Daverods 52 - Page 10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

daverod · 04-10-2011, 11:40 PM

Welded my other stake pocket on. Cut a big ass hole in my frame. I don't have my bags yet so I was just going by the picture.

ruffrida2005 · 04-11-2011, 11:43 AM

Looks good, what did you use to cut it with?

daverod · 04-11-2011, 01:56 PM

grinder w/cut off wheel.

Strodder · 04-11-2011, 03:36 PM

That was easy to do when my plasma cutter worked.

ruffrida2005 · 04-11-2011, 07:33 PM

I think I'll wait till I pick up my buddy's plasma.

daverod · 04-11-2011, 08:42 PM

Was really easy. Just cut it on the side of the frame on the outside. Do a few pie cuts on the inside and hit it with the grinding wheel. Took about 30 min.

Strodder · 04-11-2011, 09:03 PM

It 30 seconds with the plasma cutter.

daverod · 04-11-2011, 10:52 PM

one minute your all oh no you don't need a plasma then the next your all the plasma's the $hit.

Just messin. Did my other hole it only took about 15 min. Still need to figure out where to mount my engine. I bought the s10 v8 mounts but now I don't think I can use them.

Guys bringing me some s10 15" rims just so I can wheel it around. Just thinking about rear ends?

YouTube - Clutch - The Mob Goes Wild

Hit ctrl,alt,delete at the same time the fuzzy part goes away.

Strodder · 04-12-2011, 12:05 AM

I didn't say Plasma Cutters are $hit. Just mine was when it blew up.

ruffrida2005 · 04-12-2011, 10:23 AM

I think I'll use the plasma since I cant turn my frame over like yours Dave.

And is that the dude from Gold Rush? My 2y/o was watching it with me and said Not Nice.

daverod · 04-12-2011, 01:37 PM

I was just thinking what a pain it would be if I was laying on my back.

Who says you can't tip it on its side. Whats a two year old know about whats nice. I thought it was verrry nice.

You need to educate that kid.

You know your in a good bar when it has chicken wire. Reminds me of my days in the Navy.

The good old days. When I did'nt have to work or worry about makin the house payment. When gas was a buck. 1980

ruffrida2005 · 04-12-2011, 10:59 PM

In 1980 I was still swimmin around looking for a out. But I do remember gas being less then a buck about 15 years ago.

Alan's Classic · 04-12-2011, 11:34 PM

If I ever get around to my 55, I will have to reread this and see how it's done.

daverod · 04-12-2011, 11:56 PM

I really have no idea.

I just post pictures and do what people tell me to do.

Where's my bags!!! Got some stock 15" rims today now I need some tires.

bubba327 · 04-13-2011, 12:01 AM

Quote:

Originally Posted by daverod

I really have no idea.

I just post pictures and do what people tell me to do.

I have seen the pictures that You and Strodder post

daverod · 04-13-2011, 12:10 AM

I'm thinking about giving my parts washer an facelift.

Strodder · 04-13-2011, 03:46 PM

You perv, but that's what I like about you....

daverod · 04-13-2011, 04:18 PM

I'm not to sure if I like the first two but the last one for sure.

Ya I think I'll make it lioke the last one.

oh the guy in the brown truck just drove by.

ruffrida2005 · 04-19-2011, 01:11 AM

you got that link system yet?

daverod · 04-19-2011, 11:21 PM

Gave up waiting for my bags thought I would put my cab on and do my radiator stuff.

When you use the s10 frame the radiator hits the gear box so you have to mod the bracket that holds it and use a different radiator. Not sure which radiator I'm going to use? Also had to trim my inner fenders to clear some stuff. Not sure if I cut them enough. I guess I'll find out when I get my bags on. Figured out stock s10 rim don't fit with my spindles for some reason. I guess I need more of an offset. Good enough for now they just don't go on all the way.

daverod · 04-20-2011, 08:38 PM

http://cgi.ebay.com/209612-19-X-22-A...-/110414176704

I found this radiator. Its the right size but it says engine oil cooler. Could this also be used as a trans'mission cooler?

ruffrida2005 · 04-20-2011, 10:14 PM

Yes you can.

That's how mine was hooked up in my 64.

daverod · 04-20-2011, 11:00 PM

That's good I was sick of looking.

Guess ill keep looking its got to be 22 by 19 not 19 by 22.Dumb as. Found this one 40 cheaper and it's 22x19.

ruffrida2005 · 04-20-2011, 11:03 PM

still no 2 link? I've been messing with mine. I got my bungs welded in and was taping out the threads.

daverod · 04-20-2011, 11:19 PM

ekstensive aka "brothers"

They said I could have it cheap not fast. I should have had my bags by now though. I guess they are going to ship it all together. Not as if I don't have stuff to work on. Need to get my engine so I can see how to mount it. I'm thinking I'll be cutting my floor boards. The Iron Duke.

Least it has a name, maybe someday it will have a thread.

04-10-2011, 11:40 PM	#226
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods 52 Welded my other stake pocket on. Cut a big ass hole in my frame. I don't have my bags yet so I was just going by the picture. Attached Images __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 04-10-2011 at 11:41 PM.

04-11-2011, 11:43 AM	#227
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: Daverods 52 Looks good, what did you use to cut it with? __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

04-11-2011, 01:56 PM	#228
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods 52 grinder w/cut off wheel. __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it"

04-11-2011, 03:36 PM	#229
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: Daverods 52 That was easy to do when my plasma cutter worked. __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT*

04-11-2011, 07:33 PM	#230
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: Daverods 52 I think I'll wait till I pick up my buddy's plasma. __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

04-11-2011, 08:42 PM	#231
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods 52 Was really easy. Just cut it on the side of the frame on the outside. Do a few pie cuts on the inside and hit it with the grinding wheel. Took about 30 min. __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it"

04-11-2011, 09:03 PM	#232
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: Daverods 52 It 30 seconds with the plasma cutter. __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT*

04-12-2011, 12:05 AM	#234
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: Daverods 52 I didn't say Plasma Cutters are $hit. Just mine was when it blew up. __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT*

04-12-2011, 10:23 AM	#235
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: Daverods 52 I think I'll use the plasma since I cant turn my frame over like yours Dave. And is that the dude from Gold Rush? My 2y/o was watching it with me and said Not Nice. __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759 Last edited by ruffrida2005; 04-12-2011 at 10:40 AM.

04-12-2011, 01:37 PM	#236
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods 52 I was just thinking what a pain it would be if I was laying on my back. Who says you can't tip it on its side. Whats a two year old know about whats nice. I thought it was verrry nice. You need to educate that kid. You know your in a good bar when it has chicken wire. Reminds me of my days in the Navy. The good old days. When I did'nt have to work or worry about makin the house payment. When gas was a buck. 1980 __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 04-12-2011 at 01:44 PM.

04-12-2011, 10:59 PM	#237
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: Daverods 52 In 1980 I was still swimmin around looking for a out. But I do remember gas being less then a buck about 15 years ago. __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

04-12-2011, 11:34 PM	#238
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: Daverods 52 If I ever get around to my 55, I will have to reread this and see how it's done. __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker"

04-12-2011, 11:56 PM	#239
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods 52 I really have no idea. I just post pictures and do what people tell me to do. Where's my bags!!! Got some stock 15" rims today now I need some tires. __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 04-12-2011 at 11:59 PM.

04-13-2011, 12:10 AM	#241
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods 52 I'm thinking about giving my parts washer an facelift. Attached Images __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it"

04-13-2011, 03:46 PM	#242
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: Daverods 52 You perv, but that's what I like about you.... __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT*



Register or Log In To remove these advertisements.

04-13-2011, 04:18 PM	#243
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods 52 I'm not to sure if I like the first two but the last one for sure. Ya I think I'll make it lioke the last one. oh the guy in the brown truck just drove by. __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it"

04-19-2011, 01:11 AM	#244
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: Daverods 52 you got that link system yet? __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

04-19-2011, 11:21 PM	#245
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods 52 Gave up waiting for my bags thought I would put my cab on and do my radiator stuff. When you use the s10 frame the radiator hits the gear box so you have to mod the bracket that holds it and use a different radiator. Not sure which radiator I'm going to use? Also had to trim my inner fenders to clear some stuff. Not sure if I cut them enough. I guess I'll find out when I get my bags on. Figured out stock s10 rim don't fit with my spindles for some reason. I guess I need more of an offset. Good enough for now they just don't go on all the way. Attached Images __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 04-20-2011 at 09:47 AM.

04-20-2011, 08:38 PM	#246
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods 52 http://cgi.ebay.com/209612-19-X-22-A...-/110414176704 I found this radiator. Its the right size but it says engine oil cooler. Could this also be used as a trans'mission cooler? Attached Images __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 04-20-2011 at 10:59 PM.

04-20-2011, 10:14 PM	#247
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: Daverods 52 Yes you can. That's how mine was hooked up in my 64. __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

04-20-2011, 11:00 PM	#248
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods 52 That's good I was sick of looking. Guess ill keep looking its got to be 22 by 19 not 19 by 22.Dumb as. Found this one 40 cheaper and it's 22x19. Attached Images __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 04-20-2011 at 11:15 PM.

04-20-2011, 11:03 PM	#249
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: Daverods 52 still no 2 link? I've been messing with mine. I got my bungs welded in and was taping out the threads. __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

04-20-2011, 11:19 PM	#250
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods 52 ekstensive aka "brothers" They said I could have it cheap not fast. I should have had my bags by now though. I guess they are going to ship it all together. Not as if I don't have stuff to work on. Need to get my engine so I can see how to mount it. I'm thinking I'll be cutting my floor boards. The Iron Duke. Least it has a name, maybe someday it will have a thread. __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 04-20-2011 at 11:24 PM.

Register or Log In To remove these advertisements.