Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!

[Palf70Step]

Me too.

[Grizz1963]

Originally Posted by flashed

Good Morning Rian ,still here with you .

Originally Posted by Palf70Step

Me too.

There you go guys.


While Photophukkit continues to be 100% ****e I am able to access my uploaded pics via mobile phone but not iPad. Really battle to understand that.

In the mean time some more photos for the records.

Slightly out of sequence set brake repair photos.


Brakes were never spectacular for starters.

So needed to be adressed.

Fronts looked fine after a few miles of purposefull heavy use but rears certainly made interesting noises.

Rusted up means penetrating oil. Lots of it



Aaaaaaahhhh......

Leaking cylinders and contaminated shoes.

New parts £60.00 for full rebuild kit.







Passenger side much better condition.

But replaced as matter of course.





Looking a bit sad



My neighbour Stuart whose vans I get to borrow occasionally for the price of diesel came to supervise and ultimately take over and do most of the clever reassembly.



Once the brakes and handbrake were all refitted and adjusted I had to try on the alloys.





It made me grin madly.

Yup......

Van makes my very happy.

And as always, Harley insists on inspecting and doing security control.

She helps a lot.

[Palf70Step]

AS mentioned in the other board, you can never have enough sheds!

[flashed]

Build it and it will be full too.

[Grizz1963]

Originally Posted by Palf70Step

AS mentioned in the other board, you can never have enough sheds!

Good morning Bill

Agreed, more sheds more stuff.

However. This shed will help clear the driveway and some stuff in the garage.

Originally Posted by flashed

Build it and it will be full too.

How true John.

Its kind of full already.



Had a couple of "objections" on other forums that guys did not want to click through to the actual shed thread but were interested in progress.

So I will do the usual copy and paste into this thread as its minimal effort for me. And nothing else is happening right now.

So.

Where do I start??

When I stripped the truck down, stuff like the complete exhaust system had to stay in one piece to serve as basic template when I make up the new 3" system with electric cutouts for the truck.
They have laid on the drive against a wall since then.
Loads of other "important stuff" has found its way there too.
Disability scooter chassis, beer kegs, biltong making cabinet, lawnmower, wheelbarrow and it goes on and on.

So the shed I had that was Nicolas potting shed would not take more stuff as it was already at capacity.

But it needed sorting and clearing as well as painting. Something used to do every year when I cleaned and painted the deck and pressure cleaned all the block paving and driveway.

So into action........

Clear away growth, empty shed, move onto lawn and paint 3 coats over three days. It s cheaper than replacing the shed and has worked on this shed since I had the Taunus Transit.




This side needed to drop and you can see how high it is compared to the shed.



What was there. Built up and filled over time to raise that section of garden.




Of course everything takes time and I had to go to Katy every second weekend to help her with various jobs in the garden at her place etc.

There were two Butlers sinks next to the shed that originally came from Jabbo, offered them back to him but he declined.
So CraigRK got one to use as a dogbath.

The other went to Katy's place as a smal garden for alpines.

Nice result once cleaned up and placed on some sleeper offcuts.



In the mean time Mickey next door rescued me a lighter weight patio set from his sons skip and I could give him the cast iron set on my deck for his garden.
The new set needed a clean up and one small repair.



Around the same time I bought a small bandsaw with 6 spare new blades off Facbook traders page while I was away at a three day training meeting in the Midlands. This would become impotant later. Like in yesterday.

Mate Paul fetched it and delivered it to my place one evening. Thanks Paul.



Around the same time I got two contractor lodgers move in for three weeks while they worked on maintenance at Damhead Creek powerstation.

So the BBQ got to work overtime.

This is really good as its part of the reward after a day digging holes or humping stuff about.



Keep in mind. This shed was really created to just be a rough rustic garden shed. With a dirt floor.

Of course that was not going to happen.

Another longterm good friend, Kevin who I helped a bit last year digging trenches and humping stuff when we built him a new patio, delivered a load of 500x500mm paving slabs that I stashed behind the garage for future use, months ago.......

Perfect ehhh.

So I started to carry them through from the rear to use some as a base for the garden shed and decided to lay some down on a very thin layer of sharp sand as floor to the shed.

Wooop Wooooopp !!

Free stuff.



A few weeks ago Kevin cleared out his garage and found some 3x3" 8 foot posts too that he offered me.
I also bought over 4 3" Metposts to use as corner posts from him for £30.00 delivered.
More about the delivery later.

[flashed]

You are always busy ,looks good too.

[Palf70Step]

I am tired just reading it, let alone watching you carry big rocks

[Grizz1963]

Originally Posted by flashed

You are always busy ,looks good too.

Originally Posted by Palf70Step

I am tired just reading it, let alone watching you carry big rocks

Getting this shed done and my garage cleared will allow me ti get on with the truck.

The shed and Prozac the van have helped get my MoJo back too.

[Grizz1963]

So once the existing shed was moved, the next job was to level out and clean up and place some of Kevin's old pavers on a very thin layer of sand..

There will also still be strips of wood under it when done, just to keep the floor as dry as possible.



Then of course I had to dismantle the existing garden after 6 years of carting stuff like stones, logs, ornaments and other plants in there.

Pile of rocks, to be redistributed later.



Measure and peg out the basic line where I wanted to get to with the new shed.

Using all sorts of rubble to create a dry wall behind which all the solid dug out will go.



Most nights after work I would get an hour or two in to dig a bit or move stuff about as I get home around 5-6pm if traffic and trains work well. So little by little it moved ahead.






One evening I had to pop in at my GP to collect my yearly antihistamine prescription.......

And had another Hallelujah moment.

In the garden of the practice was a large skip.

Yes, I cannot resist a skip.

And in the skip.......... MONEY !!!!!

Seriously, cash is all around if you keep your eyes open.

I saw this used garden gate.



Went inside and asked about it, before getting to my pills.

Of course you can have it if you want it.

Went home, fetched the Prozac Berlingo and also did a Google search to find the following.

£165.00 for the gate, excluding delivery or hardware. Online was free delivery. But regardless, not everyone would have that luxury.



Gate in the back, flat on the floor and tailgate strapped to it with some electric cord from the skip..... happy days.




Crazy Crazy world.

Free Money.

Who would say no to free cash??

I don't care how arrogant or up your own wallet you are, but if I tossed £165.00 on the floor in front of you, and said "Pick it up, it's yours" and you could go out to some pretentious restaurant and spend it on an overpriced meal, you probably would.

To me, these freebies translate into a new truer on my bike, a replacement circular saw etc.


So bit by bit the other parts of the garden where I had removed dead growth started to get filled with the soil dug out on the new site.
Carried there load by load.



More later, time for work now.

[realvc]

You're one hard working man. The van is working out like you wanted as a hauler of skip finds and other objects as needed for yard, home and truck updates.

[Grizz1963]

Originally Posted by realvc

You're one hard working man. The van is working out like you wanted as a hauler of skip finds and other objects as needed for yard, home and truck updates.

Hi Vince,

Thank you for posting up.

Of course I am watching your build all the way too.

The jobs happening right now are all part of the process of my head getting back to where it needs to be.

Hard working to me is more about just needing to keep busy.

Tonight I called a halt at 7pm and came in, not a common thing, but sometmes a rest is a good thing too.

Looking forward to getting the Shed project wrapped up, and then of course the shed filled, and garage emptied so that I can start on the truck again.

[Grizz1963]

More photos of the original progress on Prozac.

Base layer mocked up.



Fitted.



Then of course came the time to start working on the final look planned for the car.



Numbers custom cut for the Berlingo doors by Dennis.

I think he had as much fun as I did up to this point.





Miss Katy had come over to help as well, one needs to have an octopus like reach, and with the wind blowing one needed reflexes of a whippet to get them down right.



At this point, I actually loved the look.

But of course we were on a mission.

To create a dummy NASCAR support vehicle.

All tongue firmly in cheek.



We then had lunch while the wind pumped away.

The next session would be easier, but also challenging as I needed to get the look right, using real trucks to get the placement right.

More in a bit.

[Grizz1963]

Once all the grafix and stickers were stuck, it was out to the farm for some photos.









Top view



And of course the full length fabric sunroo, alwaysva joynto operate.



One of the other ballache jobs to do was to replace the broken brake bias valve spring.

At £22.00 it's a rip off but needed part.



Old vs New.



Of course to fit it you need pencil thin fingers and long too, bit like an alien, to get into the available space.



Took me an hour I guess, incl removing the spare wheel etc, and refitting.

Still, it's done.... one more box ticked for MOT time.



Also finally finished the rear end.




May be almost up to date on the van.

But more to go.

Thanks Photophukkit.

[ibrown50]

Read this again, that little van still makes me chuckle

[Grizz1963]

Originally Posted by ibrown50

Read this again, that little van still makes me chuckle

And that's what it's all about.

Well, that and doing all sorts of odd jobs Ian, along with getting me back on track.


I mentioned Kevin coming over.

Saturday of Easter weekend, early morning with his long VW van.

Loads of reclaimed timber, 3x3 posts from crates.

Also four met posts I bought off him for the same he paid as he was not going to use them.

Kevin had also agreed to come spend a few hours here, helping me break the back on this big dig out.

So we moved a lot of soil, some for top dressing the lawn, which ultimately I reused to raise the level under the pavers that were going into the shed.

Unfortunately I took no photos through the morning we worked as time was limited.

So once he went off to rejoin his family, I carried on levelling out the soil.

Preparation is as always one of the most important things to do.



Pavers and posts in place.





Saturday morning I was up by 05.00 and in the garden moving stuff around before 06.00 got to say I love summer.

I had some bricks to lay before going over to Katy's place. And to me time is precious, so get stuff done..... soonest.



I am using a solid lower level all the way around.

Kevin was also able to get me some railway sleepers that I am planning to use as the bottom of the shed, preventing the usual rot for a few years longer than regular pine.



Once I had laid the bricks, I watered down, but added some cement powder to the left over and then spread it with a yard broom just to get all the slabs the same colour.

Happy with the result too.



Weekends away from home frustrate me as I know how much work is still there, but as usual I guess there are times when doing nothing is the right thing.

So Katy and I ended up in Eastbourne.

Fish and chips, walk on the esplanade, ice cream and of course collecting holes rocks to string up under my tree.



Happy girl, exactly the opposite to not progressing with my build.

Still.....

[Grizz1963]

Insomnia sucks, as does snoring, especially when it is not you snoring..... cue 04.15

Followed by a cat in bed around the same time, looking for a cuddle, while purring loudly, so snores one side, and Harley the other, so cuppa tea, feed cat and surf web downstairs.

At 05.15 on cue the lodgers came in from their night shift, a pair of brothers, twins and at age 68 they look more like 58 and behave like men much younger than that. Geordies...... so great to have booked into Casa Grizz for three days, money to the mortgage again. Quiet as mice, they along with the previous two, have been an absolute pleasure to have around. Long may it continue.

Back to the shed build.

I have tried to just get a couple of hours in every night after work till dark, so averaged around 2 hrs a night.

Having bought a few boxes of "50mm and 100mm length quick screws, and some new driver bits the costs of the project were still silly low. I may do an inventory of costs later.

I have to say, the right tools and equipment makes a big difference on progress, and being a solo job, it helps for sure.



After that main framework was up, I decided to continue with the roof.

With all of Andy's planks, it also meant I had enough planks to create the roof, and save a further £66.00 that two sheets of decent ply would cost me, as I could not find used hoarding to buy anywhere.

Laid them out.



My last circular saw had eventually given up the ghost the night I did the framework for the roof and I completed the cuts with a handsaw and my trusty B&Q cheapest brand jigsaw, which I have managed to now drop on its face, bending its foot to the extent that corrective surgery was needed with a large garage ball pein hammer, accuracy now certainly not guaranteed, but it cuts.

So I popped into Screwfix for a second time to get more screws to replace the ones I stole off Mickeys work bench and bought a cheap circular saw. At £55.00 it was bought purely on spec, decent power, a soft start trigger and 190mm adjustable blade.



So on Wednesday evening after work I fitted the roof and also painted the rough cut timber inside of it.......

You may ask me why, and hopefully the reply will make sense.

Light reflection.



Keep in mind that the roof is getting felted in the end when you notice the gaps.



Who remembers the size of the footprint of the shed??

Remember the reasons for it being weird shaped?

Yes, my tree had a lotto dowith it, as did the free door I found in the GP surgery skip, and then of course the fact I am greedy and thought a couple of extra square feet in space sounded good.

I had not considered for a moment that all this would result in nothing being straight.

This included the roof.

BUGGGERRRRRRR...!!!!!!!!!!

Can you see the mistake?

Well, not a mistake, because any way you cut it, there would be an odd shaped wall or roof angle.



But by the time I realised it, it was too late and almost dark.

So I showered and went to bed, having shared a few pics with the likes of mates Martin, Kevin, CraigRK and Ta2Don and Dennis in Saint Louis.

Sadly, most of them suffer from varying degrees of OCD and had to state that it was just not right........ "You gotta fix it man"

I was working in London for the day on Thursday, so by the time I was on the 07.24 train a plan had hatched, and I could address it at least partly.

I walked from Charing Cross to St Thomas' Hospital, and again felt privileged for the random stuff I get to see.





Small shipping container coffee shop.



Your doctors transport?



So Thursday evening I went back to basics, and it made me smile once I had gotten on with it.

Back in a while to update.

[Grizz1963]

Friday came and went, uneventfully, except for a pair of lodgers, twins arriving to stay for a few days.

I had arranged with Kevin who had arranged for 15 railway sleepers or ties in American, to be delivered to his place to drive over at 06.45 on Saturday to help him load 5 plus two for my shed build.

When we had loaded them into his van, it seemed a great idea to cart the rest around his house by about 300 degrees, and carry them into his upper garden, remember the patio we built there last year? Same place. The old paving slabs were now being used in my shed build.

Once that was done we came back over to my place, Prozac in the lead...... filled with more wood from Kevin's place and glass.

I had already been to a local double glazing place earlier on, on my way to Kevin's place and picked up some old windows.





Five good and very solid sleepers unloaded and stacked.



Remember the plus 2

They were rotted, one was already used as a retainer, and this one will be used as a planter for alpine.



Then onto measure, cut, fit, repeat.

Getting all the sleepers cut and fitted to act as a foundation to the rest of the shed walls.



After a few hours, this was all that was left over.

The new circular saw was certainly earning its keep.



And a bucket load of sawdust and chippins and rebated bits.



I had also decided to use three courses against the soil wall Kevin and I had dug out over Easter weekend.

Happy with that result too.




Next up was coffee and digestives, the constant pace and few bad nights of little sleep plus the sheer weight of working the sleepers alone was catching up.

Still, it was progressing faster than anticipated.

More in a bit.

[Grizz1963]

So, to carry on with this sheds build report.

After the sleepers went in, I started to measure, cut, measure cut, measure cut and repeat, repeat repeat the front wall wood.

Then prepped the windows, which meant grinder out and remove the side opening mechanisms to leave just the glass and plastic frames.

Fitted in just to get perspective.





Sides in, frames screwed down through the inside of the frames.





Plan was to work with the older shed in place, something that can be done, but it seemed easier to drop the shed on its face.

Like this.



Then I realised that the one floor support was rotten out.



Quickly did some repairs and fitted a new support, then added some skids for it to sit on top of on the paving slabs.

Did not realise that I assembled this in 2007 when I still had the Taunus Transit.



The sides went up easier, and measure, cut fit was getting on good.



This brought me to the end of Saturday, knackered too.

Shut shop around 7pm and came in to shower etc.



Small window on the side is for light and also to see up to the house if one ever made or built anything in there.



Came in and relaxed with a drink and Katy cooked us dinner as the lodgers had gone to work.


Whatcha think so far ??

More in a while.

[Grizz1963]

Came home and spent some time sealing the gaps between the planks, sleepers etc with £24.00's worth of Silicone in white and dark brown. That's 8 tubes

Helped by Harley as is the norm.



After that I decided to make the cap for the roof where the two levels come together.
Screwing down the donor plank onto the two sleeper offcuts and hitting the saw at 45 degrees, it makes short work of getting on with stuff.



I also started to make the scalloped facia boards that need to go on once the roofing felt is fitted.





And that is about it for today.

Other than the fact that I found a slalom ski dumped by the roadside for a friends son to fit to his car as part of the stuff that goes on a roof rack, as is de rigeur for many youngsters in the car scene. Thread here: http://retrorides.proboards.com/thre...ges-estate-mk6




Always nice to find stuff about.

[Grizz1963]

Had a couple of visitors after work today.

Came in this Chariot......

Build thread here: http://retrorides.proboards.com/thre...ges-estate-mk6



And in the flesh I really like this car.

For a young man who has not even started to drive, he has a good vision of what he wants his car to look like.

Some of the additions are perfectly scene, but it is all subtle, and not overdone.

They also brought me a massively cool gift.

Two license plates and both rare in my book.

But the Cuba plate....... right outta the park !!

I have wanted to go to Cuba for years, so this is even more cool for that reason as it delivers.



Really good to see you Dan and George, and of course the little Rottweiler in the car ()

[Grizz1963]

Thanks Bill, John.

More done after work.






Mickeys side.







Facias need paint and fitting.

Later guys.

[Palf70Step]

The yard/shed project is moving along very nicely Rian. Yeah, every so often we need to break out and do what the lady wants. Our chores will ALWAYS be there.

[Grizz1963]

Originally Posted by Palf70Step

The yard/shed project is moving along very nicely Rian. Yeah, every so often we need to break out and do what the lady wants. Our chores will ALWAYS be there.

Some stuff just needs to be done.

Working solo unfortunately means progress is a bit slower.


Summer is here.

I may have mentioned it.

But that does not stop the rain from waiting to exactly the time you need to work to start opening up.

My one neighbour has a Toyota van that I have a spare set of keys to and 24/7 access and use to, as long as the diesel levels stay the same. Pretty good deal ehhh??

Anyways, last week I managed to get a day that was convenient for Andy who I bought Prozacs wheels from to pop over after work in the evening, but the Toyota was unavailable, plus the wood I was collecting for the shed build mostly was 2.4 meter lengths, so Toyota would not work.
So Stuart said take the Citroen van, long wheelbase, high roof......

Of course on the way there it started to rain, escalating while we were loading.

What a great van to drive, it really shunts.



Photos need to be taken.

Andy thankfully helped, so it went quite fast.



I suspect he was happy for the wood to leave his property after languishing in a corner for years.
He had planned on building a shed from these recycled 1 inch planks, but he ended up buying a large built shed and having it installed as workshop.



Loaded.

Deceptively large interior on the van, and full 8 foot plus flooor.



Headed home and was back home by 7pm

Reversed down my drive, mirrors tucked in and actually had to weave the van around the concrete fence posts as it would not go straight through.


Down to the bottom of the garden to unload and create even more of a hoard pile.



Unpacking on my own, the keen of eye amongst you will see if you look carefully....... Imhad a helper. Can you see her yet?

Yup...... HARLEY.




Some more of the loose planks on the other side, and the upright posts were some of what Kevin had brought over at Easter.

And of course the pile of stuff behind it, part of the reason I am building this shed.

The £40.00 caravan/shed also filled with "stuff"

I do pity the person who has to sort out my estate.



Once unloaded I really did worry about getting the van out again, it was a very tight fit coming in, and getting out is more difficult in my book.

Remembered to stop and take a pic of the gap.

The Citroen is certainly wider than the Sprinter vans I have reversed down there, and the car trailer and Teardrop previously.

Still, made it out and returned the van to Stuart.

Cost formdiese, well what I put in for the 30 mile trip was £30.00 so wood still a bargain, and Andy threw in some left over roofing felt, you know, to cover that last 18 inches you do not want to go buy a whole new roll for.


Photo is slightly confusing, but you can see the gap down the side of the van.



Other than the short pieces, these planks are attached to each other in 3 or 4 plank strips with pallet nails, hit in from both sides at angles, so not fun to dismantle.



When unpacked I thought I would just measure up and mock up the roof frame to see what I had to work with.

Of course the tools came out and I ended up adding a bit more to the frame.




More later on further progress.


It's also weekend...... well, after work today.

[flashed]

I think the shed looks fine ,I would leave it alone .

[Grizz1963]

Originally Posted by flashed

I think the shed looks fine ,I would leave it alone .

Oooopps.....!!

So all day I walked around with the ideas spinning around in my head.

Odd curved roof ??

Or

Wall with two distinctly different heights?

Got home, did some admin, then out to the garden.

Simple solution really.......




Closer up.



So I decided to raise the roof and change the shape of the wall.

Much easier on my OCD.

There......

Much better





Next up, start making up the walls, rear wall first.



Two piles of wood became one.

Good result for after hours working.



So there you go.

Roof sorted, I could sleep a bit better.

More later for those of you following this build process.