55.2-59 57 Fleetside C4 build

[NWA58]

Since you asked for feedback on the wheels, the wheel itself is nice. The 15” size is very dated based on what most of the builds are doing today to fit bigger brakes and go-fast equipment. Everyone has an opinion on what they like or would do differently, so run what you like. Wheel/tire combos can dramatically change the look for you or the next guy.

Very nice work and colors on yours. I’m impressed with the speed at which you are moving. Looking forward to seeing it fully assembled. Don’t forget to put some black vinyl or carpet over that Fat Mat extending above the carpet at the firewall!

[57FleetsideC4]

Originally Posted by NWA58

Since you asked for feedback on the wheels, the wheel itself is nice. The 15” size is very dated based on what most of the builds are doing today to fit bigger brakes and go-fast equipment. Everyone has an opinion on what they like or would do differently, so run what you like. Wheel/tire combos can dramatically change the look for you or the next guy.

Very nice work and colors on yours. I’m impressed with the speed at which you are moving. Looking forward to seeing it fully assembled. Don’t forget to put some black vinyl or carpet over that Fat Mat extending above the carpet at the firewall!

Thanks for you opinion. I know the 15's make it look dated and will most likely will go with a set of 20's. I also plan on covering the fat mat with something just have not decided yet. Steve

[Rickysnickers]

I prefer a wheel in the 17" or 18" range. As you know though, it all depends on the look you are going for. I think they look nice.

[57FleetsideC4]

Originally Posted by Rickysnickers

I prefer a wheel in the 17" or 18" range. As you know though, it all depends on the look you are going for. I think they look nice.

Thanks for the input on wheel choice. I will be getting a set of 20's after it is put together, aligned and driving just have to figure out how much rim and tire I can get under the stock rear wheel opening, I had a 18 x 9.5 with 5.5 b.s and a 295/45 which has a section width of 11.7". The tire rubbed the inside wheel house edge but had decent had decent clearance on the outer bedside. I think I can get a 20 x 9.5 with 5.25 b.s. with a 255/45 which has a section width of 10". Just don't want to make a expensive mistake. Steve

[57FleetsideC4]

More progress on my project. Got the front sheet metal wet sanded and rubbed. Install the front fenders, lights and grille. Still looking for a glass shop to put the front and rear window in. Have a shop that will do the alignment just have to figure out what specs to use. Steve

[Jason 56]

Looking good!

[57FleetsideC4]

I got the hood back on and aligned so the body is pretty well complete. I did end up getting a set of 20" wheels and nitto tires it will be close but believe they will fit. I have a appointment to have the front and back windows installed and have someone to paint in the tailgate lettering. The big hold up right now is the rest of the interior. The engine cover will be painted the vanilla shake like the roof and a polished LS 6.0 logo for it. Starting to really look like a truck. Steve

[Jason 56]

The final punch list has to be getting short. Looks to be time for a plate and the first drive. Those wheels should really finish it off. I like your choice

[Rickysnickers]

Looks nice!

[57FleetsideC4]

Originally Posted by Jason 56

The final punch list has to be getting short. Looks to be time for a plate and the first drive. Those wheels should really finish it off. I like your choice

Thank You the list is getting shorter. Relying on other people now to finish it up. Steve

[57FleetsideC4]

Originally Posted by Rickysnickers

Looks nice!

Thank You this 3 1/2-year journey is getting close to being done. Steve

[dsraven]

too bad it looks so awesome, now you won't wanna drive it. haha
great job, keep posting up the pics

[57FleetsideC4]

Originally Posted by dsraven

too bad it looks so awesome, now you won't wanna drive it. haha
great job, keep posting up the pics

Thank You. It is far from perfect so will not mind driving it which should be a lot of fun. That is if I get my interior back soon. Steve

[slammed57]

REALLY looking good!, nice wheel choice!

[57FleetsideC4]

Thanks for the positive comments. I was able to get the tires mounted and balanced and test fit on the truck. Here are a couple of pics one with the 20's and one with the 15's. The 20's really change the attitude of the truck. Steve

[dsraven]

Looking good. Gonna hafta share the brand of glass cleaner you've been using on the front and rear glass. Lol.

[NWA58]

Great choice on the wheels!

[slammed57]

Wow......change the whole look of the truck! lookin sharp!

[57FleetsideC4]

Thanks for the comments guys. I hope to have the glass back in it next week depending on the weather. The vision I had when I bought this project is becoming real. Steve

[Rickysnickers]

Looks good

[57FleetsideC4]

Made some more progress on the project. Had the front and rear windows installed, Had a local pin striper/graphic artist fill in the letters on the tailgate, roof speaker and rear view mirror. Just waiting on the interior so can take it for alignment. Still not sure what specs to use but think 84 corvette would work. Steve

[dsraven]

awesome.

[Jason 56]

Glass looks nice. I would think the 84 vette specs should work for the alignment.

[57FleetsideC4]

Originally Posted by dsraven

awesome.

Thank You

Originally Posted by Jason 56

Glass looks nice. I would think the 84 vette specs should work for the alignment.

Thanks I am going to start with the 84 corvette specs other than I want the rear 0 camber instead of a little negative for tire clearance.

Went to visit the upholstery shop yesterday and not much progress. I will never understand why people take in way more work than they can get done in a reasonable amount of time. It's not like there are lots of interior shops around and they never run out of work. Steve

[57FleetsideC4]

I finally got the seat back and got installed. Drove it up and down the driveway and felt the pedals were to high so moved them down some and also did not have the seat all the way back so that helped to. Just got the headlier back home and door panels will be done soon. Here are some pics of the seat installed. Steve