Project#2 67-72 Restoration's Shop truck

[67cheby]

great progress!

[2manyprojects]

I just saw this one, very cool. I think it's my favorite of all your projects. I plan to be in Richmond the next 2 weekends if you need any misc parts. I've been lazy and haven't got rid of any 67 stuff yet.

Did you get a chance to check the ratio on that rear if you still have it?

[brn agn]

Bye bye crossmember! Those things can be a pain, can't they? Keep up the hard work. You are making great progress. I think we should set up a photo shoot with our "shop trucks" once yours is done.

[VA72C10]

Originally Posted by NewType72

Looks awesome lovin the progress and those caps are awesome perfect patina match too!
Posted via Mobile Device

Thanks, I really like them! My wife....not so much good news is she wants me to get 20's asap....bad news is... $$$

Originally Posted by 67cheby

great progress!

Thanks....trying to buy, start and finish my build before you finish your wiring
J/k

Originally Posted by 2manyprojects

I just saw this one, very cool. I think it's my favorite of all your projects. I plan to be in Richmond the next 2 weekends if you need any misc parts. I've been lazy and haven't got rid of any 67 stuff yet.

Did you get a chance to check the ratio on that rear if you still have it?

Thanks. It's my favorite too! I checked and found a code but haven't found it listed anywhere...need to look at it again and will let you know the code so maybe you can confirm its' ratio...

Originally Posted by brn agn

Bye bye crossmember! Those things can be a pain, can't they? Keep up the hard work. You are making great progress. I think we should set up a photo shoot with our "shop trucks" once yours is done.

It took way too long and injured me...so yes...a pain

And a big 10-4 on the photo shoot....I'll bring the red and white....you bring the blue

Trying to get pics uploaded now...
Posted via Mobile Device
Posted via Mobile Device

[VA72C10]

Still working on pics...but progress today consisted of: removing the clutch pedals, column, and intermediate shaft. Also got the gas tank re-installed and connected other than sending unit wire. Still have to bolt it down and put my NOS filler neck grommet on I emptied the tank being used (from my 70) and no sediment or rust inside

Got the repairs skim coated and will sand and paint tomorrow. Found a rattle can of gloss red paint on my shelf. Test sprayed a spot behind where the bed will be and sanded down witbh 2000 wet/dry (dry) and was pleasantly surprised by the closeness of the color match. Will help in areas I have to cut out sheetmetal...especially the cab corner and lower door on pass side.

Drilled out and collapsed another intermediate shaft I had to use with the van tilt.
Sprayed my new rag joint and the int. shaft and need to remember to paint one of my ps boxes tomorrow... also painted thepower brake booster brackets. Booster has been painted
Posted via Mobile Device

[VA72C10]

Pics
Posted via Mobile Device
Posted via Mobile Device

[VA72C10]

Good, they worked I used the smallest hole saw I had, then used my copper spoon to fill the hole the center bit makes, put the patch in my vice and ground down to size. Patches came out very well considering I still am using flux core at home.

More pics
Posted via Mobile Device
Posted via Mobile Device

[VA72C10]

First pic shows the driver's rocker opened up and rust converter sprayed liberally all inside

Then the second pic is a light skim coat on the driver' s upper channel patch.
Posted via Mobile Device

[VA72C10]

Here's a picture of the gas tank in place with the fuel line connected (I blew air through the lines first and they were surprisingly clean).

I wouldn't have painted the tank but it had some overspray on it and since my bench tilts forward...I wanted it to look good back there
Posted via Mobile Device
Posted via Mobile Device

[BMERDOC]

Nice job! Things are going quickly. I hope you have some more of those panels. The Old Man may need some of them!

[VA72C10]

Thanks, I have a few more of the panels....fit isn't very good but I only use them sparingly and save the leftovers for small patches...

Especially with this being a patina truck I'm trying to cut out as little as possible...

Out to work on it some more....
On the way home from Church I bought the rest of the fluids needed to fire up the engine..... that stuff adds up quick....priced it at auto zone and bought for around 20 cheaper at walmart...
Posted via Mobile Device

[VA72C10]

Progress yesterday...not as much as i'd like and after another dr visit this morning and my wife's bday this evening....trying to fit in a few hours work on the truck....
Posted via Mobile Device
Posted via Mobile Device

[VA72C10]

Posted via Mobile Device
Posted via Mobile Device

[shawno72]

Looking real good as usual..

[Bennett68C10]

Nice progress
Posted via Mobile Device

[Xeen]

Looking good, How long untill we get to see a video of the engine running?

[68 Four on the Floor]

Wheres the air dash at?

[Rusbuilt]

Nice work!

[VA72C10]

Originally Posted by shawno72

Looking real good as usual..

Thanks!

Originally Posted by Bennett--G4L

Nice progress
Posted via Mobile Device

Thank you...a few things took longer than the last time I did them and had to repaint my steering wheel due to humidity and now I'm completely stripping it...

Originally Posted by Xeen

Looking good, How long untill we get to see a video of the engine running?

Hopefully by the weekend

Originally Posted by 68 Four on the Floor

Wheres the air dash at?

In my house need to put my locks in first
Posted via Mobile Device

[VA72C10]

Got the wiring harness in....forgot my 70 was floor shift so have to figure out the nss wiring. No cuts or splices on it though as I remembered and as mentioned...everything worked on my last truck using this harness...

Got the brake rod hooked up to the pedal....forgot I had to drop the column for that...doing things a little out of order as I rush...had to take the ebrake

Got the driver's rocker repaired (patch cut and welded) and skim coat on it. Also re-skim coated the rear patch a final time.

Got my gmc pauls weatherstrip installed on the passenger side...very nice! They do need extra force to shut the door but not absolutely slamming the door.

Painted the frame of my bench seat so it'll have time to dry before it gets re-covered

And installed my painted jack and the jack sticker...

Better pictures tomorrow pending weather (supposed to rain)
Posted via Mobile Device

[VA72C10]

Sorry, keep forgetting to take pictures....the ones above show the patch panel I cut down for the rocker and the wheel with horn cap...you can see the paint looks weird...it started cracking
Posted via Mobile Device

[Xeen]

I looked and couldnt find any paint specialy formulated for steering wheels, im wondering if its just a matter of getting the surface rough enough so it isnt slicker than snot so the paint will bond to it, im guessing its a super tight pore plastic so the paint is having trouble adhering to it, but there has to be a product or combination of prep and product that will make it so that primer will stick.

[VA72C10]

Originally Posted by Xeen

I looked and couldnt find any paint specialy formulated for steering wheels, im wondering if its just a matter of getting the surface rough enough so it isnt slicker than snot so the paint will bond to it, im guessing its a super tight pore plastic so the paint is having trouble adhering to it, but there has to be a product or combination of prep and product that will make it so that primer will stick.

It's actually just impatience by me....it was looking pretty good but I sprayed one more coat today (not waiting the 24hrs) and then an engine clear coat with a light rain outside (100% humidity) and you're not supposed to use if over 60%...it cracked right up....
Posted via Mobile Device

[Xeen]

Oh ok thats what I get for assuming it was'nt user error hahaha!

[ZUBZ]

Dremel comes in handy....