What did you do with your truck today, Part 3 - Page 107 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

evilokc · 03-31-2019, 10:41 PM

tried to track down my coolant leak. I thought it was a hose clamp but it looks like my water pump has crapped out. its 17 years old so I guess I got my $35 out of it. im dealing with a bad radiator on my daily driver. basically everything I own is leaking coolant right now.
had a nice drive though.

MiraclePieCo · 04-01-2019, 02:13 AM

Quote:

Originally Posted by evilokc

tried to track down my coolant leak. I thought it was a hose clamp but it looks like my water pump has crapped out. its 17 years old so I guess I got my $35 out of it. im dealing with a bad radiator on my daily driver. basically everything I own is leaking coolant right now.
had a nice drive though.

Do you have pictures with the hood on?

**idbeast** · 04-02-2019, 07:38 AM

Quote:

Originally Posted by DransportGarage

Looking SUPER! That's really some inspiration to get the final assembly going!

Quote:

Originally Posted by svr

Very nice Idbeast, may the force continue to be with you.

Quote:

Originally Posted by Black_Sheep

Love the color combo!

Thanks everyone! Sorry for not getting back sooner, now I'm busy working on reassembly and wiring!

Jim W

jeffs56 · 04-02-2019, 04:29 PM

Nice truck idbeast what paint did you use for your dash

MARTINSR · 04-02-2019, 11:45 PM

Still working on my brothers dash. But I did get my heater box prepped for paint. Figured I would paint it with the paint and clear I am using on my brothers dash to get me some practice. I can't believe how out of it I am on painting, I used to do this for a living for goodness sakes!

Hope my practicing boxing to keep in touch (I boxed amateur for 9 years) so if I need it I can use it. Because if it's anything like this painting I won't be able to handle a 16 year old 90 pounder!

Brian

DransportGarage · 04-03-2019, 06:51 PM

Made the door panel board today, passenger side, out of 1/8" ABS. Boring.

Special thanks to "The Lucky Needle" on YouTube for his 5-part video on "Making Custom Door Panels". He has a pretty cool method of using clear plastic to transfer the required shape of the panel to the board.
https://www.youtube.com/watch?v=DulSVg0WRkc

EDIT: I did notice that, to see the entire door panel build on this YouTube channel, there is a fee of $39.95. Nothing wrong with that, but be prepared if you want to see the actual upholstery part.

MARTINSR · 04-03-2019, 11:43 PM

Quote:

Originally Posted by DransportGarage

Made the door panel board today, passenger side, out of 1/8" ABS. Boring.

Special thanks to "The Lucky Needle" on You Tube for his 5-part video on "Making Custom Door Panels". He has a pretty cool method of using clear plastic to transfer the required shape of the panel to the board.

Cool, I want to see that.

I got out there for my five minutes and put some paint on my heater. Not so much because I wanted to but I REALLY need to get more comfortable with the paint gun again so I can clear my brothers dash.

Brian

nvrdone · 04-04-2019, 09:20 AM

I picked up a set of HID headlights from a Jeep wrangler to replace my 7" seal beams. So last night I decided to install them. They went in easy with only a little trimming to the bucket. Then I took it for a test drive. Man are they bright!! Really makes a big difference in night driving.

DransportGarage · 04-04-2019, 10:35 AM

Quote:

Originally Posted by nvrdone

I picked up a set of HID headlights from a Jeep wrangler to replace my 7" seal beams. So last night I decided to install them. They went in easy with only a little trimming to the bucket. Then I took it for a test drive. Man are they bright!! Really makes a big difference in night driving.

Nice score on the HIDs!

Old Truck Man · 04-04-2019, 11:52 AM

We have too much stuff. So I have got my 82 wrecker up and running. And have been dragging out the 73 and newer square cab trucks and taking them apart. I have found Facebook Marketplace id a good venue to advertise and actually sell parts. I sold a rust free 86 cab to a guy in Missouri. Im in the process of stripping a 84 GMC that has a rust free 100% solid cab. I need to unhook the speedo cable and 4 cab to frame bolts and its ready to remove from the frame. Ive already sold some front crossmembers & suspension. and sold some rear ends. but we have plenty left. The 83 C20 has been earning its keep winchig stuff out of tight spots and dragging it within reach of my electric and air .

MiraclePieCo · 04-05-2019, 04:28 AM

Quote:

Originally Posted by nvrdone

I picked up a set of HID headlights from a Jeep wrangler to replace my 7" seal beams. So last night I decided to install them. They went in easy with only a little trimming to the bucket. Then I took it for a test drive. Man are they bright!! Really makes a big difference in night driving.

Do you have any pictures of the lights?

MARTINSR · 04-04-2019, 10:38 PM

Got the heater cleared tonight, I am feeling much better about clearing my brothers dash. It's so wild, I have sprayed thousands of gallons of paint. I did it for a living for goodness sakes, sprayed in body shops all over California and even other states doing demos and stuff. But they put the gun down for a few decades and WHAM I am as uncomfortable as hell. Just spraying this heater fired me up, it looks great, I am ready to do the dash now.

Brian

DransportGarage · 04-04-2019, 11:03 PM

Quote:

Originally Posted by MARTINSR

Got the heater cleared tonight, I am feeling much better about clearing my brothers dash. It's so wild, I have sprayed thousands of gallons of paint. I did it for a living for goodness sakes, sprayed in body shops all over California and even other states doing demos and stuff. But they put the gun down for a few decades and WHAM I am as uncomfortable as hell. Just spraying this heater fired me up, it looks great, I am ready to do the dash now.

Brian

Welcome to my world! Every time I pick up the gun it's like I don't know which end is up until the paint hits the floor. Then things just start to come back to me, like in a dream...

MARTINSR · 04-05-2019, 09:53 AM

Quote:

Originally Posted by DransportGarage

Welcome to my world! Every time I pick up the gun it's like I don't know which end is up until the paint hits the floor. Then things just start to come back to me, like in a dream...

Speaking of "paint hitting the floor". OMG I poured the black paint into the gun to shoot the dash and the needle wasn't going far enough in because of a little paint left from a previous use of the gun and the the paint was just pouring out of the nozzle onto the garage floor unable to stop it! Oh yeah, that was great!

Brian

NeoJuice · 04-05-2019, 12:24 PM

I found purchasing large blue tarps from the dollar store work really well and its cheap insurance. I've saved my garage floor many times with a tarp. There also easy to roll over with my floor creeper as well. Just a tip I thought I would share.

MiraclePieCo · 04-06-2019, 05:40 PM

I finished my window channel installation that got interrupted last week. Did the passenger side rollers, channels, sweeps, fuzzies and inside trim. Hard to see in the pics, but it looks nice and the windows work smoothly and quietly.

nvrdone · 04-05-2019, 09:19 AM

sorry - no pictures. I haven't figured how to post them on this site. if you pm me your phone # I could send them to you.

MARTINSR · 04-07-2019, 01:19 AM

Daamn Kcmarkd, that is a nice truck!

Brian

kcmarkd · 04-07-2019, 09:43 AM

Quote:

Originally Posted by MARTINSR

Daamn Kcmarkd, that is a nice truck!

Brian

Thanks Brian!

MARTINSR · 04-07-2019, 04:48 PM

Well, my brother dash is gone, I can go back to focusing on my truck!

I can't believe it, I finally have a Motorama Token that was my dad's! He was a Olds and Buick Salesman in the fifties all the way up to 1979 and I couldn't believe that he never mentioned ever going to a Motorama being we live across the bay from SF. Today my brother brought over a bunch of stuff of his like tie tacks and WWII stuff and among it was this token! OMG! I have bought all the tokens they had over the years along with flyers and post cards and all kinds of Motorama stuff, I dig everything Motorama. I just can't believe it, I now have a token my dad very likely got at a Motorama when he was a salesman!
Here is a little story about the Motorama, this particular show was in LA. They had four across the nation every year. They were car show, broadway play, rock concert all mixed into one. Amazing, shows, wish I could have experienced one. https://www.hemmings.com/…/gms-motor...to-los-angel…/

https://www.hemmings.com/blog/2012/0...-angeles-1956/

Brian

MiraclePieCo · 04-07-2019, 09:15 PM

Quote:

Originally Posted by MARTINSR

I can't believe it, I finally have a Motorama Token that was my dad's!
Brian

That's super cool Brian. I think I'd find a way to frame and display that piece of history.

Today I cut a patch to fill my original gas tank filler neck hole. I would liked to have used the original tank location but the tank and straps were missing when I got the truck, plus the rear 4-link intrudes on the space.

BTW: My truck is painted with DP90 epoxy primer; is there any way to blend fresh paint in after I finish this repair?

MARTINSR · 04-07-2019, 09:24 PM

You look like you are on the right track but I thought I would post some photos of mine in case anything may spark an idea for you. I have to assume that Suburban hole is similar, just flatter.

Brian

MARTINSR · 04-07-2019, 09:28 PM

This was the first thing I did on my truck when I got back to working on it after about 20 years!

Brian

MARTINSR · 04-07-2019, 09:29 PM

I welded it with my old Sears torch.

I love getting that thing in my hands!

Brian

MiraclePieCo · 04-07-2019, 09:34 PM

Quote:

Originally Posted by MARTINSR

I welded it with my old Sears torch.

I love getting that thing in my hands!

Brian

My panel truck opening is more elliptical, plus it's double layer wall there's no way to hammer it out from inside like with a pickup. I am leaving the lip on the edge of the hole, thinking it will add strength to minimize warping.

Any suggestions for blending in DP90 over the repair when I'm done? Never tried blending epoxy before.

03-31-2019, 10:41 PM	#1
evilokc Registered User Join Date: Mar 2013 Location: albuquerque New Mexico Posts: 522	Re: What did you do with your truck today, Part 3 tried to track down my coolant leak. I thought it was a hose clamp but it looks like my water pump has crapped out. its 17 years old so I guess I got my $35 out of it. im dealing with a bad radiator on my daily driver. basically everything I own is leaking coolant right now. had a nice drive though.

04-02-2019, 04:29 PM	#4
jeffs56 Registered User Join Date: May 2015 Location: Bakersfield California Posts: 301	Re: What did you do with your truck today, Part 3 Nice truck idbeast what paint did you use for your dash

04-02-2019, 11:45 PM	#5
MARTINSR Registered User Join Date: Dec 2000 Location: Boise, Idaho Posts: 6,003	Re: What did you do with your truck today, Part 3 Still working on my brothers dash. But I did get my heater box prepped for paint. Figured I would paint it with the paint and clear I am using on my brothers dash to get me some practice. I can't believe how out of it I am on painting, I used to do this for a living for goodness sakes! Hope my practicing boxing to keep in touch (I boxed amateur for 9 years) so if I need it I can use it. Because if it's anything like this painting I won't be able to handle a 16 year old 90 pounder! Brian __________________ 1948 Chevy pickup Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats! Bought with paper route money in 1973 when I was 15. "Fan of most anything that moves human beings"

04-03-2019, 06:51 PM	#6
DransportGarage Registered User Join Date: Feb 2010 Location: Lebanon, Ohio Posts: 1,359	Re: What did you do with your truck today, Part 3 Made the door panel board today, passenger side, out of 1/8" ABS. Boring. Special thanks to "The Lucky Needle" on YouTube for his 5-part video on "Making Custom Door Panels". He has a pretty cool method of using clear plastic to transfer the required shape of the panel to the board. https://www.youtube.com/watch?v=DulSVg0WRkc EDIT: I did notice that, to see the entire door panel build on this YouTube channel, there is a fee of $39.95. Nothing wrong with that, but be prepared if you want to see the actual upholstery part. Attached Images __________________ Bob "It won't take long and it won't cost much." '55 3100 (383/700R4)--'55 Belair Sedan (350/4-speed)--'64 'Vette Conv. (327/4-speed)--'68 GTO Conv. (462/4-speed)--'69 Cutlass Conv. (350/TH350)--'06 'Vette Conv. (LS2/6-speed) Bob's Retirement Build - My 55 TF Bob's 700R4 Build (how-to) Last edited by DransportGarage; 04-04-2019 at 12:52 PM.

04-04-2019, 09:20 AM	#8
nvrdone Registered User Join Date: Dec 2011 Location: Moxee WA Posts: 1,479	Re: What did you do with your truck today, Part 3 I picked up a set of HID headlights from a Jeep wrangler to replace my 7" seal beams. So last night I decided to install them. They went in easy with only a little trimming to the bucket. Then I took it for a test drive. Man are they bright!! Really makes a big difference in night driving.

04-04-2019, 11:52 AM	#10
Old Truck Man Registered User Join Date: Feb 2014 Location: Pocahontas Arkansas Posts: 684	Re: What did you do with your truck today, Part 3 We have too much stuff. So I have got my 82 wrecker up and running. And have been dragging out the 73 and newer square cab trucks and taking them apart. I have found Facebook Marketplace id a good venue to advertise and actually sell parts. I sold a rust free 86 cab to a guy in Missouri. Im in the process of stripping a 84 GMC that has a rust free 100% solid cab. I need to unhook the speedo cable and 4 cab to frame bolts and its ready to remove from the frame. Ive already sold some front crossmembers & suspension. and sold some rear ends. but we have plenty left. The 83 C20 has been earning its keep winchig stuff out of tight spots and dragging it within reach of my electric and air .

04-04-2019, 10:38 PM	#12
MARTINSR Registered User Join Date: Dec 2000 Location: Boise, Idaho Posts: 6,003	Re: What did you do with your truck today, Part 3 Got the heater cleared tonight, I am feeling much better about clearing my brothers dash. It's so wild, I have sprayed thousands of gallons of paint. I did it for a living for goodness sakes, sprayed in body shops all over California and even other states doing demos and stuff. But they put the gun down for a few decades and WHAM I am as uncomfortable as hell. Just spraying this heater fired me up, it looks great, I am ready to do the dash now. Brian __________________ 1948 Chevy pickup Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats! Bought with paper route money in 1973 when I was 15. "Fan of most anything that moves human beings"

04-05-2019, 12:24 PM	#15
NeoJuice Registered User Join Date: Nov 2016 Location: Beaumont, Alberta Posts: 468	Re: What did you do with your truck today, Part 3 I found purchasing large blue tarps from the dollar store work really well and its cheap insurance. I've saved my garage floor many times with a tarp. There also easy to roll over with my floor creeper as well. Just a tip I thought I would share.

04-06-2019, 05:40 PM	#16
MiraclePieCo Registered User Join Date: Sep 2014 Location: USA Posts: 2,249	Re: What did you do with your truck today, Part 3 I finished my window channel installation that got interrupted last week. Did the passenger side rollers, channels, sweeps, fuzzies and inside trim. Hard to see in the pics, but it looks nice and the windows work smoothly and quietly. Attached Images __________________ 1951 Chevy Panel Truck Last edited by MiraclePieCo; 04-06-2019 at 09:30 PM.

04-05-2019, 09:19 AM	#17
nvrdone Registered User Join Date: Dec 2011 Location: Moxee WA Posts: 1,479	Re: What did you do with your truck today, Part 3 sorry - no pictures. I haven't figured how to post them on this site. if you pm me your phone # I could send them to you.

04-07-2019, 01:19 AM	#18
MARTINSR Registered User Join Date: Dec 2000 Location: Boise, Idaho Posts: 6,003	Re: What did you do with your truck today, Part 3 Daamn Kcmarkd, that is a nice truck! Brian __________________ 1948 Chevy pickup Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats! Bought with paper route money in 1973 when I was 15. "Fan of most anything that moves human beings"

04-07-2019, 04:48 PM	#20
MARTINSR Registered User Join Date: Dec 2000 Location: Boise, Idaho Posts: 6,003	Re: What did you do with your truck today, Part 3 Well, my brother dash is gone, I can go back to focusing on my truck! I can't believe it, I finally have a Motorama Token that was my dad's! He was a Olds and Buick Salesman in the fifties all the way up to 1979 and I couldn't believe that he never mentioned ever going to a Motorama being we live across the bay from SF. Today my brother brought over a bunch of stuff of his like tie tacks and WWII stuff and among it was this token! OMG! I have bought all the tokens they had over the years along with flyers and post cards and all kinds of Motorama stuff, I dig everything Motorama. I just can't believe it, I now have a token my dad very likely got at a Motorama when he was a salesman! Here is a little story about the Motorama, this particular show was in LA. They had four across the nation every year. They were car show, broadway play, rock concert all mixed into one. Amazing, shows, wish I could have experienced one. https://www.hemmings.com/…/gms-motor...to-los-angel…/ https://www.hemmings.com/blog/2012/0...-angeles-1956/ Brian Attached Images __________________ 1948 Chevy pickup Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats! Bought with paper route money in 1973 when I was 15. "Fan of most anything that moves human beings"

04-07-2019, 09:24 PM	#22
MARTINSR Registered User Join Date: Dec 2000 Location: Boise, Idaho Posts: 6,003	Re: What did you do with your truck today, Part 3 You look like you are on the right track but I thought I would post some photos of mine in case anything may spark an idea for you. I have to assume that Suburban hole is similar, just flatter. Brian Attached Images __________________ 1948 Chevy pickup Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats! Bought with paper route money in 1973 when I was 15. "Fan of most anything that moves human beings"

04-07-2019, 09:28 PM	#23
MARTINSR Registered User Join Date: Dec 2000 Location: Boise, Idaho Posts: 6,003	Re: What did you do with your truck today, Part 3 This was the first thing I did on my truck when I got back to working on it after about 20 years! Brian Attached Images __________________ 1948 Chevy pickup Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats! Bought with paper route money in 1973 when I was 15. "Fan of most anything that moves human beings"

04-07-2019, 09:29 PM	#24
MARTINSR Registered User Join Date: Dec 2000 Location: Boise, Idaho Posts: 6,003	Re: What did you do with your truck today, Part 3 I welded it with my old Sears torch. I love getting that thing in my hands! Brian Attached Images __________________ 1948 Chevy pickup Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats! Bought with paper route money in 1973 when I was 15. "Fan of most anything that moves human beings"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.