps.. Its looking sweet!!!! __________________ (Project truck) 1970 C10 under complete transformation My current build thread http://67-72chevytrucks.com/vboard/s...d.php?t=212871 Other project: C5 corvette swap into 70 c10 http://67-72chevytrucks.com/vboard/s...=1#post2413517 On Hold

05-01-2009, 12:31 PM	#232
kulturekat Registered User Join Date: Dec 2007 Location: stillwater, oklahoma Posts: 566	Re: 1950 Chevy 3600 - Bumper Punchin' yeah both home depot and lowes carry some. even the dewalt brand ones are decent.

05-02-2009, 01:21 AM	#233
88JRFAN LET'S GO RACIN' Join Date: Oct 2007 Location: SALINA,KS Posts: 1,212	Re: 1950 Chevy 3600 - Bumper Punchin' Looking good Levi. You might try a welding shop like airgas or linweld. They will have them in a big box, just not sure on pricing, i get mine from work. They are the best wheel for smoothing up welds. I would use a small wire wheel cup for the frame. Keep up the good work. __________________ Daren 04 Chevy Extend cab 2500HD 6.0 Liter 4x4 71 CHEVY 3/4 4X4 402 BB, th400/np205, dana44/eaton ho52 w/4:10-TOY Rip El Jay RIP BOBBO'S MOM

05-02-2009, 03:24 PM	#234
Number98 Prestige Worldwide Join Date: Feb 2001 Location: Worldwide Posts: 2,553	Re: 1950 Chevy 3600 - Bumper Punchin' Looking good man! That's gonna be a pretty sweet ride when your done.

05-02-2009, 03:29 PM	#235
texanidiot25 Eat My Rust Join Date: Jan 2007 Location: Cypress, Texas Posts: 3,362	Re: 1950 Chevy 3600 - Bumper Punchin' Pictures, or else...

05-03-2009, 08:24 PM	#236
STOUTE Registered User Join Date: Mar 2009 Location: Port barre,la Posts: 21	Re: 1950 Chevy 3600 - Bumper Punchin' Great bulid man

05-04-2009, 01:26 AM	#237
IvelDesigns Commander Taco Bello Join Date: Sep 2006 Location: Des Moines, Iowa Posts: 2,232	Re: 1950 Chevy 3600 - Bumper Punchin' good progress this weekend, but nothing really picture worthy. got the brake pedal, booster and MC installed, plug wires, water pump and carb on, rear frame is boxed, back window is in and the front shocks are done. Also started in on the wiring harness and got the steering column mocked up and painted. just ordered what should be my last big round of parts from speedway motors, and found some 5" gauges on ebay. __________________ Bagged '50 3600 - Bumper punchin' road kill since 2009... Bagged '69 C10 Longbed - Bumper punchin' road kill since 2007...

05-04-2009, 05:19 PM	#238
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,139	Re: 1950 Chevy 3600 - Bumper Punchin' Also try Shoppers Supply on NE 14th for flap wheels. Also, when you get to the point of needing some welding done, load it up and bring it to Baxter and we can get it welded up. It is looking really good. I totally understand about the 20 80 scenario. That is where I'm at on the vette and it is a pita. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

05-06-2009, 11:03 PM	#239
IvelDesigns Commander Taco Bello Join Date: Sep 2006 Location: Des Moines, Iowa Posts: 2,232	Re: 1950 Chevy 3600 - Bumper Punchin' Not much to say here other than things are starting to come together. My wife even said tonight, "it's starting to look like a truck again." couldn't of said it better myself. and the money shot... clearance shouldn't be an issue up front since the front tires will be about 1.5" taller than these rollers. I also test fitted the rear, and it looks like with a 1" bump stop, i should be about level. __________________ Bagged '50 3600 - Bumper punchin' road kill since 2009... Bagged '69 C10 Longbed - Bumper punchin' road kill since 2007...

05-06-2009, 11:22 PM	#240
FnLow69 Registered User Join Date: May 2005 Location: Washington Posts: 848	Re: 1950 Chevy 3600 - Bumper Punchin' lookin' good.... __________________ [PROJECT] FnLow69- 69 C-10 Full frame & layin' doors [PROJECT] Laidout53 - 53' Dodge Pickup, Full Kustom Build [PROJECT] "Hot Rod" 1931 Model A Bonneville style "Dream as if you'll live forever, Live as if you'll die today" ~ James Dean



Register or Log In To remove these advertisements.

05-07-2009, 07:32 AM	#241
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: 1950 Chevy 3600 - Bumper Punchin' Nice progress Levi! Can't wait to see it in Kirksville... __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

05-07-2009, 10:15 AM	#242
kyull67 Registered User Join Date: Nov 2006 Location: Springfield/Kansas City Posts: 1,842	Re: 1950 Chevy 3600 - Bumper Punchin' This is going to be a badass truck! __________________ The first '67 The current '67 '63 Biscayne

05-07-2009, 11:44 AM	#243
kulturekat Registered User Join Date: Dec 2007 Location: stillwater, oklahoma Posts: 566	Re: 1950 Chevy 3600 - Bumper Punchin' man this truck is turning out awesome. that read end is looking sick. im working on my s10 swap but im gonan go more traditional looking under the hood with a straight 6. but yours is looking amazing __________________ 1969 c-10- daily driver(sold) 1950 chevy 3600 current project http://67-72chevytrucks.com/vboard/s...d.php?t=402562 1955 ford f-100 1968 ford mustang 1966 ford mustang Last edited by kulturekat; 05-07-2009 at 11:45 AM.

05-07-2009, 01:18 PM	#244
ANTHONY67 Registered User Join Date: Nov 2008 Location: FOREST MS Posts: 92	Re: 1950 Chevy 3600 - Bumper Punchin' man this is going to be killer

05-07-2009, 02:09 PM	#245
72-c20 Packrat Join Date: May 2008 Location: Central Iowa Posts: 459	Re: 1950 Chevy 3600 - Bumper Punchin' what size is that fuel cell?! __________________ gone: --'07 Tahoe LTZ 4WD --'68 Firebird 400 Convertible gone: --'72 Chevy K20

05-07-2009, 02:31 PM	#246
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: 1950 Chevy 3600 - Bumper Punchin' sweet progress ! __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470 Last edited by my67chevytruck; 05-07-2009 at 02:31 PM.

05-07-2009, 04:38 PM	#248
monte0185 Registered User Join Date: Oct 2008 Location: Brighton, TN Posts: 1,267	Re: 1950 Chevy 3600 - Bumper Punchin' I just got done reading this entire thread!! I love 50's model trucks and yours is looking great. Cant wait to see it done!!! __________________ A computer once beat me at chess, but it was no match for me at kick boxing. Duct tape is like the force. It has a light side, a dark side, and it holds the world together.

05-08-2009, 06:16 AM	#250
jott_06 Camaro Club Join Date: Jun 2007 Location: ohio Posts: 472	Re: 1950 Chevy 3600 - Bumper Punchin' Do you plan to gusset or reinforce the upper bag mounts any? I'm just curious because they will have a lot of weight riding on them and i'd hate so see them bend or break.

Register or Log In To remove these advertisements.