How about some pics of bagged C-10's - Page 107 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

turbohacker · 05-12-2008, 07:49 AM

Mine ...needs to be alot lower...

jmuck · 05-15-2008, 03:51 PM

Here is my 72 blazer I built to take to cruizin the coast last Oct. It is now in pieces again getting some other things done. I will post new pics when finished.

DM310 · 08-22-2008, 05:38 PM

Heres my 66 Kustom

**N2TRUX** · 08-20-2008, 11:58 PM

Quote:

Originally Posted by droppedc_class

Hmmm...that doesn't look quite right

You posted a link to his gallery. Here's what I found there-

droppedc_class · 08-28-2008, 11:22 PM

Quote:

Originally Posted by steveo10

c_class do you have any pics of the interior? that truck looks sooo good.

Thanks to n2trux for getting my pic to work!!
Sorry,steveo10,but I dont have any pics of the interior right now.
It's not my truck, it belongs to the guy who is building mine.
He just finished up the final details on his this week and is taking it to the
///RA ALL STAR show in millington,tn this weekend.
He just registered to this site this week also,and will hopefully be posting some pics maby next week or so.

turbohacker · 08-23-2008, 01:08 AM

Updated of mine...

p-low · 08-31-2008, 09:58 PM

heres a couple of my 68 just this weekend just after i set the cab back on it after finishing the underside and firewall so i could clean up around it prior to leaving for college again.....enjoy

jrods70 · 09-05-2008, 08:27 PM

here is my 70 lwb

1sik7t2 · 10-31-2008, 12:34 AM

JROD LOVE THE LONGBED ****PLEASE KEEP IT***** THEY NEED LOVIN TOO

Quote:

Originally Posted by jrods70

here is my 70 lwb

texastrendz · 09-05-2008, 08:54 PM

hey jrod,
you got any pics on your rear setup, i am in the middle of bagging my lwb and i am curious about the carrier bearing and what ya did with it. thanks for any help.

jrods70 · 09-05-2008, 09:10 PM

i took the traling arm cossmember and flipped it over so the bearing mount is to the bottom of the frame now i can get some pics up by sunday for ya

scotts62 · 09-05-2008, 09:20 PM

Here is my pic

c10addict · 09-10-2008, 10:22 PM

Well here are the pics I promised of my new rat/shop/hot rod truck... Its a 64 C10 350 with a 700R4 and a 3:42 posi rear.. Porterbuilt Dropmember with ART control arms, KP notch with 2 inch blocks... 91 Chevy seat with the frame cut down and recovered black/houndstooth. 19 gallon fuel tank between the rear frame rails. bed floor was raised so the floor was still flat... truck drives so freakin nice its unreal... Front inner fenders fabbed and hinges moved to firewall.. All the logos are new but weathered to look old.. They are from dragstips in the local area that closed in the late 70's Don't pay attention to the date stamp on the pics...

baggedcten · 09-10-2008, 10:33 PM

heres my truck 86 this pic kind of old im in the process of doing a four link with the bag on bars and cutting the cups up front would post a newer pic but dont have a camera

lets see if this works

PBFAB.COM · 09-11-2008, 01:53 AM

Quote:

Originally Posted by c10addict

Well here are the pics I promised of my new rat/shop/hot rod truck... Its a 64 C10 350 with a 700R4 and a 3:42 posi rear.. Porterbuilt Dropmember with ART control arms, KP notch with 2 inch blocks... 91 Chevy seat with the frame cut down and recovered black/houndstooth. 19 gallon fuel tank between the rear frame rails. bed floor was raised so the floor was still flat... truck drives so freakin nice its unreal... Front inner fenders fabbed and hinges moved to firewall.. All the logos are new but weathered to look old.. They are from dragstips in the local area that closed in the late 70's Don't pay attention to the date stamp on the pics...

I absolutely love it!

c10addict · 09-11-2008, 07:26 AM

Quote:

Originally Posted by porterbuilt

I absolutely love it!

Thanks Nate... Thanks for your help with the sway bar as well, its ordered and on its way..

smashingchuck · 09-11-2008, 09:14 AM

Quote:

Originally Posted by c10addict

Thanks Nate... Thanks for your help with the sway bar as well, its ordered and on its way..

not to get to far off topic here, but please PM me about the sway bar you speak of. A part number would be awesome. I just happen to have my other browser tab open to summit trying to find one, and they make a blu emillion of them.

bagged69c10 · 09-11-2008, 11:55 PM

C10addict. Who made those front tubs? I want some!

babyblueoval · 09-17-2008, 09:23 AM

Quote:

Originally Posted by smashingchuck

not to get to far off topic here, but please PM me about the sway bar you speak of. A part number would be awesome.

X2 - or post it on here for everyones use.

SCOTI · 09-17-2008, 12:04 PM

Quote:

Originally Posted by smashingchuck

not to get to far off topic here, but please pm me about the sway bar you speak of. A part number would be awesome....

x3 . . .....

Dinos63 · 09-12-2008, 12:42 AM

Quote:

Originally Posted by c10addict

Well here are the pics I promised of my new rat/shop/hot rod truck... Its a 64 C10 350 with a 700R4 and a 3:42 posi rear.. Porterbuilt Dropmember with ART control arms, KP notch with 2 inch blocks... 91 Chevy seat with the frame cut down and recovered black/houndstooth. 19 gallon fuel tank between the rear frame rails. bed floor was raised so the floor was still flat... truck drives so freakin nice its unreal... Front inner fenders fabbed and hinges moved to firewall.. All the logos are new but weathered to look old.. They are from dragstips in the local area that closed in the late 70's Don't pay attention to the date stamp on the pics...

dude dig the truck , nice work , well done

c10addict · 09-12-2008, 07:39 AM

Quote:

Originally Posted by Dinos63

dude dig the truck , nice work , well done

Thanks Dino... You got a bad a$$ collection !!!! My inspiration!

66 shark · 04-07-2009, 07:33 PM

Quote:

Originally Posted by c10addict

Well here are the pics I promised of my new rat/shop/hot rod truck... Its a 64 C10 350 with a 700R4 and a 3:42 posi rear.. Porterbuilt Dropmember with ART control arms, KP notch with 2 inch blocks... 91 Chevy seat with the frame cut down and recovered black/houndstooth. 19 gallon fuel tank between the rear frame rails. bed floor was raised so the floor was still flat... truck drives so freakin nice its unreal... Front inner fenders fabbed and hinges moved to firewall.. All the logos are new but weathered to look old.. They are from dragstips in the local area that closed in the late 70's Don't pay attention to the date stamp on the pics...

i was wondering if u could tell me how u went about mounting the hinges to the firewall and if the are the originals and u just modified them to work. i have a 66 and just ordered the dropmember kit also so i wanted to figure out the best way to mount the hood thanx ur time is appreciated

c10addict · 04-07-2009, 09:40 PM

Quote:

Originally Posted by 66 shark

i was wondering if u could tell me how u went about mounting the hinges to the firewall and if the are the originals and u just modified them to work. i have a 66 and just ordered the dropmember kit also so i wanted to figure out the best way to mount the hood thanx ur time is appreciated

The hinges on mine are off of a 57 chevy pick up... They are attached to a piece of 2x4 square stock welded to the firewall. Save your self the time and effort and call Nate at Porterbilt back.. He now makes brackets to mount the stock hinges to... Well worth the $$$

texastrendz · 05-02-2009, 10:03 PM

72 long bed with 68 nose, cuped lower arms with kp notch and brackets rear with factory trailing arms. sorry for all the post, just got the pic thing figured out again.

05-12-2008, 07:49 AM	#1
turbohacker PISS POOR Join Date: Dec 2007 Location: visalia, ca Posts: 98	Re: post all bagged c10 here Mine ...needs to be alot lower... __________________ Slammed 67 long bed with vette suspention build thread http://67-72chevytrucks.com/vboard/s...d.php?t=291149

05-15-2008, 03:51 PM	#2
jmuck Registered User Join Date: Mar 2006 Location: Nacogdoches, Tx Posts: 167	Re: post all bagged c10 here Here is my 72 blazer I built to take to cruizin the coast last Oct. It is now in pieces again getting some other things done. I will post new pics when finished. Attached Images

08-22-2008, 05:38 PM	#3
DM310 Registered User Join Date: Jan 2005 Location: Los Angeles Posts: 256	Re: post all bagged c10 here Heres my 66 Kustom __________________ 66 C10 (under construction) 1.5" crossmember drop 2" Z'ed frame 8" rear notch Watts-link Bagged DJM 3" spindles

08-23-2008, 01:08 AM	#6
turbohacker PISS POOR Join Date: Dec 2007 Location: visalia, ca Posts: 98	Re: post all bagged c10 here Updated of mine... __________________ Slammed 67 long bed with vette suspention build thread http://67-72chevytrucks.com/vboard/s...d.php?t=291149

08-31-2008, 09:58 PM	#7
p-low Registered User Join Date: Feb 2006 Location: buffalo Posts: 178	Re: post all bagged c10 here heres a couple of my 68 just this weekend just after i set the cab back on it after finishing the underside and firewall so i could clean up around it prior to leaving for college again.....enjoy Attached Images

09-05-2008, 08:27 PM	#8
jrods70 Registered User Join Date: Oct 2006 Location: fort collins co Posts: 22	Re: post all bagged c10 here here is my 70 lwb Attached Images

09-05-2008, 08:54 PM	#10
texastrendz Registered User Join Date: Jan 2008 Location: HOUSTON TX Posts: 1,161	Re: post all bagged c10 here hey jrod, you got any pics on your rear setup, i am in the middle of bagging my lwb and i am curious about the carrier bearing and what ya did with it. thanks for any help.

09-05-2008, 09:10 PM	#11
jrods70 Registered User Join Date: Oct 2006 Location: fort collins co Posts: 22	Re: post all bagged c10 here i took the traling arm cossmember and flipped it over so the bearing mount is to the bottom of the frame now i can get some pics up by sunday for ya

09-05-2008, 09:20 PM	#12
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: post all bagged c10 here Here is my pic __________________ Scott 93 crew cab build Project 62

09-10-2008, 10:22 PM	#13
c10addict Registered User Join Date: Aug 2007 Location: pittsburgh pa Posts: 1,970	Re: post all bagged c10 here Well here are the pics I promised of my new rat/shop/hot rod truck... Its a 64 C10 350 with a 700R4 and a 3:42 posi rear.. Porterbuilt Dropmember with ART control arms, KP notch with 2 inch blocks... 91 Chevy seat with the frame cut down and recovered black/houndstooth. 19 gallon fuel tank between the rear frame rails. bed floor was raised so the floor was still flat... truck drives so freakin nice its unreal... Front inner fenders fabbed and hinges moved to firewall.. All the logos are new but weathered to look old.. They are from dragstips in the local area that closed in the late 70's Don't pay attention to the date stamp on the pics... Attached Images __________________ 68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08 67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast. 64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten.. 54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread... 07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind.. http://67-72chevytrucks.com/vboard/s...d.php?t=339340 See pics of my trucks in my profile Last edited by c10addict; 09-10-2008 at 10:24 PM.

09-10-2008, 10:33 PM	#14
baggedcten 86 C10 Join Date: Sep 2007 Location: Ga. Posts: 416	Re: post all bagged c10 here heres my truck 86 this pic kind of old im in the process of doing a four link with the bag on bars and cutting the cups up front would post a newer pic but dont have a camera lets see if this works __________________ 1986 C10 2001 chevy silverado purchased 8-29-09 sold 2004 silverado purchased 8-27-10 sold Last edited by baggedcten; 09-10-2008 at 10:39 PM. Reason: add pic

09-11-2008, 11:55 PM	#18
bagged69c10 soon to be bagged64sub Join Date: Feb 2005 Location: DFW-currently phoenix Posts: 635	Re: post all bagged c10 here C10addict. Who made those front tubs? I want some! __________________ 1969 c-10, bagged, Zd, 20" Boyds SOLD! 1964 Suburban COMING SOON Build threadhttp://67-72chevytrucks.com/vboard/s...d.php?t=304726 1965 c-10 long bed 1993 Sierra x-cab 1999 tahoe-4/5 on 22s 2005 Chevy work truck

05-02-2009, 10:03 PM	#25
texastrendz Registered User Join Date: Jan 2008 Location: HOUSTON TX Posts: 1,161	Re: How about some pics of bagged C-10's 72 long bed with 68 nose, cuped lower arms with kp notch and brackets rear with factory trailing arms. sorry for all the post, just got the pic thing figured out again.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.