What did you do to your truck today? Chapter II - Page 104 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

4x4trucker · 01-03-2016, 01:07 AM

Looks are deceiving, but it is quite straight. I always wanted this K10 and she finally gave in and sold it to me. It will some day be a real looker.

I want to thank everyone on this site for a great job in helping everyone out with their problems. I will have many!

MikeB69C10 · 01-03-2016, 01:42 AM

Hood off, hinges off, hinges off to Willie's.

toolboxchev · 01-03-2016, 02:02 AM

New heater fan motor, VatoZone! 20 bucks. lifetime warranty!

Doing some wiring tomorrow, dam its fricken cold out.

XwalkerX · 01-03-2016, 05:07 AM

finally got the factory tach unit working thanks to a dakota digital sgi-8e

Synestran · 01-03-2016, 04:36 PM

Replaced my alternator this morning as it had finally decided to go out. Hopefully this will have solved my draining battery issue.

Econman · 01-04-2016, 05:14 PM

Dropped mine off for rust & metal repair before heading to media blaster. Getting blasted after the inner cowl and rockers come off, then primed..

88fordf150 · 01-04-2016, 06:14 PM

New pins, bronze bushings and powder coating for my door hinges.

Possmguts · 01-04-2016, 07:16 PM

Quote:

Originally Posted by 88fordf150

New pins, bronze bushings and powder coating for my door hinges.

I need to be doing this but I have to replace the uppers... the door stops are missing...

72c105speed · 01-04-2016, 07:24 PM

Econman do you have a build thread?

Trying to figure out where that rust is and how you go about fixing the windshield frame

Gonepostal · 01-04-2016, 07:35 PM

Found a real problem

88fordf150 · 01-04-2016, 07:37 PM

Quote:

Originally Posted by Possmguts

I need to be doing this but I have to replace the uppers... the door stops are missing...

Nope, they are on.

88fordf150 · 01-04-2016, 07:40 PM

Quote:

Originally Posted by Possmguts

I need to be doing this but I have to replace the uppers... the door stops are missing...

Oh, you meant yours are missing. Classic Parts sells a door stop rebuild kit.

Possmguts · 01-09-2016, 02:20 AM

Quote:

Originally Posted by 88fordf150

Oh, you meant yours are missing. Classic Parts sells a door stop rebuild kit.

Thanks, Ill look into it.. gotta be cheaper Im sure

74baggedbug · 01-05-2016, 02:59 PM

Added a usb charging port behind my seat so I can charge my phone if need be

73737373 · 01-05-2016, 05:15 PM

More cleaning....before and after. Seat is next project.

JMD · 01-07-2016, 09:18 PM

Got the cab sand blasted and dropped it off to get sealed. Dreading the bodywork already.

88fordf150 · 01-08-2016, 07:45 PM

Quote:

Originally Posted by JMD

Got the cab sand blasted and dropped it off to get sealed. Dreading the bodywork already.

I see your tags are on the passenger side pillar?? Mine are on the drivers side. Did the factory change the location?

Possmguts · 01-08-2016, 08:04 PM

Quote:

Originally Posted by 88fordf150

I see your tags are on the passenger side pillar?? Mine are on the drivers side. Did the factory change the location?

the pic is flipped lol

88fordf150 · 01-08-2016, 08:18 PM

Quote:

Originally Posted by Possmguts

the pic is flipped lol

After I posted I noticed it was a right hand steer. lol

Possmguts · 01-08-2016, 10:12 PM

Quote:

Originally Posted by 88fordf150

After I posted I noticed it was a right hand steer. lol

I was about to comment on it being right hand drive and then I saw the poster in the background lol

JMD · 01-09-2016, 12:58 AM

Quote:

Originally Posted by Possmguts

the pic is flipped lol

Just noticed that myself! I'm not sure why my phone did that...

Another set back on the new brake lines and rear disk swap. Tried to install the braided line on the rear axle only to find out the line runs directly into the leaf springs

colgad · 01-09-2016, 01:09 AM

Quote:

Originally Posted by JMD

Just noticed that myself! I'm not sure why my phone did that...

Another set back on the new brake lines and rear disk swap. Tried to install the braided line on the rear axle only to find out the line runs directly into the leaf springs

You just need a 90 adapter, all done!
http://www.ebay.com/itm/Fragola-4981...-/390612526505

In The Ten Ring · 01-08-2016, 07:51 PM

Quote:

Originally Posted by JMD

Got the cab sand blasted and dropped it off to get sealed. Dreading the bodywork already.

We should call our trucks "BOAT's" as in BUST OUT ANOTHER THOUSAND.

I received my newly polished headlight surrounds from the metal polisher today. Even my mom was impressed and she hates my truck! (Dad loved them though).

CST10 · 01-08-2016, 10:59 PM

I changed the blower fan motor, fan switch and the fan circuit switch behind the glovebox on ol Goldilocks today. Getting ready for a morning biscuit run.

tommy3horse · 01-09-2016, 02:12 PM

Hello, got the new Firestone Destination A/T 31x1050's installed...just in time for the first snow. It looks a lil high in back but I think that increases the cool factor..
Also, I have been gathering up all the brackets and clamps to install a factory sway bar, that too should increase the grins per gallon quest.

01-03-2016, 01:07 AM	#1
4x4trucker Registered User Join Date: Dec 2015 Location: goodyear, az. Posts: 3	Re: What did you do to your truck today? Chapter II Looks are deceiving, but it is quite straight. I always wanted this K10 and she finally gave in and sold it to me. It will some day be a real looker. I want to thank everyone on this site for a great job in helping everyone out with their problems. I will have many!

01-03-2016, 01:42 AM	#2
MikeB69C10 Registered User Join Date: Nov 2015 Location: Los Alamitos, Ca Posts: 55	Re: What did you do to your truck today? Chapter II Hood off, hinges off, hinges off to Willie's.

01-03-2016, 02:02 AM	#3
toolboxchev Registered User Join Date: Jul 2015 Location: 2nd left past the stump on a dirt road. Posts: 2,629	Re: What did you do to your truck today? Chapter II New heater fan motor, VatoZone! 20 bucks. lifetime warranty! Doing some wiring tomorrow, dam its fricken cold out.

01-03-2016, 05:07 AM	#4
XwalkerX Registered User Join Date: Sep 2012 Location: SoCal Posts: 529	Re: What did you do to your truck today? Chapter II finally got the factory tach unit working thanks to a dakota digital sgi-8e

01-03-2016, 04:36 PM	#5
Synestran Registered User Join Date: Nov 2015 Location: Oregon Posts: 88	Re: What did you do to your truck today? Chapter II Replaced my alternator this morning as it had finally decided to go out. Hopefully this will have solved my draining battery issue.

01-04-2016, 05:14 PM	#6
Econman Registered User Join Date: Feb 2011 Location: Knoxville, TN Posts: 362	Re: What did you do to your truck today? Chapter II Dropped mine off for rust & metal repair before heading to media blaster. Getting blasted after the inner cowl and rockers come off, then primed.. Attached Images Last edited by Econman; 01-04-2016 at 05:19 PM.

01-04-2016, 06:14 PM	#7
88fordf150 Registered User Join Date: Nov 2009 Location: Michigan Posts: 474	Re: What did you do to your truck today? Chapter II New pins, bronze bushings and powder coating for my door hinges. Attached Images __________________ Brad handshoe

01-04-2016, 07:24 PM	#9
72c105speed Registered User Join Date: Oct 2015 Location: Kentucky Posts: 172	Re: What did you do to your truck today? Chapter II Econman do you have a build thread? Trying to figure out where that rust is and how you go about fixing the windshield frame

01-04-2016, 07:35 PM	#10
Gonepostal Registered User Join Date: Jun 2012 Location: Mobile Al Posts: 103	Re: What did you do to your truck today? Chapter II Found a real problem Attached Images __________________ US Army Bomb Squad 83-96 There is no problem that a suitable amount of explosives cannot solve

01-05-2016, 02:59 PM	#14
74baggedbug Registered User Join Date: Oct 2011 Location: Houston tx Posts: 701	Re: What did you do to your truck today? Chapter II Added a usb charging port behind my seat so I can charge my phone if need be

01-05-2016, 05:15 PM	#15
73737373 Registered User Join Date: Sep 2005 Location: Oklahoma USA Posts: 1,000	Re: What did you do to your truck today? Chapter II More cleaning....before and after. Seat is next project. Attached Images

01-07-2016, 09:18 PM	#16
JMD Registered User Join Date: Jun 2013 Location: Grand Rapids Michigan Posts: 291	Re: What did you do to your truck today? Chapter II Got the cab sand blasted and dropped it off to get sealed. Dreading the bodywork already. Attached Images

01-08-2016, 10:59 PM	#24
CST10 Registered User Join Date: Sep 2013 Location: Gonzales, La Posts: 1,441	Re: What did you do to your truck today? Chapter II I changed the blower fan motor, fan switch and the fan circuit switch behind the glovebox on ol Goldilocks today. Getting ready for a morning biscuit run. __________________ MyToys: Goldilocks the "Ol School Survivor" 1968 C10, SWB Stepside, 08/15 TOTM, 250 CI 6 cylinder, 3 on the tree, 3.73 rear, 3/5 static drop, 23,500 original miles. Samson the 1970 CST10, LWB, 462Ci, Turbo 350 tranny, 3.08 rear gear, PB, PS, A/C, AM/FM, 2/4 Drop. Brutus the 1998 Camaro Z28, 33,500 original miles, LS1, 519 RWHP/497 RWTQ. Member of the Louisiana Classic Truck Club, LCTC Member of the Louisiana C10 Club Member of the Baton Rouge Drifters Car Club

01-09-2016, 02:12 PM	#25
tommy3horse Registered User Join Date: Feb 2015 Location: St. Clair, Missouri Posts: 124	Re: What did you do to your truck today? Chapter II Hello, got the new Firestone Destination A/T 31x1050's installed...just in time for the first snow. It looks a lil high in back but I think that increases the cool factor.. Also, I have been gathering up all the brackets and clamps to install a factory sway bar, that too should increase the grins per gallon quest. Attached Images __________________ 1972 GMC C1500 350/350 1965 Mustang 2+2 289 4spd, show-car 1965 Mustang Coupe 289 4spd, stoplight racer 1/2 dozen Wheelhorse Tractors



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.