Nsane 52' Chevy Truck! - Page 10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

xpickup · 09-01-2011, 10:17 AM

DeWayne, Here are some pictures. I used a DD to spline coupling to couple the sidewinder box to the steering box. Made a plate to mount the sidewinder box to the frame that way you can remove the cab without removing the box. It worked out really well. I used the stubby column with double drops. I mounted the motor behind the cab (crew cab) I am making the ramp bed out of tubing for the structure. The sides will be painted with interal boxs and to deck will be polished alum. The rear beaver tail (ramps) flip up because my buddy wanted to also be able to pull a goose neck trailer with it. If you need anymore pic let me know.

Shannon

Nsanehotrodz · 09-04-2011, 11:09 AM

Quote:

Originally Posted by xpickup

DeWayne, Here are some pictures. I used a DD to spline coupling to couple the sidewinder box to the steering box. Made a plate to mount the sidewinder box to the frame that way you can remove the cab without removing the box. It worked out really well. I used the stubby column with double drops. I mounted the motor behind the cab (crew cab) I am making the ramp bed out of tubing for the structure. The sides will be painted with interal boxs and to deck will be polished alum. The rear beaver tail (ramps) flip up because my buddy wanted to also be able to pull a goose neck trailer with it. If you need anymore pic let me know.

Shannon

Thanks for the pics! Sounds like its gonna be a nice truck.

DeWayne

Nsanehotrodz · 09-07-2011, 08:00 PM

I started the repairs on the passenger door today, I'll post more pics tomorrow after I blast the inside of the door and finish the repair.

Nsanehotrodz · 09-13-2011, 08:31 PM

I finished repairing the front fender today. The drivers door should be finished tonight, then into the booth! DeWayne

Russell Ashley · 09-13-2011, 09:28 PM

Do you always do some of the welds and grind them before adding more welds, or was that to show us amateurs how smooth you can make a panel joint without using filler? Is that tig welds?
Beautiful work, very inspirational. Keep the pics coming.

Nsanehotrodz · 09-13-2011, 10:10 PM

Quote:

Originally Posted by Russell Ashley

Do you always do some of the welds and grind them before adding more welds, or was that to show us amateurs how smooth you can make a panel joint without using filler? Is that tig welds?
Beautiful work, very inspirational. Keep the pics coming.

Thanks Russell, I grind after each set of welds. The welds in the pic are mig. The bad thing about this is, I found two rust free doors today

! Oh well I'll save them for the next truck. I'll have more tomorrow! DeWayne

Nsanehotrodz · 09-20-2011, 08:45 PM

More pics! I finshed the passenger side front fender today, and started setting the hood gap. DeWayne

superfly · 10-03-2011, 12:04 AM

What do you charge per hour As i may be Needing your Services On a 3 window cab that i well am trying to make look ok but everytme i see your work i want to cry and hang my head.
Jaime

Nsanehotrodz · 10-03-2011, 06:03 PM

Quote:

Originally Posted by superfly

What do you charge per hour As i may be Needing your Services On a 3 window cab that i well am trying to make look ok but everytme i see your work i want to cry and hang my head.
Jaime

I sent you a pm.

Nsanehotrodz · 10-03-2011, 07:06 PM

Here are a couple pics of the cab everything is in the bodywork stage right now. I'll post more pics when we have the color on it.

hotrod1 · 10-03-2011, 08:02 PM

this is art work!

Nsanehotrodz · 10-18-2011, 03:17 PM

Quote:

Originally Posted by hotrod1

this is art work!

Thanks! Here's a little teaser pic, straight out of the booth. DeWayne

renegade8720 · 10-18-2011, 03:24 PM

Looks good! What is that color called?

Renegade

essner · 10-19-2011, 02:47 AM

this might be a stupid question but im new so do you weld with a tig?

Nsanehotrodz · 10-19-2011, 09:01 AM

Quote:

Originally Posted by renegade8720

Looks good! What is that color called?

Renegade

Thanks, its called Laser Blue.

Quote:

Originally Posted by essner

this might be a stupid question but im new so do you weld with a tig?

Everything is Mig as of right now, but I'm looking to purchase a new tig soon.

DeWayne

mknittle · 10-19-2011, 10:14 AM

I like that blue dodge had a similar color in the early 80s that I really liked

beautiful work!

**Dieselwrencher** · 10-19-2011, 04:10 PM

Man you do awesome work and you also work fast! Great job! Ryan.

71Sleeper · 10-20-2011, 01:02 AM

Can't wait to see some more paint. Going to look killer!

72Mountaineer · 10-20-2011, 07:19 AM

Quote:

Originally Posted by Nsanehotrodz

Thanks Russell, I grind after each set of welds. The welds in the pic are mig. The bad thing about this is, I found two rust free doors today

! Oh well I'll save them for the next truck. I'll have more tomorrow! DeWayne

Just wondering, if you grind after each set of welds, and if you weld the joints solid in the end, how much metal is removed from the original panels that are being joined? Wouldn't they be much thinner after all the grinding?

Nsanehotrodz · 10-20-2011, 07:36 PM

Quote:

Originally Posted by mknittle

I like that blue dodge had a similar color in the early 80s that I really liked

beautiful work!

Thanks!

Quote:

Originally Posted by Dieselwrencher

Man you do awesome work and you also work fast! Great job! Ryan.

Thanks!

Quote:

Originally Posted by 71Sleeper

Can't wait to see some more paint. Going to look killer!

Thanks! I'll post more next week.

Quote:

Originally Posted by 72Mountaineer

Just wondering, if you grind after each set of welds, and if you weld the joints solid in the end, how much metal is removed from the original panels that are being joined? Wouldn't they be much thinner after all the grinding?

The key is to only grind the weld. Fit-up is very important. When I grind the welds the first round I leave them just a little higher than the base metal. Then finish them when it is completely welded. Thanks

duwem · 10-21-2011, 01:28 PM

Between this and the Ironworks Truck we have some top notch builds going on! Cant wait to see more of the pieces in paint. That is a nice shade of blue!

**jocko** · 10-21-2011, 02:03 PM

have to agree with that, this is one nice truck, and an excellent lesson in welding!

Nsanehotrodz · 10-21-2011, 08:27 PM

Quote:

Originally Posted by duwem

Between this and the Ironworks Truck we have some top notch builds going on! Cant wait to see more of the pieces in paint. That is a nice shade of blue!

Thanks! The guys at Ironworks have an unreal amount of talent.

Quote:

Originally Posted by jocko

have to agree with that, this is one nice truck, and an excellent lesson in welding!

Thanks, I'm glad I can help.

DeWayne

**Dieselwrencher** · 10-21-2011, 10:33 PM

DeWayne, dude, you have an unreal amount of talent as well! Don't cut your self short!

Nsanehotrodz · 10-25-2011, 07:07 PM

Quote:

Originally Posted by Dieselwrencher

DeWayne, dude, you have an unreal amount of talent as well! Don't cut your self short!

Thanks dieselwrencher, we've been working very hard finishing the bodywork on the 52'. I bought a new toy today to speed things up a bit.

09-01-2011, 10:17 AM	#226
xpickup Registered User Join Date: Jan 2007 Location: York, Pa. Posts: 1,386	Re: Nsane 52' Chevy Truck! DeWayne, Here are some pictures. I used a DD to spline coupling to couple the sidewinder box to the steering box. Made a plate to mount the sidewinder box to the frame that way you can remove the cab without removing the box. It worked out really well. I used the stubby column with double drops. I mounted the motor behind the cab (crew cab) I am making the ramp bed out of tubing for the structure. The sides will be painted with interal boxs and to deck will be polished alum. The rear beaver tail (ramps) flip up because my buddy wanted to also be able to pull a goose neck trailer with it. If you need anymore pic let me know. Shannon Attached Images

09-07-2011, 08:00 PM	#228
Nsanehotrodz Registered User Join Date: Jul 2010 Location: White Pine, TN Posts: 1,261	Re: Nsane 52' Chevy Truck! I started the repairs on the passenger door today, I'll post more pics tomorrow after I blast the inside of the door and finish the repair.

09-13-2011, 08:31 PM	#229
Nsanehotrodz Registered User Join Date: Jul 2010 Location: White Pine, TN Posts: 1,261	Re: Nsane 52' Chevy Truck! I finished repairing the front fender today. The drivers door should be finished tonight, then into the booth! DeWayne

09-13-2011, 09:28 PM	#230
Russell Ashley Registered User Join Date: May 2010 Location: Lawrenceville, Ga Posts: 2,648	Re: Nsane 52' Chevy Truck! Do you always do some of the welds and grind them before adding more welds, or was that to show us amateurs how smooth you can make a panel joint without using filler? Is that tig welds? Beautiful work, very inspirational. Keep the pics coming.

09-20-2011, 08:45 PM	#232
Nsanehotrodz Registered User Join Date: Jul 2010 Location: White Pine, TN Posts: 1,261	Re: Nsane 52' Chevy Truck! More pics! I finshed the passenger side front fender today, and started setting the hood gap. DeWayne

10-03-2011, 12:04 AM	#233
superfly Registered User Join Date: Sep 2009 Location: Roseau Mn Posts: 24	Re: Nsane 52' Chevy Truck! What do you charge per hour As i may be Needing your Services On a 3 window cab that i well am trying to make look ok but everytme i see your work i want to cry and hang my head. Jaime

10-03-2011, 07:06 PM	#235
Nsanehotrodz Registered User Join Date: Jul 2010 Location: White Pine, TN Posts: 1,261	Re: Nsane 52' Chevy Truck! Here are a couple pics of the cab everything is in the bodywork stage right now. I'll post more pics when we have the color on it.

10-03-2011, 08:02 PM	#236
hotrod1 56 - autocross Join Date: Apr 2010 Location: Camarillo, Ca Posts: 1,121	Re: Nsane 52' Chevy Truck! this is art work!

10-18-2011, 03:24 PM	#238
renegade8720 Registered User Join Date: Nov 2007 Location: Kingsport, TN Posts: 193	Re: Nsane 52' Chevy Truck! Looks good! What is that color called? Renegade

10-19-2011, 02:47 AM	#239
essner Registered User Join Date: Jul 2011 Location: Hawaii Posts: 50	Re: Nsane 52' Chevy Truck! this might be a stupid question but im new so do you weld with a tig?

10-19-2011, 10:14 AM	#241
mknittle Registered User Join Date: Jul 2011 Location: Auburn ca. Posts: 2,886	Re: Nsane 52' Chevy Truck! I like that blue dodge had a similar color in the early 80s that I really liked beautiful work! __________________ Mark My GMC build. http://67-72chevytrucks.com/vboard/s...d.php?t=536602

10-19-2011, 04:10 PM	#242
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,142	Re: Nsane 52' Chevy Truck! Man you do awesome work and you also work fast! Great job! Ryan. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

10-20-2011, 01:02 AM	#243
71Sleeper Registered User Join Date: Jul 2011 Location: Phenix City, AL Posts: 993	Re: Nsane 52' Chevy Truck! Can't wait to see some more paint. Going to look killer! __________________ 71 Ol' Blue: http://67-72chevytrucks.com/vboard/s...d.php?t=474752 Carving the Jake-olantern: http://67-72chevytrucks.com/vboard/s...d.php?t=679537

10-21-2011, 01:28 PM	#246
duwem Registered User Join Date: Oct 2010 Location: WI Posts: 347	Re: Nsane 52' Chevy Truck! Between this and the Ironworks Truck we have some top notch builds going on! Cant wait to see more of the pieces in paint. That is a nice shade of blue!

10-21-2011, 02:03 PM	#247
jocko Senior Member Join Date: Oct 2009 Location: Godley, TX Posts: 17,975	Re: Nsane 52' Chevy Truck! have to agree with that, this is one nice truck, and an excellent lesson in welding!



Register or Log In To remove these advertisements.

10-21-2011, 10:33 PM	#249
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,142	Re: Nsane 52' Chevy Truck! DeWayne, dude, you have an unreal amount of talent as well! Don't cut your self short! __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

Register or Log In To remove these advertisements.