Post Your Craigslist Finds Part 2

[Wikid61]

https://orangecounty.craigslist.org/cto/7566298224.html

[Wikid61]

https://orangecounty.craigslist.org/cto/7566328990.html

[Wikid61]

https://losangeles.craigslist.org/ws...566156240.html

[Wikid61]

https://orangecounty.craigslist.org/cto/7566604510.html

[Wikid61]

https://albuquerque.craigslist.org/cto/7566271451.html

[Wikid61]

https://texoma.craigslist.org/cto/7566562705.html

[Wikid61]

https://ocala.craigslist.org/cto/d/i...566675889.html

[Wikid61]

https://washingtondc.craigslist.org/...566515819.html

[Wikid61]

https://washingtondc.craigslist.org/...560964426.html 1972 Chevy C10, lowered, 350 with mods, 3 speed on Column, bucket seats with center console. Owned by shop owner. Too much info to list, must see to appreciate. Calls preferred, so please email with your contact information and I'll give you a ring. $23,500 / or best offer. Serious inquiries only please - thank you.

[Wikid61]

https://norfolk.craigslist.org/cto/d...565653963.html

[Wikid61]

1968 C10 original patina truck. Brand new Wilwood disk brakes all around, Brand new CPP master brake cylinder, Brand new starter, Brand new drop spindles, Brand new cross member, Brand new lowering springs, Brand new C-notch, Brand new shocks, Brand new 20” American Racing torque thrust wheels and brand new tires. In-line 6 cylinder / 3 speed manual. All work done August 2022.
Please call. No emails. https://longisland.craigslist.org/ct...558037053.html

[Wikid61]

https://longisland.craigslist.org/ct...561350039.html

[Wikid61]

https://cleveland.craigslist.org/cto...563439514.html

[Wikid61]

1972 C10 Custom Deluxe Longbed

I bought the truck in 2017, it originated from down south. It was a highly optioned “Highlander” truck when it came from the factory. One of the previous owners was an engineer for MegaSquirt. He installed a 4.8 LS and 4l60E in it and the truck was the test mule for the MegaSquirt Ms3-Pro Engine Management System. The owner previous to me did the 3/5 drop on the truck. The rear end was pretty messed up so I got it rebuilt with a new posi unit with 3:73 gear. I went ahead and had Finish Line Transmission rebuild the 4L60E, they did the street performance upgrade and I had them also upgrade the stall to a 2000 stall speed. I put new tires on it also. The tires and rearend have less than 100 miles on them, and the trans hasn’t been installed yet. My plan was to upgrade the brakes, steering and suspension, and replace the original gas tank in the cab with a Boyds that’s installed on the frame under the bed. I bought much more new stuff for the truck, but it has sat in the garage for the last 3 or 4 years. I was going to have the cab corners and rockers installed but leave the paint alone. I’ve got a 70 RS Camaro pro touring car that I spend most of my free time driving. So, I’m putting the C10 up for sale as it sits, the engine and trans are not installed, but the steering linkage is. Can be winched up onto a trailer.

Drivetrain
4.8 LS out of a 2009 Chevy van; 59k miles; newer Camaro exhaust manifolds Jet-Hot Ceramic coated. I have a Trailblazer SS engine cover for it. Dual exhaust

4l60E trans; fresh rebuild by Finish Line Transmission, Street Performance, new 2000 stall

GM 12 bolt, new posi unit and 3:73 gears, Moser cover

Fuel and Engine management
MegaSquirt MS3-Pro engine management system
BoydWelding stainless tank with fuel pump and sending unit, under bed tank
New fuel line, Wix Filter, Russell fittings

Wheels and tires
Boss 20” rims, also have a stock set of nice GM 15x8 inch truck rims
BFG G-Force Sport Comp2 245/45/20 fronts, 275/40/20 rears, less than 100 miles

Brakes
New Wilwood booster, proportional valve, calipers, pads and steel braided flex line kit
New drilled and slotted rotors, new inline tube brake line

Suspension and Steering
All new Moog steering linkage components, CPP 7423 Front sway bar kit, POL tubular upper control arms, new Moog components for lower control arms
CPP 50014 steering box
New Belltech 4702 coil spring set, Belltech front and rear Street Performance shocks, POL front shock relocation kit

Body
Triplus cab corners, inner and outer rocker panels, new passenger inner fender
Cab mount kit, radiator support mounts, new fender and bumper fasteners
All new LED lighting and lenses, billet “8 LSX’ fender emblems, taillight trim, door handles, rear view mirrors

Interior
New OER carpet, new door panels, door and window rubber
Grant Steering wheel
New bench seat cover, Morris seat belts, new gas, brake and EB pedal covers
Dakota Digital ECD-100 Electronic cable drive

$12,000 no trades
Located near Harvard Illinois 60033 https://rockford.craigslist.org/cto/...566419927.html

[Wikid61]

https://scottsbluff.craigslist.org/cto/7566320002.html

[Wikid61]

https://denver.craigslist.org/cto/7563030583.html

[Wikid61]

https://denver.craigslist.org/cto/7561690808.html

[Wikid61]

https://denver.craigslist.org/cto/7559263131.html

[Wikid61]

https://boulder.craigslist.org/cto/7562525742.html

[HO455]

Nice upscale 72 Longhorn $13,750. Not mine. Looks to be a nice truck and the price seems fair. Hard to believe these days.


https://yakima.craigslist.org/cto/d/...573039544.html

1972 Chevrolet C20 Longhorn Cheyenne Super 2wd Pickup.
The Longhorn was produced from 1968-1972, frame and front of bed were extended 6 inches.
The truck was intended for the booming camper market and for the cattle industry in Texas.
With ONLY 3,328 examples of the Longhorn leaving the assembly line in 1972, the chances of you seeing one on the street 47 years later is rare. Many were used as work trucks and therefore didn’t survive many years. Owners that intended to work the trucks purchased them stripped out. Original buyers that wanted only the best Chevy had to offer, picked up fully loaded models. This rare ’72 Longhorn is just one such model!

Features include Factory Big Block 400 V8, Factory Air Cond., Power Steering and Brakes, Rebuilt Automatic Transmission, New Michelin Tires, New Wheels with Factory Stainless Hubcaps, New Flowmaster Exhaust, Factory AC Delco Radio, Chrome Bumpers, Chrome Grill, 8.5ft wooden bed, Tilt Wheel, New Olive Green Paint, Owner's Manual, and all the chrome and trim is there.

This rust free truck is 80% restored and just needs very little to be a $30K collector model.

* Needs - Tailgate and wiper cowling painted, seat reupholstered, carpet, door panels and interior handles installed, exterior trim installed...ALL PARTS ARE INCLUDED.

Please call (five zero nine) Nine Six One - 1588

[72c20customcamper]

Originally Posted by HO455

Nice upscale 72 Longhorn $13,750. Not mine. Looks to be a nice truck and the price seems fair. Hard to believe these days.


https://yakima.craigslist.org/cto/d/...573039544.html

1972 Chevrolet C20 Longhorn Cheyenne Super 2wd Pickup.
The Longhorn was produced from 1968-1972, frame and front of bed were extended 6 inches.
The truck was intended for the booming camper market and for the cattle industry in Texas.
With ONLY 3,328 examples of the Longhorn leaving the assembly line in 1972, the chances of you seeing one on the street 47 years later is rare. Many were used as work trucks and therefore didn’t survive many years. Owners that intended to work the trucks purchased them stripped out. Original buyers that wanted only the best Chevy had to offer, picked up fully loaded models. This rare ’72 Longhorn is just one such model!

Features include Factory Big Block 400 V8, Factory Air Cond., Power Steering and Brakes, Rebuilt Automatic Transmission, New Michelin Tires, New Wheels with Factory Stainless Hubcaps, New Flowmaster Exhaust, Factory AC Delco Radio, Chrome Bumpers, Chrome Grill, 8.5ft wooden bed, Tilt Wheel, New Olive Green Paint, Owner's Manual, and all the chrome and trim is there.

This rust free truck is 80% restored and just needs very little to be a $30K collector model.

* Needs - Tailgate and wiper cowling painted, seat reupholstered, carpet, door panels and interior handles installed, exterior trim installed...ALL PARTS ARE INCLUDED.

Please call (five zero nine) Nine Six One - 1588

Wish this one were closer .

[Sheepdip]

Originally Posted by 72c20customcamper

Wish this one were closer .

It's only a Southwest Flight away from being yours.

[Wikid61]

https://denver.craigslist.org/cto/7559452815.html

[Wikid61]

This is a 2nd owner truck, Never wrecked. I have owned it for over 30years. This is a one of a kind Monster. It has a Merlin IV Chevy 572 CI Race motor Balanced and Blue printed with a Dyno sheet measuring 748HP with a 4 barrel carburator, More like 850HP with the Pro Flo 4 intake on it. Comes with a hand held computer controller so you can set all the parameters of the intake. Lot of torque, From White Racing Motors in Tennessee. exact number is on the sheet. It is Fuel Injected with a massive Edelbrock Pro Flo 4 Intake on it with a 4 1/2" diameter intake. It has a Yukon Posi traction rear end, 17" billet polished Aluminum wheels with bead locks and Mickey Thompson Baja Tires on it and they were machined to take the original chevy hub caps, cool. It has front disc brakes. The wheels are rated for over 100ph. It has a balanced 4" Aluminum drive line. The transmission is a 4L80E with a shift kit and computer. It has a DANA 60 rear end. It has a Fuel Pump speed controller for keeping the fuel constant in hot weather. It has Evans antifreeze coolant in the motor for heat control. The C20 has the passenger side tool box with a rust free door and it locks. It has a white camper shell. I installed heavier front springs for the added weight and to keep it level. It has 4WD clearance under the truck. The truck looks totally stock.
I have all brand new top of the line choice Oak for the bed and the chrome runners and all the hardware to install. I have a complete package of insulation foam for inside the doors and floor. Brand new carpeting and new blue and black Houndstooth seat upholstery for the bench seat. I installed a extra rear gas tank that is 24gal along with the front tank which is 24 too I believe. I can send pics to serious buyers. I will post pics later. Think FARM TRUCK check out YouTube.
do NOT contact me with unsolicited services or offers https://fortcollins.craigslist.org/cto/7564945783.html

[Wikid61]

Clear Colorado title
350 ci sbc, Runs well, quiet top end and bottom end.
Edelbrock Street Master low profile single plane intake manifold
Edelbrock 1405 600cfm manual choke carburetor
Hei distributer
Long tube headers, true dual exhaust, glass pack style mufflers
Power brakes, power steering
SM 465 four speed
NP205 two speed transfer case
Dana 44 front axle (open) with lock out hubs and disk brakes
Gm 12 bolt rear axle (open) with drum brakes
4 inch suspension lift kit
15 x 10 inch steel wheels
33 12.50 15 tires (date code 2008)
Custom front and rear bumpers, and tubing grill built in our shop, all bolt on parts.
Good battery (2018)

Starts, runs, drives, and stops.
What i would call a great turn key "project"
Has a solid diamond plate steel bed floor
Doors bottoms are in good shape (picts)
205 and 465 checked and topped off with gear oil.
Fresh engine oil and filter 10/40
Carb has been cleaned and a new kit installed
Fuel tank inspected while installing the new sending unit, looks like new inside.
This is a solid truck, has a GMC tailgate and possible stepside bed on it
Discloser: has damage to drivers side rocker panel and common cab corner rust. (picts).
Will include patch panels for the cab corners and rocker panel with sale of truck (picts). https://westslope.craigslist.org/cto/7564000424.html