OR Parting out 72 GMC K20 4x4 350-TH350 - Page 10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

liftlawssuck · 09-27-2014, 08:18 PM

What kind of condition is it in? Not all rust is it? A pic would help if it's not too much trouble. Thanks, Brian

BigDaddyV · 09-27-2014, 08:44 PM

I got the piece I need. Thank you sir. Sorry for the delay.

**tll74** · 09-28-2014, 11:01 AM

Quote:

Originally Posted by liftlawssuck

What kind of condition is it in? Not all rust is it? A pic would help if it's not too much trouble. Thanks, Brian

I can post a pic tomorrow. No rust at all. It is a very nice part. I have several of them. Thanks, Tom

**tll74** · 09-30-2014, 01:26 AM

Quote:

Originally Posted by liftlawssuck

What kind of condition is it in? Not all rust is it? A pic would help if it's not too much trouble. Thanks, Brian

Pics of the pulley. Thanks, Tom

liftlawssuck · 09-30-2014, 07:25 PM

I'll take the pulley. PM sent.

outlawnino · 09-30-2014, 08:46 PM

Any front lower or upper arms?

**70CHEVYBB** · 09-30-2014, 10:32 PM

I will take the rag joint. pm sent

**tll74** · 10-01-2014, 01:41 AM

Quote:

Originally Posted by outlawnino

Any front lower or upper arms?

Sure, I have all the options. I need to know year and 1/2t or 3/4t.

Quote:

Originally Posted by 70CHEVYBB

I will take the rag joint. pm sent

I don't see that I have priced it. It would be 25.00 plus 5.00 shipping for a very nice one.

Quote:

Originally Posted by liftlawssuck

I'll take the pulley. PM sent.

PM returned

Thanks, Tom

teeitup · 10-23-2014, 08:10 PM

Thanks Tom

gehrts · 11-04-2014, 09:10 PM

Do you still have the transfer case adapter for a Turbo 350 to a NP205? If so price and shipping to 50562. Thanks Mike

lucky71gmc · 11-04-2014, 10:54 PM

Don't know why this old thread came up, looking for a rear cross member, front spring/core support mount Left or Drivers side , 4X4 AT tunnel Cover and
4 wheel front bumper braces for a GMC bumper right and left.
Do you have any of the parts left? My left frame rail has been cracked and welded in front of the steering box the front spring hanger and radiator core mount have been beat on. Don't know if I could find a piece of frame with the attached front spring hanger. I'm assuming the 1/2 frames were the same as the K25 frames. Thanks Br.

**lawest** · 11-05-2014, 01:29 PM

Quote:

Originally Posted by tll74

I have some GMC hood emblems 30.00 shipped. No eyebrows separate from a grill at this time. Thanks, Tom

71 GMC Grille complete? Pics please if available, thanks

68Bowtie4x4 · 11-05-2014, 08:24 PM

I'll take the non a/c chrome heater controls needs center lever I will replace it 45.00 - if you are replacing it with another factory lever and knob.

Let me know ASAP.

Thanks.

**TBONE1964** · 11-10-2014, 02:12 AM

Hello all,

I was asked by Tom (tll74) to let everyone know that he will be available to respond to request after the 18th. He is away on a hunting trip currently.

Thank you,
Tom

engairuph · 11-11-2014, 08:40 AM

By any chance do you still have the np205?

1972larry · 11-16-2014, 06:32 AM

I'm interested in the motor mounts that bolt to the frame how much shipped to 65774

**tll74** · 11-20-2014, 02:40 AM

Back from my annual elk hunting trip and catching up.

Quote:

Originally Posted by gehrts

Do you still have the transfer case adapter for a Turbo 350 to a NP205? If so price and shipping to 50562. Thanks Mike

Yes, I do. 140.00 shipped.

Quote:

Originally Posted by lucky71gmc

Don't know why this old thread came up, looking for a rear cross member, front spring/core support mount Left or Drivers side , 4X4 AT tunnel Cover and
4 wheel front bumper braces for a GMC bumper right and left.
Do you have any of the parts left? My left frame rail has been cracked and welded in front of the steering box the front spring hanger and radiator core mount have been beat on. Don't know if I could find a piece of frame with the attached front spring hanger. I'm assuming the 1/2 frames were the same as the K25 frames. Thanks Br.

Which rear cross member? Yes on the core support/spring mount 35.00. No on the tunnel cover. Yes on the bumper braces 20.00 each. Nothing on the frame rail with mounts. All plus shipping.

Quote:

Originally Posted by lawest

71 GMC Grille complete? Pics please if available, thanks

I have a very nice grill that has been rechromed and a original. If still interested LMK.

Quote:

Originally Posted by 68Bowtie4x4

I'll take the non a/c chrome heater controls needs center lever I will replace it 45.00 - if you are replacing it with another factory lever and knob.

Let me know ASAP.

Thanks.

Yes with a oem lever and knob. If still needing it please send me a PM.

Quote:

Originally Posted by engairuph

By any chance do you still have the np205?

Yes, 125.00 plus shipping.

Quote:

Originally Posted by 1972larry

I'm interested in the motor mounts that bolt to the frame how much shipped to 65774

I only have the mounts with the cross member. 75.00 plus shipping.

Thanks, Tom

c20pickup · 11-20-2014, 03:36 PM

how much for the th350 adpater/coupler and the np205 as a package?

engairuph · 11-20-2014, 07:49 PM

How much with shipping 39503 business.
Thanks

**tll74** · 11-21-2014, 02:13 AM

Quote:

Originally Posted by c20pickup

how much for the th350 adpater/coupler and the np205 as a package?

250.00 plus shipping

Quote:

Originally Posted by engairuph

How much with shipping 39503 business.
Thanks

I'll get you shipping cost on a T-case only.

I have three of these NP205 combo's so I have both of you covered.
Thanks, Tom

doo142 · 11-21-2014, 08:51 AM

I need frame cross members( from rear of cab to rear of frame), cab mounts, shock mounts, brake line holders. What do you have left? Any frame rail cuts available? Thanks

**tll74** · 11-23-2014, 01:32 PM

Quote:

Originally Posted by doo142

I need frame cross members( from rear of cab to rear of frame), cab mounts, shock mounts, brake line holders. What do you have left? Any frame rail cuts available? Thanks

4x4 correct? On the 4x4's I do not have the cross member just forward of the axle assy pulled out. I have it but still on trucks and I don't sell that one till I part out the truck because I have to cut the frame in half to get it out. I have the rest of the parts pulled. What frame rail cuts do you need? 150.00 for the rest of your list plus shipping. I would be about a month out on the forward cross member and it cost 85.00.
Thanks, Tom

67chevy4x4c · 11-23-2014, 06:35 PM

How much for all the ebrake parts shipped to Bartley wva 24813? And do you the ind cluster an how much .

doo142 · 11-23-2014, 07:15 PM

Quote:

Originally Posted by tll74

4x4 correct? On the 4x4's I do not have the cross member just forward of the axle assy pulled out. I have it but still on trucks and I don't sell that one till I part out the truck because I have to cut the frame in half to get it out. I have the rest of the parts pulled. What frame rail cuts do you need? 150.00 for the rest of your list plus shipping. I would be about a month out on the forward cross member and it cost 85.00.
Thanks, Tom

Thanks Tom , I'm going to keep trying to find a good frame. This one isn't worth putting much in too

**tll74** · 11-24-2014, 12:56 AM

Quote:

Originally Posted by 67chevy4x4c

How much for all the ebrake parts shipped to Bartley wva 24813? And do you the ind cluster an how much .

I sold this one (e-brake cables, support links, bracket, coulpers and spring. 45.00) I just tore down another 72 K20 that may have it. Is this what you need?

Quote:

Originally Posted by doo142

Thanks Tom , I'm going to keep trying to find a good frame. This one isn't worth putting much in too

No problem...to bad your so far away. I have some good frame too.

Thanks, Tom

09-27-2014, 08:18 PM	#226
liftlawssuck Registered User Join Date: Mar 2011 Location: MA Posts: 353	Re: Parting out 72 GMC K20 4x4 350-TH350 What kind of condition is it in? Not all rust is it? A pic would help if it's not too much trouble. Thanks, Brian

09-27-2014, 08:44 PM	#227
BigDaddyV Registered User Join Date: Mar 2013 Location: Grand Island, Ne. Posts: 1,110	Re: Parting out 72 GMC K20 4x4 350-TH350 I got the piece I need. Thank you sir. Sorry for the delay. __________________ *J. Vess, 6'6", Gearhead, Welder, Fabricator, Nutcase* 1955 Chevy Stepside "Dudley" My daily http://www.67-72chevytrucks.com/vboa...d.php?t=760288 1972 Chevy C10, Project "Chevro~Layed out" Nether Storm Build Thread http://67-72chevytrucks.com/vboard/s...23#post6007523

09-30-2014, 07:25 PM	#230
liftlawssuck Registered User Join Date: Mar 2011 Location: MA Posts: 353	Re: Parting out 72 GMC K20 4x4 350-TH350 I'll take the pulley. PM sent.

09-30-2014, 08:46 PM	#231
outlawnino Registered User Join Date: Sep 2014 Location: ruidoso downs nm Posts: 1	Re: Parting out 72 GMC K20 4x4 350-TH350 Any front lower or upper arms?

09-30-2014, 10:32 PM	#232
70CHEVYBB Senior Member Join Date: Feb 2012 Location: chillicothe, illinois Posts: 690	Re: Parting out 72 GMC K20 4x4 350-TH350 I will take the rag joint. pm sent

10-23-2014, 08:10 PM	#234
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting out 72 GMC K20 4x4 350-TH350 Thanks Tom __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-04-2014, 09:10 PM	#235
gehrts Registered User Join Date: Aug 2012 Location: Mallard, Iowa Posts: 136	Re: Parting out 72 GMC K20 4x4 350-TH350 Do you still have the transfer case adapter for a Turbo 350 to a NP205? If so price and shipping to 50562. Thanks Mike

11-04-2014, 10:54 PM	#236
lucky71gmc Registered User Join Date: Jan 2013 Location: Salt Lake City Utah Posts: 19	Re: Parting out 72 GMC K20 4x4 350-TH350 Don't know why this old thread came up, looking for a rear cross member, front spring/core support mount Left or Drivers side , 4X4 AT tunnel Cover and 4 wheel front bumper braces for a GMC bumper right and left. Do you have any of the parts left? My left frame rail has been cracked and welded in front of the steering box the front spring hanger and radiator core mount have been beat on. Don't know if I could find a piece of frame with the attached front spring hanger. I'm assuming the 1/2 frames were the same as the K25 frames. Thanks Br.

11-05-2014, 08:24 PM	#238
68Bowtie4x4 Registered User Join Date: Oct 2003 Location: Athena, Oregon Posts: 167	Re: Parting out 72 GMC K20 4x4 350-TH350 I'll take the non a/c chrome heater controls needs center lever I will replace it 45.00 - if you are replacing it with another factory lever and knob. Let me know ASAP. Thanks. __________________ 72 Chevy Cheyenne K10 4x4 LWB, 4" lift kit, 350/350/NP205, rebuild in progress.

11-10-2014, 02:12 AM	#239
TBONE1964 Cluster King Join Date: Nov 2012 Location: Junction City, OR Posts: 5,262	Re: Parting out 72 GMC K20 4x4 350-TH350 Hello all, I was asked by Tom (tll74) to let everyone know that he will be available to respond to request after the 18th. He is away on a hunting trip currently. Thank you, Tom __________________ Contact me on all of your gauge cluster needs. I specialize in restoration, repair and parts sales for 67-72 Chevy and GMC trucks. email me at tbonegarris@yahoo.com I am also a dealer for Counterpart for gauge cluster parts only. Also see my facebook page, CG&C

11-11-2014, 08:40 AM	#240
engairuph Registered User Join Date: Oct 2014 Location: D'Iberville, MS Posts: 447	Re: Parting out 72 GMC K20 4x4 350-TH350 By any chance do you still have the np205?

11-16-2014, 06:32 AM	#241
1972larry Registered User Join Date: Jan 2014 Location: weaubleau mo Posts: 166	Re: Parting out 72 GMC K20 4x4 350-TH350 I'm interested in the motor mounts that bolt to the frame how much shipped to 65774

11-20-2014, 03:36 PM	#243
c20pickup Registered User Join Date: Apr 2013 Location: Brighton, WI Posts: 504	Re: Parting out 72 GMC K20 4x4 350-TH350 how much for the th350 adpater/coupler and the np205 as a package?

11-20-2014, 07:49 PM	#244
engairuph Registered User Join Date: Oct 2014 Location: D'Iberville, MS Posts: 447	Re: Parting out 72 GMC K20 4x4 350-TH350 How much with shipping 39503 business. Thanks __________________ Ralph L. Jasper 69 4x4 Suburban PTO winch(NAVY) 13 GMC Ext cab 12 Ford Fusion SE(wife) MAI Interior shop

11-21-2014, 08:51 AM	#246
doo142 Registered User Join Date: Jan 2013 Location: Bristol,In. Posts: 1,118	Re: Parting out 72 GMC K20 4x4 350-TH350 I need frame cross members( from rear of cab to rear of frame), cab mounts, shock mounts, brake line holders. What do you have left? Any frame rail cuts available? Thanks



Register or Log In To remove these advertisements.

11-23-2014, 06:35 PM	#248
67chevy4x4c Registered User Join Date: Jan 2012 Location: bartley w va Posts: 191	Re: Parting out 72 GMC K20 4x4 350-TH350 How much for all the ebrake parts shipped to Bartley wva 24813? And do you the ind cluster an how much .

Register or Log In To remove these advertisements.