![]() |
|
![]() |
#1 |
Registered User
Join Date: Nov 2006
Location: Music City, U.S.A.
Posts: 638
|
Re: What did you do to your truck today?
Had mine in for a little minor plastic surgery. And by plastic, I mean sheet metal. Finally had the bed sides worked out at the back from where the old wraparound farmer bumper caved it in, and new front fender halves thanks to the old owner glued a patch panel over the rust. I'm going to have to figure out how to paint it to look more-or-less original now. Eeek! This is the first really major work I've ever had done to this truck in all the years I owned it. I was always scared to do it, and finally found a guy that I thought did a pretty good job.
![]() Now I'm on a serious search to find some brackets to make my dual spotlights mount up right. Suggestions are certainly welcome! Last edited by Revoh; 03-26-2011 at 12:38 AM. |
![]() |
![]() |
#2 |
Still Truckless!
Join Date: Jul 2007
Location: Valrico, Florida
Posts: 3,166
|
Re: What did you do to your truck today?
ripped out old carpet and bolted the seat down and tightened some of the bell housing bolts
__________________
~James ![]() ![]() 2009 Hyundai Sonata<~~Wife's sedanomatic 1997 Nissan Pickup Father-in-law's tonka toy I am forced to drive ![]() ![]() ![]() ![]() |
![]() |
![]() |
#3 |
Senior Enthusiast
Join Date: Feb 2007
Location: Spokane Valley, WA
Posts: 8,356
|
Re: What did you do to your truck today?
You may want to take a look at the following thread for the details of the job, and check with Bob at Accessoryland. He actually had a couple of outside and inside brackets available a few months ago.
http://67-72chevytrucks.com/vboard/s...d.php?t=401449 The outside brackets are essential to the install. If the inside brackets are unavailable, the standard clamp type will work just fine as shown in the thread above. His website use to come up on a Google search but I'm not finding it now. I find two phone numbers listed: 563.556.5482 and 319.556.5482. (Perhaps they had a recent area code split). It's a mom and pop outfit so he's a little slow to respond sometimes, but has always come through for me. I believe he is the only antique parts dealer with open access to the Unity warehouse and inventory. |
![]() |
![]() |
#4 |
Registered User
Join Date: Nov 2006
Location: Music City, U.S.A.
Posts: 638
|
Re: What did you do to your truck today?
Thanks! I called the guy, and he seemed pretty helpful. He's supposed to call me back later this week with the 4-11.
|
![]() |
![]() |
#5 |
Registered User
Join Date: Sep 2010
Location: Tulsa, Oklahoma
Posts: 1,925
|
Re: What did you do to your truck today?
Well the Right front fender on my gmc was toast, so we cut two fenders in half and used the good parts from each to make one good one....saved $250.00 and for rookies it turned out ok....let me know what you think.
http://kieth.smugmug.com/Trucks/66-G...29249108_8cu3c after you enter the gallery just click on next in the upper middle of the screen, the pictures jump to the next page before you see the final result. ![]() Last edited by kieth; 03-26-2011 at 03:49 PM. |
![]() |
![]() |
#6 |
Registered User
Join Date: Nov 2008
Location: Lacombe, LA
Posts: 2,772
|
Re: What did you do to your truck today?
Nuttin' wrong with that!
__________________
http://s1299.photobucket.com/user/jb...23904108567829 Last edited by jbgroby; 03-26-2011 at 04:30 PM. |
![]() |
![]() |
#7 |
Registered User
Join Date: Nov 2008
Location: Lacombe, LA
Posts: 2,772
|
Re: What did you do to your truck today?
Stopped by the painters today and got some quick shots of the doors that are getting close to paint.
__________________
http://s1299.photobucket.com/user/jb...23904108567829 |
![]() |
![]() |
#8 |
Registered User
Join Date: Jan 2007
Location: Madera, California
Posts: 291
|
Re: What did you do to your truck today?
jbgroby is there a way to fix the flat wiring plate behind the GMC speedometer and other gages?
|
![]() |
![]() |
#9 |
Registered User
Join Date: Nov 2008
Location: Lacombe, LA
Posts: 2,772
|
Re: What did you do to your truck today?
Yes, Because no one will see it you can resolder or put jumpers then a clear coat to seal the copper conduit. DO you need a plug/socket I have two spare that I will not be using.
__________________
http://s1299.photobucket.com/user/jb...23904108567829 Last edited by jbgroby; 03-26-2011 at 09:15 PM. |
![]() |
![]() |
#10 |
Registered User
Join Date: Feb 2011
Location: North, AL
Posts: 135
|
Re: What did you do to your truck today?
Pulled the engine and front end out of my truck. Found out the reason my turbo 350 stopped shifting. The rubber vaccum line got against the exhaust and melted in two! So, now I have a good tranny along with the motor. Pulling the Engine, Transmission, and entire front suspension only took 3 hrs. I couldn't believe it wen that fast.
|
![]() |
![]() |
#11 |
Custom Builder
![]() Join Date: Jun 2003
Location: Carlsbad, California
Posts: 908
|
Re: What did you do to your truck today?
Well I finally found a good Big Window Cab for my 1966 Factory 4WD.
The Cab has been setting down in El Cajon, CA since 2003 and hasnt been registered since 1993. It is a 1964 Big Window C30 with Factory Gauges, Heater Delete and Radio Delete with all the original parts still in place. We are going to pull all the rest apart and remove the body for Media Blasting this next week. Once back from the Media Blasting we will do any needed metal work before it gets sealed in DP90. This is the truck I am doing 1966 K20 Factory 4WD that I am adding 1 1/4 Ton D60 Front Axle and 1 ton Van 14 Bolt Rear Axle. ![]() This is the Big Window Cab I am going to start with. I stripped the interior today, she came apart real easy. She was left in Yellow Primer for 8 years in a guys back yard. I wish I could have found her 8 years ago as she would have been perfect. She is real straight and almost completely rust free other then the small spots on the floors from setting so long without a back window. ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
__________________
1932 Chevy Roadster Car and Pick-Up - http://67-72chevytrucks.com/vboard/s...d.php?t=465709 1966 K20 Factory 4X4 - http://67-72chevytrucks.com/vboard/s...d.php?t=455484 (Sold) 1972 K5 Blazer (Sold) - http://67-72chevytrucks.com/vboard/s...ad.php?t=87530 2007 TrailBlazer SS - http://67-72chevytrucks.com/vboard/s...34#post4706534 |
![]() |
![]() |
#12 |
Registered User
Join Date: Mar 2009
Location: Daphne, Al
Posts: 1,120
|
Re: What did you do to your truck today?
Changed out my 1 1/2 inch dropped springs and replaced them with 2 inch dropped springs. Back when the front sheetmetal was still on it did not sit the way I wanted it to. So now it is lowered 4 1/2 inches in front instead of 4 inches. This is also the first big job my son helped me with. I hel the spring in place and let him operate the jack. Good day all around.
__________________
1965 c-10 swb 1997 c-1500 extended cab 2004 tahoe 1993 mustang gt BUILD THREAD:http://67-72chevytrucks.com/vboard/s...d.php?t=336653 |
![]() |
![]() |
#13 |
Hell yeah!!!
Join Date: Aug 2010
Location: canyon country Ca.
Posts: 264
|
Re: What did you do to your truck today?
i refit and sealed my tonneau cover, now it's ready for some tuck and roll.
__________________
Stock is good but custom is the sh*t! |
![]() |
![]() |
#14 |
Registered User
Join Date: Nov 2008
Location: Houston TX
Posts: 362
|
Re: What did you do to your truck today?
well not today but just finished up over the past couple weeks in time for a parade tomorrow and cruise in tonight.
new seatbelts, kickpanels,carpet, and got my seat reupholstered
__________________
The price of cool aint cheap. |
![]() |
![]() |
#15 |
Registered User
Join Date: Nov 2008
Location: Houston TX
Posts: 362
|
Re: What did you do to your truck today?
got a new fuel gauge from the truck shop, but the back plate was a different shape, behind the dash it didnt fit good so i changed the back plate off my old one. wonder if anybody else had this problem.....looks 100% better and works like a champ now. next project is to finish the oak bed.
__________________
The price of cool aint cheap. |
![]() |
![]() |
#16 |
Registered User
Join Date: Dec 2010
Location: Venice, Ca.
Posts: 314
|
Re: What did you do to your truck today?
[quote=greg65;4580053]Changed out my 1 1/2 inch dropped springs and replaced them with 2 inch dropped springs. Back when the front sheetmetal was still on it did not sit the way I wanted it to. So now it is lowered 4 1/2 inches in front instead of 4 inches. This is also the first big job my son helped me with. I hel the spring in place and let him operate the jack. Good day all around.[/quot
Ooooooooooooooooops. I did something wrong. Last edited by Blue Heeler; 04-03-2011 at 11:09 AM. |
![]() |
![]() |
#17 |
Registered User
Join Date: Oct 2005
Location: oklahoma
Posts: 663
|
Re: What did you do to your truck today?
roughed out new gauge panel - 1/8" masonite base, plan to cover it with the same tan leather I'll use for door panels later, probably repaint the bezel a satin black
|
![]() |
![]() |
#18 |
Registered User
Join Date: Mar 2010
Location: riverside ca
Posts: 152
|
Re: What did you do to your truck today?
the t5 got a custom shifter....
|
![]() |
![]() |
#19 |
Senior Enthusiast
Join Date: Feb 2007
Location: Spokane Valley, WA
Posts: 8,356
|
Re: What did you do to your truck today?
It’s great when you can involve your kids. My oldest son started in the garage early in life, passing wrenches or just hanging out. By the time he was 15 he had become such a dependable apprentice I’d have him button up the bottom of my engines and never needed to double check his work.
|
![]() |
![]() |
#20 |
Registered User
Join Date: May 2010
Location: Galesburg, Kansas
Posts: 174
|
Re: What did you do to your truck today?
Finally got some paint down on cab interior 6 weeks ago:
|
![]() |
![]() |
#21 |
Registered User
Join Date: Oct 2005
Location: oklahoma
Posts: 663
|
Re: What did you do to your truck today?
fabbed up new brackets for center jump seat - funny part of the story: I set my pants on fire with the cutoff wheel on the grinder (note to idiot self: stand to the side when grinding)
|
![]() |
![]() |
#22 |
Registered User
Join Date: Jul 2009
Location: sacramento,ca
Posts: 338
|
Re: What did you do to your truck today?
posted mine on craigs list lastnight. at a low price so it will go away. i want to finish my plymouth...
|
![]() |
![]() |
#23 |
Registered User
Join Date: Feb 2011
Location: North, AL
Posts: 135
|
Re: What did you do to your truck today?
Picked up my 5.3\4L60e
Posted via Mobile Device |
![]() |
![]() |
#24 |
CLASSIX Truck Club
Join Date: Oct 2009
Location: Lodi Ca
Posts: 318
|
Re: What did you do to your truck today?
Removed the black rattle can paint of the hood and bed, found original patina and paint underneath.
Before ![]() After ![]() |
![]() |
![]() |
#25 |
65 Chevy
![]() Join Date: Nov 2009
Location: LODI Ca
Posts: 144
|
Re: What did you do to your truck today?
|
![]() |
![]() |
Bookmarks |
|
|