LT1 Burbs 65 Stock SW Build - Page 10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

LT1 Burb · 12-04-2015, 09:03 PM

Quote:

Originally Posted by pimpston65

i have a an extra correct twin ear AC RC13# rad cap if you need one...

Yes, how muchie

LT1 Burb · 12-04-2015, 09:30 PM

Quote:

Originally Posted by clemdaddy

thats really nice...

thx

LT1 Burb · 12-04-2015, 09:32 PM

Quote:

Originally Posted by likaroc13

x2! Builds like these sometimes make me want mine to be just as "perfect." I admire the thought that goes into making everything as accurate as possible.

Always wanted to redo my suburban because of the detail things but this is easier.

LT1 Burb · 12-04-2015, 09:32 PM

Quote:

Originally Posted by bj383ss

Looks Fantastic! I like the body color over the undercoating. Stealing that idea.

The best part is they can be bolted on and don't have to come off again, and it looks good.

pimpston65 · 12-05-2015, 04:02 AM

Quote:

Originally Posted by LT1 Burb

Yes, how muchie

free silly...

LT1 Burb · 12-05-2015, 10:31 AM

Don't be a bonehead like me and check to make sure your fender extensions or cowls, whatever they are called, are not the same side. I got my original Harrison rad recored also.

Bomp · 12-05-2015, 12:12 PM

Quote:

Originally Posted by LT1 Burb

Don't be a bonehead like me and check to make sure your fender extensions or cowls, whatever they are called, are not the same side. I got my original Harrison rad recored also.

You're trying to make it twice as nice. lol

Hope those new bed sides are up to spec.

Looking really great.

LT1 Burb · 12-06-2015, 10:56 AM

Cleaning up some odds and sods, went to put the driveshaft in but found it was 1" to long. I bought it from a member on here but I guess it was never installed. I also had to weld up some holes on the inner fender that had been drilled in to move the voltage regulator. Fenders and grille surround should be installed for the last time. I am going to build a better more permanent paint booth in my garage so that I can get this thing painted.

sampsmit000 · 03-24-2016, 02:24 PM

Very nice build

pimpston65 · 03-24-2016, 02:38 PM

Quote:

Originally Posted by LT1 Burb

Cleaning up some odds and sods, went to put the driveshaft in but found it was 1" to long. I bought it from a member on here but I guess it was never installed. I also had to weld up some holes on the inner fender that had been drilled in to move the voltage regulator. Fenders and grille surround should be installed for the last time. I am going to build a better more permanent paint booth in my garage so that I can get this thing painted.

guess ima need to dig that rad cap out!!!

LT1 Burb · 03-28-2016, 10:46 AM

My bedsides showed up from FredsTruckParts and I sanded them down and worked on them. They were pretty decent and much better then the 4 I have spent over 1500.00 on.

LT1 Burb · 03-28-2016, 10:49 AM

I then put the bed together and marked out the trim holes and drilled all of them.

LT1 Burb · 03-28-2016, 10:54 AM

I probably put 8 coats of 2k on these sides and now at 600 with wax degreaser they really shine. I spent hours with paper wrapped around items as small as a pencil trying to get into hard to sand spaces, hopefully it shows when color is on.

LT1 Burb · 03-28-2016, 11:01 AM

I am in the middle of hood surgery, the sandblasted hood I had stored inside for 2 years was junked and the old hood I had outside for 2 years was used. The sandblasted one was heavily pitted from what I don't know and it had a large in-dent in it, but I needed the inner structure out of it. I ordered a new lower panel so got back to drilling spot welds. I used this time to POR15 the inner structure so I will never have to worry about it, also ground of the original paint on the next known bad spots but found no rust.

LT1 Burb · 03-28-2016, 11:08 AM

New panel installed.

65 C20 · 03-28-2016, 11:50 AM

Looks like it is coming along fine.
Great work as always.
I bet you can't wait for the sanding to be done with.

sampsmit000 · 03-28-2016, 12:43 PM

Nice work

62stepside longbox · 03-28-2016, 12:44 PM

Good job on the hood panel

pimpston65 · 03-28-2016, 12:47 PM

Your build sucks, can you tell im jealous cuz mine is still in pieces? great work sir!!!

LT1 Burb · 03-28-2016, 08:23 PM

Had to swap garages last weekend to do maintenance on the kids cars, I booted the wife's car out.

LT1 Burb · 03-28-2016, 08:26 PM

Thanks guys, sanding and bodywork sucks. Did get my seat recovered and my front bumper and guards rechromed.

LT1 Burb · 03-28-2016, 08:27 PM

In between sanding I have been doing other things like rebuilding my evaporator.

likaroc13 · 03-28-2016, 10:26 PM

Nice progress! Been keeping up with you on Facebook as well.

Bomp · 03-29-2016, 01:00 PM

Great Job. Top quality work bar none.
Will you make it to PIR?

pimpston65 · 03-29-2016, 01:41 PM

Pm your shipping info, i got a little somethin for ya!!!

12-05-2015, 10:31 AM	#231
LT1 Burb Registered User Join Date: Sep 2010 Location: Winchester Oregon, formerly Vancouver BC Posts: 2,949	Re: LT1 Burbs 65 Stock SW Build Don't be a bonehead like me and check to make sure your fender extensions or cowls, whatever they are called, are not the same side. I got my original Harrison rad recored also. Attached Images

12-06-2015, 10:56 AM	#233
LT1 Burb Registered User Join Date: Sep 2010 Location: Winchester Oregon, formerly Vancouver BC Posts: 2,949	Re: LT1 Burbs 65 Stock SW Build Cleaning up some odds and sods, went to put the driveshaft in but found it was 1" to long. I bought it from a member on here but I guess it was never installed. I also had to weld up some holes on the inner fender that had been drilled in to move the voltage regulator. Fenders and grille surround should be installed for the last time. I am going to build a better more permanent paint booth in my garage so that I can get this thing painted. Attached Images

03-24-2016, 02:24 PM	#234
sampsmit000 Registered User Join Date: Dec 2015 Location: Lehi,Utah Posts: 213	Re: LT1 Burbs 65 Stock SW Build Very nice build __________________ 1964 Chevy Factory K10 Short Bed Mitchell Sampson

03-28-2016, 10:46 AM	#236
LT1 Burb Registered User Join Date: Sep 2010 Location: Winchester Oregon, formerly Vancouver BC Posts: 2,949	Re: LT1 Burbs 65 Stock SW Build My bedsides showed up from FredsTruckParts and I sanded them down and worked on them. They were pretty decent and much better then the 4 I have spent over 1500.00 on. Attached Images

03-28-2016, 10:49 AM	#237
LT1 Burb Registered User Join Date: Sep 2010 Location: Winchester Oregon, formerly Vancouver BC Posts: 2,949	Re: LT1 Burbs 65 Stock SW Build I then put the bed together and marked out the trim holes and drilled all of them. Attached Images

03-28-2016, 10:54 AM	#238
LT1 Burb Registered User Join Date: Sep 2010 Location: Winchester Oregon, formerly Vancouver BC Posts: 2,949	Re: LT1 Burbs 65 Stock SW Build I probably put 8 coats of 2k on these sides and now at 600 with wax degreaser they really shine. I spent hours with paper wrapped around items as small as a pencil trying to get into hard to sand spaces, hopefully it shows when color is on. Attached Images

03-28-2016, 11:01 AM	#239
LT1 Burb Registered User Join Date: Sep 2010 Location: Winchester Oregon, formerly Vancouver BC Posts: 2,949	Re: LT1 Burbs 65 Stock SW Build I am in the middle of hood surgery, the sandblasted hood I had stored inside for 2 years was junked and the old hood I had outside for 2 years was used. The sandblasted one was heavily pitted from what I don't know and it had a large in-dent in it, but I needed the inner structure out of it. I ordered a new lower panel so got back to drilling spot welds. I used this time to POR15 the inner structure so I will never have to worry about it, also ground of the original paint on the next known bad spots but found no rust. Attached Images

03-28-2016, 11:08 AM	#240
LT1 Burb Registered User Join Date: Sep 2010 Location: Winchester Oregon, formerly Vancouver BC Posts: 2,949	Re: LT1 Burbs 65 Stock SW Build New panel installed. Attached Images

03-28-2016, 11:50 AM	#241
65 C20 Registered User Join Date: Nov 2013 Location: Comox BC Posts: 337	Re: LT1 Burbs 65 Stock SW Build Looks like it is coming along fine. Great work as always. I bet you can't wait for the sanding to be done with.

03-28-2016, 12:43 PM	#242
sampsmit000 Registered User Join Date: Dec 2015 Location: Lehi,Utah Posts: 213	Re: LT1 Burbs 65 Stock SW Build Nice work __________________ 1964 Chevy Factory K10 Short Bed Mitchell Sampson

03-28-2016, 12:44 PM	#243
62stepside longbox Registered User Join Date: Aug 2015 Location: Kelowna, B.C, Canada Posts: 1,747	Re: LT1 Burbs 65 Stock SW Build Good job on the hood panel __________________ Nik...................____ 62 lwb c10 step-side 261 5 spd .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ my build thread. Sending unit solution

03-28-2016, 12:47 PM	#244
pimpston65 Registered User Join Date: Aug 2013 Location: corktown,mi. Posts: 5,194	Re: LT1 Burbs 65 Stock SW Build Your build sucks, can you tell im jealous cuz mine is still in pieces? great work sir!!!

03-28-2016, 08:23 PM	#245
LT1 Burb Registered User Join Date: Sep 2010 Location: Winchester Oregon, formerly Vancouver BC Posts: 2,949	Re: LT1 Burbs 65 Stock SW Build Had to swap garages last weekend to do maintenance on the kids cars, I booted the wife's car out. Attached Images

03-28-2016, 08:26 PM	#246
LT1 Burb Registered User Join Date: Sep 2010 Location: Winchester Oregon, formerly Vancouver BC Posts: 2,949	Re: LT1 Burbs 65 Stock SW Build Thanks guys, sanding and bodywork sucks. Did get my seat recovered and my front bumper and guards rechromed. Attached Images

03-28-2016, 08:27 PM	#247
LT1 Burb Registered User Join Date: Sep 2010 Location: Winchester Oregon, formerly Vancouver BC Posts: 2,949	Re: LT1 Burbs 65 Stock SW Build In between sanding I have been doing other things like rebuilding my evaporator. Attached Images



Register or Log In To remove these advertisements.

03-28-2016, 10:26 PM	#248
likaroc13 Rollin' Old Skool Join Date: Jun 2007 Location: Hattiesburg, MS Posts: 5,371	Re: LT1 Burbs 65 Stock SW Build Nice progress! Been keeping up with you on Facebook as well. __________________ _____________________________________________ Phillip My Build threads: 1966 Chevy C-10 "Black Betty" shortbed, fleetside, BBW, 327 V8/ Powerglide (under construction) http://67-72chevytrucks.com/vboard/s...ighlight=betty 1997 Chevy Tahoe, 2dr/2wd, mild custom (Daily driver) http://67-72chevytrucks.com/vboard/s...d.php?t=601142 Pics: '66 C-10 https://flic.kr/s/aHsjHWD4h9 '97 Tahoe https://flic.kr/s/aHsjGZ7wKP '93 C-1500 https://flic.kr/s/aHskxdpdnQ '88 S-10 Blazer https://flic.kr/s/aHsjYGx4Md Previous Rides: 1993 Chevy S-10 ext. cab, 4.3L, 4/5 drop (Sold) 1993 Chevy C-1500 short/step Retro-Rod (Sold) 1988 S-10 Blazer 2dr/2wd mild custom (Sold)

03-29-2016, 01:00 PM	#249
Bomp Registered User Join Date: Apr 2011 Location: . Posts: 3,104	Re: LT1 Burbs 65 Stock SW Build Great Job. Top quality work bar none. Will you make it to PIR?

03-29-2016, 01:41 PM	#250
pimpston65 Registered User Join Date: Aug 2013 Location: corktown,mi. Posts: 5,194	Re: LT1 Burbs 65 Stock SW Build Pm your shipping info, i got a little somethin for ya!!! Attached Images

Register or Log In To remove these advertisements.