72 Dropmember Suburban

[jtp67-72]

Tell U what I had thought about doin.....since the inner flanges of these hoods vary alot....I think I'm goin to do a slight trimming of that inner flange on hood edge..I've got clearance when closed but worried about movement goin down the road....think trimming will be the answer......jim

[blfuller123]

Originally Posted by jtp67-72

Tell U what I had thought about doin.....since the inner flanges of these hoods vary alot....I think I'm goin to do a slight trimming of that inner flange on hood edge..I've got clearance when closed but worried about movement goin down the road....think trimming will be the answer......jim

I got to looking at my hood and thats not a bad idea.

[jtp67-72]

U can start a little behind where the "trough" would be and end a little ahead....a slight arch cut was what I had in mind without reaching quite up to the 1st bend....If u do it..show us a pic...may become a "SOP" when installing these Tubz....Every time I look them I think of how much fab time ol' Mike saved me!!!........lol.........jim

[NewType72]

New Type72, where do you live, where you can run down to the local junkyard and pick up a burb? I only ask because I want to move there .

Haha there's a pretty rough burb in town that I've spotted too bad I couldn't pick up a car show worthy one for 8500 this last summer or else I'd be drivin that instead

and Calm down Eric wait what am I saying I do live in TURDlock

[blfuller123]

Jim-I was looking at the area where my hood rubbed and its only about an inch long. Your idea may be perfect. The trough area is maybe only 12 -15 inches long and that is the only area on the hood that would have to be trimmed so it should be pretty easy to make it look good.

[jeffg1010]

Hey Brett, I mentioned in Rob's thread that I would post what I did to build my rear air unit.

I used a Vintage Air underdash compact unit and t'ed it into my existing Vintage Air. It cranks out the cold and will freeze you out. Vintage Air does not make a rear air unit, so you have to get creative. Wasn't too tough. It does hang a little low in the rear though, but it doesn't obstruct the view in the rearview mirror. Here is the thread. I believe you can see the final product on page 3.
http://67-72chevytrucks.com/vboard/s...=506262&page=3

OF COURSE... mine is a driver, and you guys are doing some pretty awesome show trucks. But, it may give you a few ideas to work with.

EDIT: I just read through the thread and realized that in my rush to get it done for a beach trip, I didn't post ANY under hood photos or photos of the lines once it was plumbed. Oops.

[blfuller123]

Jeff, if I cant find a factory rear a/c, i am going to do the same thing you did, it looks great.

Im buiding this truck to drive too, I will go to the occasional show but it will be my fair weather driver.

[blfuller123]

I was in the garage earlier and noticed a problem with the paint. The white stripe was supposed to go down to the lower body line. On the front half of the fenders for some reason we ran the tape line to the bottom of the grill instead of down past the body line. This wouldnt be noticible, but if I have trim on, there will be a blue line above the trim on the front part of the fender. I really wasn't wanting to repaint the fenders.

[CLTBurban]

It looks to me like maybe you ran the tape directly across the fender opening which, unfortunately, lines up the way you see it. HOWEVER, it looks KILLER!!! Just my $.02. Maybe you should rethink the trim.

For what it's worth, how hard would it be to just re-tape where you want it and spray just that area? I'm curious if a good wet sanding wouldn't level the surfaces if taped right.

[duallyjams]

Alice is looking good.

[blfuller123]

Thanks guys.

I should have rims and tires installed in the next week or two and maybe I will rethink the trim when they are on. James at Mar-K was saying the fenders have to come off to install the upper trim so there is the time to redo the fenders. Was talking to my dad and he says he can fix it. I just get nervous about the color being different if we have to redo the whole thing.

I got new door handles and new mirrors for Christmas. All I have left for parts on the exterior are trim, bumpers and grill shell and with any luck I will be able to get all that within the next month.

After I get my kids back home tomorrow, I will finish the sanding and buffing.

Once the exterior is done, I am going to finish up the mechanicals. I have factory disc brakes with drop spindles and I think I am going to change over to that kit tha CCP makes with the spindles that narrow the trac and the big rotors.

[jeffg1010]

So, looking ahead a bit... Any chance you'll have it done by June? You could ride over to Arlington and kick off the Hot Rod Power Tour with us. That would be quite a large group of Burbs cruising together!
Posted via Mobile Device

[blfuller123]

Originally Posted by jeffg1010

So, looking ahead a bit... Any chance you'll have it done by June? You could ride over to Arlington and kick off the Hot Rod Power Tour with us. That would be quite a large group of Burbs cruising together!
Posted via Mobile Device

I would love to but I dont think there is any chance it will be done by then.

[jeffg1010]

I got faith in ya! After all, this build just started at the end of May and you are rockin' it! You've got about 150 days! Haha! Even if it isn't "done" (they never are), maybe you can ride up and hang for the first day.
Posted via Mobile Device

[blfuller123]

I will definately go hang out in Arlington the first day.

[blfuller123]

Finished sanding and buffing the drivers side.

[heavy_duty]

This burb is awesome.I like the simple but cool retro style.Keep up the great work.

Ed

[blfuller123]

Wheels and tires are on.

[5150]

Gorgeous!!!!!

[jasonhall]

So nice !!!!
Posted via Mobile Device

[budnikguy]

damn.....

[Number98]

This is one slick Burb man! It keeps getting better too, great choice on the wheels!

[NewType72]

Wow absolutely dig those wheels on your burb great choice
Posted via Mobile Device

[blfuller123]

Thanks guys. Here is one more picture.

[BB72CHEVKT]

Looking better all the time.