PO has me PO'd - Page 102 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**jaros44sr** · 04-22-2015, 07:02 PM

WIN_20150412_101533 by [url=https://www.flickr.com/people/131936700@N05/

ok, I think I figured out pics again, so I can keep you guys up to date

Big J · 04-23-2015, 03:53 PM

You can do it! Knock it out and get it on the road.

**jaros44sr** · 04-23-2015, 07:22 PM

Quote:

Originally Posted by Big J

You can do it! Knock it out and get it on the road.

Thanks for the encouragement J, i just keep thinking about the days, weeks, months you spent sanding your truck, only to sweep it up off the shop floor and reapply

Got the bilsteins today, one on, no pics since my battery is dead, soooo you ll just have to take my word for it today. I don t need 20 posts saying this thread is worthless, without pics.LOL

Big J · 04-23-2015, 10:29 PM

Quote:

Originally Posted by jaros44sr

Thanks for the encouragement J, i just keep thinking about the days, weeks, months you spent sanding your truck, only to sweep it up off the shop floor and reapply

HA! I had just about blocked all that from memory, lol. I'd like to put a new set of Bilsteins on my K5 and....... improve the steering and....... braking, lol. Brother I'm tellin ya now, when you get it done, its still not done,

. Oh the drama, it never ends.

**jaros44sr** · 04-24-2015, 09:38 AM

Gotta cut rivets for other shock mount, which means I have to take a section of bed floor up, might be awhile for an update, been to cold to leave shop door open for ventilation

WIN_20150424_093353

enaberif · 04-24-2015, 09:55 AM

Lots of good progress and hitting a wall always is rough.

Quick question regarding your hubs. The round retainer with the holes did you line up the hole with the nub on the first locking nut?

**jaros44sr** · 04-24-2015, 02:23 PM

Quote:

Originally Posted by enaberif

Lots of good progress and hitting a wall always is rough.

Quick question regarding your hubs. The round retainer with the holes did you line up the hole with the nub on the first locking nut?

Thanks.....and yes the slot in the hub has to line up, but you can flip ring 180 to get it to line up better on a tang, so you don t change your torque setting, ok did nt answer question let me think about, my head hurts. Just spent 5 hours on the phone with microsofts head geek

enaberif · 04-24-2015, 02:46 PM

Quote:

Originally Posted by jaros44sr

Thanks.....and yes the slot in the hub has to line up, but you can flip ring 180 to get it to line up better on a tang, so you don t change your torque setting, ok did nt answer question let me think about, my head hurts. Just spent 5 hours on the phone with microsofts head geek

If you look at this image http://thumbs2.ebaystatic.com/d/l225...BM3z1auHcQ.jpg you'll see on the left ring at 12 o'clock is a bump. This bump has to line up with a hole in the middle ring for it to be seated and locked properly.

**jaros44sr** · 04-25-2015, 05:44 AM

Quote:

Originally Posted by enaberif

If you look at this image http://thumbs2.ebaystatic.com/d/l225...BM3z1auHcQ.jpg you'll see on the left ring at 12 o'clock is a bump. This bump has to line up with a hole in the middle ring for it to be seated and locked properly.

Yes, i did that....

**jaros44sr** · 06-21-2015, 09:36 AM

OK, all the surgeries are done, vascular system was a bit of a problem, had to insert needle, then push a wire through needle to unblock it. Three stints later, and procedure is done. Seems I ve ignored it to long, the price I paid for being a Dad, ya still have to work come Monday morn, no matter what ails ya
100% blockage on right leg, 70% blockage on left leg

Now that I m all fixed up, I can get back to my build.... emergency brake cables first up

Chevyman63 · 06-21-2015, 09:41 AM

Quote:

Originally Posted by jaros44sr

OK, all the surgeries are done, vascular system was a bit of a problem, had to insert needle, then push a wire through needle to unblock it. Three stints later, and procedure is done. Seems I ve ignored it to long, the price I paid for being a Dad, ya still have to work come Monday morn, no matter what ails ya
100% blockage on right leg, 70% blockage on left leg

Now that I m all fixed up, I can get back to my build.... emergency brake cables first up

Wow...Glad things are all fixed up!!!!
And Happy Fathers day!!!
Posted via Mobile Device

**jaros44sr** · 06-21-2015, 07:14 PM

Quote:

Originally Posted by Chevyman63

Wow...Glad things are all fixed up!!!!
And Happy Fathers day!!!
Posted via Mobile Device

thanks bud, and happy fathers day to you too, hope all is well with the boys

swamp rat · 06-22-2015, 01:19 AM

Ditto, glad things are fixed up and looking up.

**jaros44sr** · 06-22-2015, 11:13 AM

Quote:

Originally Posted by swamp rat

Ditto, glad things are fixed up and looking up.

Thanks, enjoying your build, very entertaining. Just ordered two new drums from Rock Auto, we ll see how the quality is(raybestis). Now to find some quality high temp. Paint and figure out color. Not sure if color should standout or blend in thru the slots of my wheels... opinions? I ll let the masses rule

swamp rat · 06-23-2015, 03:59 AM

Black..

I think my thread would be more entertaining if i was to make some progress LOL!

**jaros44sr** · 06-23-2015, 10:32 AM

Quote:

Originally Posted by swamp rat

Black..

I think my thread would be more entertaining if i was to make some progress LOL!

progress is just a thought process, with your success and failures we learn what does and doesn t work, so by you attempting something, you speed up our builds by learning what not to do. Keep up the good work, I think youre doing fine on your build

thanks for watching, you guys keep ME going

**richard2717** · 06-23-2015, 11:03 AM

I would go with satin black on the drums.

**jaros44sr** · 06-23-2015, 06:24 PM

Quote:

Originally Posted by richard2717

I would go with satin black on the drums.

sorry Richard, I value your opinion, but I just bought Hi Temp off white.... we ll see what it looks like

good luck with your sales of the console cable

**richard2717** · 06-23-2015, 08:17 PM

Quote:

Originally Posted by jaros44sr

sorry Richard, I value your opinion, but I just bought Hi Temp off white.... we ll see what it looks like

good luck with your sales of the console cable

Oh I see you just want to draw attention to yourself

like that beauty wont draw enough drools as it is

**jaros44sr** · 06-24-2015, 07:26 AM

Quote:

Originally Posted by richard2717

Oh I see you just want to draw attention to yourself

like that beauty wont draw enough drools as it is

Richard, you re a funny guy, but you re right, I want to see clean brake drums, if I can pull it off

Can you explain you re avatar to me, its not Caitlin Jenner is it?

**richard2717** · 06-24-2015, 07:35 AM

Jim,
Its just a random pic I found but it may very well be it, her , him, whatever in a few years. One never knows.

I will be curious to see how the white turns out since I have the slots saved for the panel truck. I just figured since the inside edges of the holes on the slots were black (at least on mine) it would be the right way to go( for me anyway) but always open to different ideas. I guess I have seen to many of the rice burners lately with the brite colors showing through the wheels.

Richard

**jaros44sr** · 06-24-2015, 08:15 AM

Quote:

Originally Posted by richard2717

Jim,
Its just a random pic I found but it may very well be it, her , him, whatever in a few years. One never knows.

I will be curious to see how the white turns out since I have the slots saved for the panel truck. I just figured since the inside edges of the holes on the slots were black (at least on mine) it would be the right way to go( for me anyway) but always open to different ideas. I guess I have seen to many of the rice burners lately with the brite colors showing through the wheels.

Richard

yeah, I know what ya mean, red on brembos, porshe and Ferrari look good, but, this is neither, so I hope off white is enough accent

Big J · 06-25-2015, 08:25 AM

Quote:

Originally Posted by jaros44sr

OK, all the surgeries are done, vascular system was a bit of a problem, had to insert needle, then push a wire through needle to unblock it. Three stints later, and procedure is done. Seems I ve ignored it to long, the price I paid for being a Dad, ya still have to work come Monday morn, no matter what ails ya
100% blockage on right leg, 70% blockage on left leg

Now that I m all fixed up, I can get back to my build.... emergency brake cables first up

Amen! Glad your doing well. With all that extra flow you have now you should have it on the road in week or two

Seriously though, glad your up and going.

**jaros44sr** · 06-25-2015, 09:30 AM

Quote:

Originally Posted by Big J

Amen! Glad your doing well. With all that extra flow you have now you should have it on the road in week or two

Seriously though, glad your up and going.

Yeah, amazing, i can go up steps w/o stopping at first floor.
Thanks for checking in J

New brake drums arrived from rock auto, just waiting on paint

mtully79 · 06-25-2015, 06:17 PM

So glad to hear you're up and running again Jim, both you and the project

I'm looking forward to the progress, and curious to see how the off white on the drums turns out.

04-22-2015, 07:02 PM	#2526
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,700	Re: PO has me PO'd WIN_20150412_101533 by [url=https://www.flickr.com/people/131936700@N05/ ok, I think I figured out pics again, so I can keep you guys up to date __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

04-23-2015, 03:53 PM	#2527
Big J Its lookin' like a Blazer! Join Date: Aug 2003 Location: Gods Country, KY Posts: 1,773	Re: PO has me PO'd You can do it! Knock it out and get it on the road. __________________ BAZINGA! My Build

04-24-2015, 09:38 AM	#2530
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,700	Re: PO has me PO'd Gotta cut rivets for other shock mount, which means I have to take a section of bed floor up, might be awhile for an update, been to cold to leave shop door open for ventilation WIN_20150424_093353 __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim Last edited by jaros44sr; 04-24-2015 at 09:44 AM.

04-24-2015, 09:55 AM	#2531
enaberif Registered User Join Date: Jan 2009 Location: Calgary, AB Posts: 1,181	Re: PO has me PO'd Lots of good progress and hitting a wall always is rough. Quick question regarding your hubs. The round retainer with the holes did you line up the hole with the nub on the first locking nut?

06-21-2015, 09:36 AM	#2535
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,700	Re: PO has me PO'd OK, all the surgeries are done, vascular system was a bit of a problem, had to insert needle, then push a wire through needle to unblock it. Three stints later, and procedure is done. Seems I ve ignored it to long, the price I paid for being a Dad, ya still have to work come Monday morn, no matter what ails ya 100% blockage on right leg, 70% blockage on left leg Now that I m all fixed up, I can get back to my build.... emergency brake cables first up __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

06-22-2015, 01:19 AM	#2538
swamp rat Registered User Join Date: Oct 2007 Location: Spanaway Posts: 8,451	Re: PO has me PO'd Ditto, glad things are fixed up and looking up. __________________ Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's

06-23-2015, 03:59 AM	#2540
swamp rat Registered User Join Date: Oct 2007 Location: Spanaway Posts: 8,451	Re: PO has me PO'd Black.. I think my thread would be more entertaining if i was to make some progress LOL! __________________ Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's

06-23-2015, 11:03 AM	#2542
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,091	Re: PO has me PO'd I would go with satin black on the drums. __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

06-24-2015, 07:35 AM	#2546
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,091	Re: PO has me PO'd Jim, Its just a random pic I found but it may very well be it, her , him, whatever in a few years. One never knows. I will be curious to see how the white turns out since I have the slots saved for the panel truck. I just figured since the inside edges of the holes on the slots were black (at least on mine) it would be the right way to go( for me anyway) but always open to different ideas. I guess I have seen to many of the rice burners lately with the brite colors showing through the wheels. Richard __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

06-25-2015, 06:17 PM	#2550
mtully79 Registered User Join Date: Apr 2007 Location: Acworth, GA Posts: 441	Re: PO has me PO'd So glad to hear you're up and running again Jim, both you and the project I'm looking forward to the progress, and curious to see how the off white on the drums turns out.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.