|
12-05-2022, 01:08 PM | #1 |
chevy truck fan
Join Date: Mar 2005
Location: Gilbert, arizona 85298
Posts: 1,981
|
Re: 66 GMC Long to Short LS Swap
hhmmm..ok... I just added a 120ohm resistor to my OBD2 port end. It was a bit nerve racking as those data wires are pretty delicate! ..LOL! I get a good ohm range now: 62.3-62.5 at the port. the god thing is now my DD das BIM appears to be working (communicating with ECM) now!
by chance did you do anything related to your pedal wires? |
12-05-2022, 05:27 PM | #2 | |
Registered User
Join Date: Oct 2017
Location: Calgary, Alberta
Posts: 205
|
Re: 66 GMC Long to Short LS Swap
Quote:
|
|
12-08-2022, 11:10 AM | #3 |
chevy truck fan
Join Date: Mar 2005
Location: Gilbert, arizona 85298
Posts: 1,981
|
Re: 66 GMC Long to Short LS Swap
duncan, thank you for the reply, I am wondering if you have a "plan of attack" related to the pedal wires? I swapped a '13 into my '86 and have used all the factory harness & connector(s) IE: X109 connector which includes the pedal wires. I am curious to see what others are doing related to the pedal wires.
thanks again.. |
12-16-2022, 07:45 PM | #4 | |
Registered User
Join Date: Oct 2017
Location: Calgary, Alberta
Posts: 205
|
Re: 66 GMC Long to Short LS Swap
Quote:
|
|
12-16-2022, 08:03 PM | #5 |
Registered User
Join Date: Oct 2017
Location: Calgary, Alberta
Posts: 205
|
Re: 66 GMC Long to Short LS Swap
I re-sprayed the interior after getting the colour tweaked a bit. Painted the glove box lid, heater control, ash tray and the steering column at the same time. Painted the pedal assemblies, e brake handle and a pile of other small parts as well. Got everything installed in the interior.
Under the hood I got the steering, brakes and transmission linkage reassembled with all the newly painted bits. Bolted up the hood hinges as well. Made up a spring stretcher so I could sandblast and paint the hood hinge springs |
12-19-2022, 12:55 PM | #6 |
chevy truck fan
Join Date: Mar 2005
Location: Gilbert, arizona 85298
Posts: 1,981
|
Re: 66 GMC Long to Short LS Swap
duncan, thanks for the reply. your routing and tideness looks very nice! wondering... so are your pedal wires continuous from the ECM to the tac/pedal conn.? when you lengthened them did you use same gauge and color or ???
thank you again for your time |
12-24-2022, 03:55 PM | #7 |
Registered User
Join Date: Oct 2017
Location: Calgary, Alberta
Posts: 205
|
Re: 66 GMC Long to Short LS Swap
Yes, they are continuos. I used the same gauge wire, but all one colour, spliced right in the middle of the harness
|
12-24-2022, 04:14 PM | #8 |
Registered User
Join Date: Oct 2017
Location: Calgary, Alberta
Posts: 205
|
Re: 66 GMC Long to Short LS Swap
Its been ridiculously cold here the last week which makes staying warm in the shop very inviting. Got some time to do a little machining project. Made some brake line clamps out of aluminum. Had to replace a leaky T fitting on the back axle for the rear brake lines. Secured the lines down the frame rail with the new brackets and got everything bled.
My front passenger fender had a big long flat spot all the way down the top of the front half. My hammer and dolly skills aren't that great yet so I decided it would be easier to just replace the damaged section. I found a fender with a good front half, chopped them up and made to into one. |
12-29-2022, 01:22 PM | #9 | |
Registered User
Join Date: Jan 2013
Location: roseville
Posts: 823
|
Re: 66 GMC Long to Short LS Swap
Quote:
__________________
My Current Trucks: 1958 Apache BBW 4.8LS/4l60 "Lucky" Built By Me 1958 GMC BBW LS1/4l60 "The Kraken" Built By Delmo |
|
01-18-2023, 10:26 PM | #10 |
Registered User
Join Date: Oct 2017
Location: Calgary, Alberta
Posts: 205
|
Re: 66 GMC Long to Short LS Swap
I've been procrastinating on getting back to work on the doors for way too long now. Convinced myself to give it another shot. Spent the last few weeks bending, cutting, welding, adding metal to one edge, removing metal from another. I used ratchet straps and blocks on my welding table to bend the top of the door back in, I have had these doors on and off what feels like 100 times! Finally managed to get both doors fitting pretty well. Body worked the driver door and got it in primer. Still working on fine tuning the passenger door and cowl.
This is an huge weight off my shoulders, I had all but given up. http://http://http:// |
12-26-2022, 01:27 PM | #11 |
chevy truck fan
Join Date: Mar 2005
Location: Gilbert, arizona 85298
Posts: 1,981
|
Re: 66 GMC Long to Short LS Swap
nice job!!! good progress
|
12-26-2022, 04:33 PM | #12 |
Registered User
Join Date: Mar 2015
Location: Washington State
Posts: 1,644
|
Re: 66 GMC Long to Short LS Swap
damn fine job of those clamps!!!
__________________
John 3:16 - Saved me... God Bless |
12-27-2022, 07:55 AM | #13 |
Registered User
Join Date: Sep 2008
Location: Newport, North Carolina
Posts: 622
|
Re: 66 GMC Long to Short LS Swap
Looking good and I really those those clamps.
|
01-19-2023, 03:26 AM | #14 |
Registered User
Join Date: Aug 2020
Location: Braunschweig, Lower Saxony, Germany
Posts: 763
|
Re: 66 GMC Long to Short LS Swap
Fantastic work and looks damn good.
I can empathize with your pain. I did the same with my doors.
__________________
------------------------------------------- Greetings Harald My 62 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=829782 |
02-20-2023, 01:19 PM | #15 |
Registered User
Join Date: Oct 2017
Location: Calgary, Alberta
Posts: 205
|
Re: 66 GMC Long to Short LS Swap
Did a bit of metal work on the cowl and the rocker to get the gaps right.
and then sanding started, followed by more sanding........and a bit of seam sealer, then more sanding. Learned a cool technique for getting body lines laser straight with masking tape. I am pushing hard on the bodywork but it feels like it is endless! Really hoping to get at least the cab and doors 100%. Planning to build a paint booth in the spring and start getting some colour on this thing |
02-20-2023, 02:03 PM | #16 |
Registered User
Join Date: Feb 2012
Location: Beautiful BC, Canada, eh?!
Posts: 2,213
|
Re: 66 GMC Long to Short LS Swap
Proud of you for taking it to this level of perfection!
__________________
1961 Apache: "Grabber Orange" Shortboxed, pancake, step-notch, air-ride, boosted-LS 1977 Silverado: Shortboxed & dropped, potato-potato V8 Pontiac Firefly (Chevy Sprint): The ultimate engine swap: 5.7L in a 1.0L bag Lotus Super 7 Replica: Scratch-built street-legal rollerskate |
02-21-2023, 11:21 AM | #17 |
Registered User
Join Date: Sep 2008
Location: Newport, North Carolina
Posts: 622
|
Re: 66 GMC Long to Short LS Swap
^ For sure! Those body lines and gaps and panel alignment are looking very nice!
|
02-21-2023, 12:03 PM | #18 |
Registered User
Join Date: Aug 2020
Location: Braunschweig, Lower Saxony, Germany
Posts: 763
|
Re: 66 GMC Long to Short LS Swap
Perfect, high level with this work, great.
__________________
------------------------------------------- Greetings Harald My 62 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=829782 |
02-22-2023, 07:44 PM | #19 |
Registered User
Join Date: Nov 2015
Location: Trenton Ky
Posts: 93
|
Re: 66 GMC Long to Short LS Swap
Excellent thread, DunkinK. Had knee surgery yesterday and this gave me something good to read today. You've come a long way and I commend your dedication to this build. Looking forward to the end. It's gonna be a killer truck!
|
02-23-2023, 01:11 PM | #20 |
Registered User
Join Date: Oct 2017
Location: Calgary, Alberta
Posts: 205
|
Re: 66 GMC Long to Short LS Swap
Thanks guys for the kind words. It's far from perfect but I am happy with how its turning out. It is a never ending circle with the body work. I got the passenger side done, but after learning a bunch of things the driver side is way nicer, so now I want to go back and redo the passenger side. At this rate I should be done the body work in about 2 years! At some point I need to just leave well enough alone. I never intended for this to be a show truck, just a nice driver.
|
02-23-2023, 01:20 PM | #21 |
Registered User
Join Date: Aug 2020
Location: Braunschweig, Lower Saxony, Germany
Posts: 763
|
Re: 66 GMC Long to Short LS Swap
Your work will be a show winner.
Hopefully the truck isn't too good for you to drive every day.
__________________
------------------------------------------- Greetings Harald My 62 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=829782 |
02-23-2023, 10:38 PM | #22 |
Registered User
Join Date: Feb 2012
Location: Beautiful BC, Canada, eh?!
Posts: 2,213
|
Re: 66 GMC Long to Short LS Swap
The more I worked on the body of my '61, the less I cared about perfection.
__________________
1961 Apache: "Grabber Orange" Shortboxed, pancake, step-notch, air-ride, boosted-LS 1977 Silverado: Shortboxed & dropped, potato-potato V8 Pontiac Firefly (Chevy Sprint): The ultimate engine swap: 5.7L in a 1.0L bag Lotus Super 7 Replica: Scratch-built street-legal rollerskate |
11-08-2023, 06:54 PM | #23 |
Registered User
Join Date: Oct 2017
Location: Calgary, Alberta
Posts: 205
|
Re: 66 GMC Long to Short LS Swap
Long overdue for an update.
I assembled the bed and built a lifting frame so I can move it with my engine hoist. I got the insides of the doors, door panels and hardware painted. Got the cab and doors shot with high build. Learned a hard lesson there. I had always heard that it sprays out with a bit of texture to it. Videos I had watched said you can just knock it down quick with a DA and then start blocking. I guess I should have reduced it down a lot more because it was really textured. I thought it would flatten out but it didn't! It took for ever to sand the texture out to a point where I could start blocking it. Of course that was all by hand in the door jambs, back of the cab, above the windshield. Once I got it all sanded flat with 220 grit I shot some guide coat on and started blocking it out with 320 grit. Found a few areas in the body work on the roof that I am not happy with so back to body filler again. I just can't leave well enough alone. I am really sick of sanding! Now I see why body and paint cost so much! http://http:// Did a little spray out of the colours on and old door panel. The green base coat looked perfect when it was wet but once it dried and I shot the clear it was much darker than I wanted. It is crazy how much it changed. I had the paint store re-tint it and did another spray out. Closer but still not quite right. |
12-31-2023, 02:36 PM | #24 |
Registered User
Join Date: Oct 2017
Location: Calgary, Alberta
Posts: 205
|
Re: 66 GMC Long to Short LS Swap
Took advantage of some time off for the holidays and got to work on getting some paint done. had to spend a couple days deep cleaning the shop after doing all the body work. Spent a full day to mask everything off. Tweaked the colour on the base coat 5 times until I was happy with it. got the cab and the door sprayed. Its not perfect but I a happy with the results considering it was my first paint job. I ended up just spraying it in the middle of the shop with the big exhaust fan on.
[IMG][IMG][IMG][IMG][IMG][IMG][IMG][IMG][IMG][IMG][IMG][IMG][IMG] I have to repaint the passenger door, found a few ripples in the bodywork that I didn't catch before paint. Got the windshield and back glass installed as well. |
12-31-2023, 04:54 PM | #25 |
Registered User
Join Date: Aug 2020
Location: Braunschweig, Lower Saxony, Germany
Posts: 763
|
Re: 66 GMC Long to Short LS Swap
It turned out beautifully.
__________________
------------------------------------------- Greetings Harald My 62 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=829782 |
Bookmarks |
|
|