What did you do to your truck today.The 3rd chapter - Page 106 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Already Gone** · 01-06-2022, 09:10 PM

Quote:

Originally Posted by Rich72C10

Each side had "4 clips". You pull the upper door seal down, put the clips in along the top horizontal door window frame. Then I mounted the vent into pace on the clips, which the window wing side of the shade goes in between the vertical window wing bar and felt runner seal. After getting the shade in all okay, I then popped back up the upper door seal in.

Bob's your uncle!

Thanks

**Steeveedee** · 01-06-2022, 11:47 PM

Drove it. That's a rare occurrence. I took a solid maple chest of drawers to "our" storage locker (which I really hate- it's stupid money spent, but we have no space. Truth to tell, that stuff could have been donated or put in the dump, and "we'd" be money ahead. But it isn't my stuff, and it's not my money.)

**Sheepdip** · 01-06-2022, 11:58 PM

Quote:

Originally Posted by Steeveedee

Drove it. That's a rare occurrence. I took a solid maple chest of drawers to "our" storage locker (which I really hate- it's stupid money spent, but we have no space. Truth to tell, that stuff could have been donated or put in the dump, and "we'd" be money ahead. But it isn't my stuff, and it's not my money.)

Lol...you sound a little flustered there Steeveedee. I feel for you as I'm married too!

77chris03 · 01-07-2022, 12:05 AM

bought buddy buckets today....

NoStopN · 01-07-2022, 11:33 AM

Quote:

Originally Posted by 77chris03

bought buddy buckets today....

I hope you didn't have to mortgage your house for them.

**Steeveedee** · 01-07-2022, 01:01 PM

Quote:

Originally Posted by Sheepdip

Lol...you sound a little flustered there Steeveedee. I feel for you as I'm married too!

A little. I keep telling my wife we need to start downsizing our possessions. Every time someone in out neighborhood moves, there's a 30 yard roll-off dumpster in front of their house! One neighbor had two delivered.

**Grumpy old man** · 01-08-2022, 01:06 PM

Quote:

Originally Posted by Steeveedee

A little. I keep telling my wife we need to start downsizing our possessions. Every time someone in out neighborhood moves, there's a 30 yard roll-off dumpster in front of their house! One neighbor had two delivered.

That's because the cost to rent a U-haul to Fl is so high it's cheaper to throw all their stuff away and just buy new stuff ,

**Steeveedee** · 01-08-2022, 07:53 PM

Quote:

Originally Posted by Grumpy old man

That's because the cost to rent a U-haul to Fl is so high it's cheaper to throw all their stuff away and just buy new stuff ,

So true.

Rich72C10 · 01-08-2022, 08:59 PM

Got my Blazer Courtesy Lights installed. I also took a road trip to Houston to pick up a Slider that I found on Craigslist for $150 bucks. From some forum searching it seems if the latch says "PRESTIGE" then its a factory/OEM Slider.

I have it all cleaned up, seal mounted and roped up. Next is cutting out a perfectly good sealed window and putting this guy in...

**pjmoreland** · 01-08-2022, 11:52 PM

Did some painting

ChevyGuyNC · 01-09-2022, 11:13 AM

Quote:

Originally Posted by Rich72C10

Got my Blazer Courtesy Lights installed. I also took a road trip to Houston to pick up a Slider that I found on Craigslist for $150 bucks. From some forum searching it seems if the latch says "PRESTIGE" then its a factory/OEM Slider.

I have it all cleaned up, seal mounted and roped up. Next is cutting out a perfectly good sealed window and putting this guy in...

Where'd you get the Blazer Courtesy Lights and how was the install? Were there empty mounting points/wiring?

They look really good

Rich72C10 · 01-09-2022, 11:24 AM

Quote:

Originally Posted by ChevyGuyNC

Where'd you get the Blazer Courtesy Lights and how was the install? Were there empty mounting points/wiring?

They look really good

See this thread :-)

Blazer courtesy lights
https://67-72chevytrucks.com/vboard/...d.php?t=829247

**Accelo** · 01-09-2022, 12:07 PM

I can see from the picture the Blazer lighting adds a modern warm look o truck. Nice Job.

Rich72C10 · 01-09-2022, 01:17 PM

Quote:

Originally Posted by Accelo

I can see from the picture the Blazer lighting adds a modern warm look o truck. Nice Job.

Yep, I really like it and it was a easy upgrade.

I started off with Sylvania 1003's which are 12.8v 12 watts (the photo) but then switched to Sylvania 89's which are 13v 7.5 watts.

Rich72C10 · 01-09-2022, 02:00 PM

I decided I needed a dancing girl in my life....

**Jiggers72-GMC** · 01-10-2022, 07:44 AM

Who doesn't like dancing girls huh, I like that radio as well, very nice Richard

**pjmoreland** · 01-11-2022, 06:27 PM

I know I post too much on this thread, but I can't help but share these photos. I stayed up late into the wee hours of the morning last night cleaning this '67 bellhousing so I could paint it with 2-part spray paint from Eastwood that I had left over from painting my engine. It was going to go bad unless I used it, and I didn't want to waste it.

Rich72C10 · 01-11-2022, 07:35 PM

i love engine parts being Orange! nice work!

**Ol Blue K20** · 01-12-2022, 08:11 AM

Came out nice, spent some time masking too.

**NewBayColony** · 01-12-2022, 09:40 AM

Quote:

Originally Posted by pjmoreland

I know I post too much on this thread, but I can't help but share these photos. I stayed up late into the wee hours of the morning last night cleaning this '67 bellhousing so I could paint it with 2-part spray paint from Eastwood that I had left over from painting my engine. It was going to go bad unless I used it, and I didn't want to waste it.

No wasted paint there! Came out nice!

**Jiggers72-GMC** · 01-12-2022, 09:40 AM

pjmoreland, Very nice n clean, well done, nobody thinks you post too much, bring it

BrentBTK · 01-14-2022, 09:56 AM

Finally got the adapter for the new steering wheel after installing a new Flaming River tilt column. I'm loving how it feels. Then I removed 2 leaf springs from each side as God only knows when the backordered lowering springs will arrive. That dropped the rear about 3 inches. I think it's pretty close to where it should end up when the new springs get here. Maybe about an inch high right now. Yesterday was the first time I drove her over speed bumps since the lowering. I was nervous as my exhaust sits below the frame, but she glided right over

Column and before and after lowering pics below.

Rich72C10 · 01-14-2022, 04:43 PM

I couldn't take not having my back window in anymore and waiting for various friends schedules to help me try and install my Houston Craigslist's (1984 era) factory like aluminum Sliding Window. So I paid a "come to your house" vehicle window installer. It must have been the easiest money they ever earned, as I had the full window already out and the gasket/SS Trim pre-installed on the slider window frame.

They were very nice local Kyle guys and they wanted to talk about my truck (a lot). They said they more often than not have to deal with rusty trucks and mine was a breeze! So overall, I feel good about supporting a local business. I still paid less than buying a new slider (the black pre-tinted ones) and that is with me driving to Houston and back.

Edit:
Added bonus - the tint that is on the Slider pretty much matches the new tint on my doors that I had put on late last year. It needs to be replaced but I don't need to do that any time soon!

Rich72C10 · 01-14-2022, 04:49 PM

Quote:

Originally Posted by BrentBTK

Finally got the adapter for the new steering wheel after installing a new Flaming River tilt column. I'm loving how it feels. Then I removed 2 leaf springs from each side as God only knows when the backordered lowering springs will arrive. That dropped the rear about 3 inches. I think it's pretty close to where it should end up when the new springs get here. Maybe about an inch high right now. Yesterday was the first time I drove her over speed bumps since the lowering. I was nervous as my exhaust sits below the frame, but she glided right over

Column and before and after lowering pics below.

Man, that lowering looks great, completely changes the truck's look. That chrome column is pretty too!

KW5413 · 01-14-2022, 05:40 PM

Dusted her off and drove her like I stole her today. 70 degrees in DFW today. Tomorrow will be high 30's at best with a constant 25 MPH wind and steady gusts 50-60 MPH. The windchill will be C. O. L. D. ....COLD

01-06-2022, 11:47 PM	#2627
Steeveedee Who Changed This? Join Date: Jan 2013 Location: Simi Valley, CA Posts: 10,578	Re: What did you do to your truck today.The 3rd chapter Drove it. That's a rare occurrence. I took a solid maple chest of drawers to "our" storage locker (which I really hate- it's stupid money spent, but we have no space. Truth to tell, that stuff could have been donated or put in the dump, and "we'd" be money ahead. But it isn't my stuff, and it's not my money.) __________________ ~Steven '70 Chevy 3/4T Longhorn CST 402/400/3.56 Custom Camper Simi Valley, CA

01-07-2022, 12:05 AM	#2629
77chris03 Registered User Join Date: Jun 2009 Location: CoNrOe Tx Posts: 1,343	Re: What did you do to your truck today.The 3rd chapter bought buddy buckets today.... __________________ 68 C10 Stepper #1- GONE 68 C10 Stepper #2 1977 Chevy Cheyenne...gone...was my first Chevy 04 Tahoe Z71, 04 Silverado 2500HD, 04 Sierra 2500HD 99 Sierra Stepside, 17 Denali HD, 84 K10 My 1st build-- http://67-72chevytrucks.com/vboard/s...d.php?t=379333 My 2nd build-- http://67-72chevytrucks.com/vboard/s...d.php?t=700310

01-08-2022, 08:59 PM	#2634
Rich72C10 Mr. Cheyenne Join Date: Jun 2020 Location: Kyle, Texas Posts: 1,687	Re: What did you do to your truck today.The 3rd chapter Got my Blazer Courtesy Lights installed. I also took a road trip to Houston to pick up a Slider that I found on Craigslist for $150 bucks. From some forum searching it seems if the latch says "PRESTIGE" then its a factory/OEM Slider. I have it all cleaned up, seal mounted and roped up. Next is cutting out a perfectly good sealed window and putting this guy in... Attached Images __________________ Richard *'72 Chevy C10 Cheyenne Super WHT/MED BRONZE/WHT SBC 350 \| TH350 \| LWB \| AC \| Buddy Seats Upgrades:** Tilt \| Front Sway Bar \| Radio \| Sliding Window \| Bed Spare w/Lock Bed Rails \| Full LEDs \| Courtesy Lights \| Tachometer \| Glovebox Lock & Light \| Head Light Relays \| *Upgraded Fully Super Trim

01-08-2022, 11:52 PM	#2635
pjmoreland Senior Member Join Date: Jan 2005 Location: CA Posts: 5,746	Re: What did you do to your truck today.The 3rd chapter Did some painting Attached Images

01-09-2022, 12:07 PM	#2638
Accelo Senior Member Join Date: Mar 2015 Location: washington Posts: 2,280	Re: What did you do to your truck today.The 3rd chapter I can see from the picture the Blazer lighting adds a modern warm look o truck. Nice Job.

01-09-2022, 02:00 PM	#2640
Rich72C10 Mr. Cheyenne Join Date: Jun 2020 Location: Kyle, Texas Posts: 1,687	Re: What did you do to your truck today.The 3rd chapter I decided I needed a dancing girl in my life.... Attached Images __________________ Richard *'72 Chevy C10 Cheyenne Super WHT/MED BRONZE/WHT SBC 350 \| TH350 \| LWB \| AC \| Buddy Seats Upgrades:** Tilt \| Front Sway Bar \| Radio \| Sliding Window \| Bed Spare w/Lock Bed Rails \| Full LEDs \| Courtesy Lights \| Tachometer \| Glovebox Lock & Light \| Head Light Relays \| *Upgraded Fully Super Trim

01-10-2022, 07:44 AM	#2641
Jiggers72-GMC Senior Member Join Date: Mar 2021 Location: up North Posts: 550	Re: What did you do to your truck today.The 3rd chapter Who doesn't like dancing girls huh, I like that radio as well, very nice Richard __________________ Gerry, North Bay Ontario 1971 Chevy K10 short stepper, 518 med green & white 1972 GMC C1500 long box, dark Brown, owned since 1977 1969 GMC C2500 manual

01-11-2022, 06:27 PM	#2642
pjmoreland Senior Member Join Date: Jan 2005 Location: CA Posts: 5,746	Re: What did you do to your truck today.The 3rd chapter I know I post too much on this thread, but I can't help but share these photos. I stayed up late into the wee hours of the morning last night cleaning this '67 bellhousing so I could paint it with 2-part spray paint from Eastwood that I had left over from painting my engine. It was going to go bad unless I used it, and I didn't want to waste it. Attached Images

01-11-2022, 07:35 PM	#2643
Rich72C10 Mr. Cheyenne Join Date: Jun 2020 Location: Kyle, Texas Posts: 1,687	Re: What did you do to your truck today.The 3rd chapter i love engine parts being Orange! nice work! __________________ Richard *'72 Chevy C10 Cheyenne Super WHT/MED BRONZE/WHT SBC 350 \| TH350 \| LWB \| AC \| Buddy Seats Upgrades:** Tilt \| Front Sway Bar \| Radio \| Sliding Window \| Bed Spare w/Lock Bed Rails \| Full LEDs \| Courtesy Lights \| Tachometer \| Glovebox Lock & Light \| Head Light Relays \| *Upgraded Fully Super Trim

01-12-2022, 08:11 AM	#2644
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 16,237	Re: What did you do to your truck today.The 3rd chapter Came out nice, spent some time masking too. __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man R.I.P. FleetsidePaul

01-12-2022, 09:40 AM	#2646
Jiggers72-GMC Senior Member Join Date: Mar 2021 Location: up North Posts: 550	Re: What did you do to your truck today.The 3rd chapter pjmoreland, Very nice n clean, well done, nobody thinks you post too much, bring it __________________ Gerry, North Bay Ontario 1971 Chevy K10 short stepper, 518 med green & white 1972 GMC C1500 long box, dark Brown, owned since 1977 1969 GMC C2500 manual Last edited by Jiggers72-GMC; 01-12-2022 at 10:04 AM.

01-14-2022, 09:56 AM	#2647
BrentBTK Registered User Join Date: Nov 2021 Location: Cumming, Ga Posts: 163	Re: What did you do to your truck today.The 3rd chapter Finally got the adapter for the new steering wheel after installing a new Flaming River tilt column. I'm loving how it feels. Then I removed 2 leaf springs from each side as God only knows when the backordered lowering springs will arrive. That dropped the rear about 3 inches. I think it's pretty close to where it should end up when the new springs get here. Maybe about an inch high right now. Yesterday was the first time I drove her over speed bumps since the lowering. I was nervous as my exhaust sits below the frame, but she glided right over Column and before and after lowering pics below. Attached Images

01-14-2022, 04:43 PM	#2648
Rich72C10 Mr. Cheyenne Join Date: Jun 2020 Location: Kyle, Texas Posts: 1,687	Re: What did you do to your truck today.The 3rd chapter I couldn't take not having my back window in anymore and waiting for various friends schedules to help me try and install my Houston Craigslist's (1984 era) factory like aluminum Sliding Window. So I paid a "come to your house" vehicle window installer. It must have been the easiest money they ever earned, as I had the full window already out and the gasket/SS Trim pre-installed on the slider window frame. They were very nice local Kyle guys and they wanted to talk about my truck (a lot). They said they more often than not have to deal with rusty trucks and mine was a breeze! So overall, I feel good about supporting a local business. I still paid less than buying a new slider (the black pre-tinted ones) and that is with me driving to Houston and back. Edit: Added bonus - the tint that is on the Slider pretty much matches the new tint on my doors that I had put on late last year. It needs to be replaced but I don't need to do that any time soon! __________________ Richard *'72 Chevy C10 Cheyenne Super WHT/MED BRONZE/WHT SBC 350 \| TH350 \| LWB \| AC \| Buddy Seats Upgrades:** Tilt \| Front Sway Bar \| Radio \| Sliding Window \| Bed Spare w/Lock Bed Rails \| Full LEDs \| Courtesy Lights \| Tachometer \| Glovebox Lock & Light \| Head Light Relays \| *Upgraded Fully Super Trim

01-14-2022, 05:40 PM	#2650
KW5413 Registered User Join Date: Jul 2021 Location: Rowlett, TX Posts: 493	Re: What did you do to your truck today.The 3rd chapter Dusted her off and drove her like I stole her today. 70 degrees in DFW today. Tomorrow will be high 30's at best with a constant 25 MPH wind and steady gusts 50-60 MPH. The windchill will be C. O. L. D. ....COLD



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.