Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy - Page 108 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

G-NUT · 01-14-2015, 11:30 AM

I just in Glenpool, just south of Tulsa. I think it takes me about an hour or so to get to Siloam Springs

gmclowsierra · 01-14-2015, 11:34 AM

im sure you already told us but what are the front seats out of?

**67cheby** · 01-14-2015, 11:35 AM

Quote:

Originally Posted by G-NUT

I just in Glenpool, just south of Tulsa. I think it takes me about an hour or so to get to Siloam Springs

Perfect ! save you about $150 on shipping !

Quote:

Originally Posted by gmclowsierra

im sure you already told us but what are the front seats out of?

09 Accord EX Coupe

G-NUT · 01-14-2015, 11:41 AM

Awesome. I can handle that.

G-NUT · 01-14-2015, 11:59 AM

Quote:

Originally Posted by 67cheby

Perfect ! save you about $150 on shipping !

PM Sent.

MI2CHEVYS · 01-15-2015, 02:52 AM

I've spent the last 5 days checking out this build and I have to hand it to you and your friends, you guys built one of the finest looking Blazers I have ever seen. Congratulations !

Question: How does it handle ? I noticed that both bars on the 4 link are under the axle tubes and as far as I know on a 4 link one bar should be on top & one bar under the axle tubes. I saw a picture in the beginning of the build of an example, then when you built it it was different. I can't believe that no one mentioned it.

It was a great pleasure to see it & Good Luck with Boosted Bertha I will be watching !

**67cheby** · 01-15-2015, 10:51 AM

Quote:

Originally Posted by MI2CHEVYS

I've spent the last 5 days checking out this build and I have to hand it to you and your friends, you guys built one of the finest looking Blazers I have ever seen. Congratulations !

Question: How does it handle ? I noticed that both bars on the 4 link are under the axle tubes and as far as I know on a 4 link one bar should be on top & one bar under the axle tubes. I saw a picture in the beginning of the build of an example, then when you built it it was different. I can't believe that no one mentioned it.

It was a great pleasure to see it & Good Luck with Boosted Bertha I will be watching !

You are exactly correct the rear setup in mock up stages was just fine but when everything was assembeled and had the weight of the vehicle on it and 12 inches of travel it kept breaking the rearend over dead center and plunging the pinion to the ground. We totally redid the rear 4 link when we got it back from SEMA we built new mounts to spread the front mounts out further and built new rear mounts to spread them further and move it to use one on top and one on the underside of the rearend, no problems after we did that .

DREAMER1 · 01-20-2015, 11:16 AM

You wouldn't happen to have some pics of this new setup would you Mike?

**67cheby** · 01-20-2015, 03:56 PM

Quote:

Originally Posted by DREAMER1

You wouldn't happen to have some pics of this new setup would you Mike?

I sure dont

**67cheby** · 01-20-2015, 03:58 PM

I do have this one though ! LOL, one of my favorites !

808_67C10 · 01-22-2015, 12:50 AM

Unreal! Two amazing works of art!

Damien · 03-01-2015, 12:33 AM

Every time I see this truck in the QA1 Catalog I think someone made a typo calling it an '87.

**67cheby** · 03-01-2015, 12:58 AM

Quote:

Originally Posted by Damien

Every time I see this truck in the QA1 Catalog I think someone made a typo calling it an '87.

Do you have a picture of the catalog, I haven't seen it ?

Damien · 03-01-2015, 01:13 PM

Here is a link to the online catalog.
http://www.qa1.net/catalog/motorsports/#40

slammedwhitec5vert · 12-21-2015, 07:23 AM

Incredible build spent the whole night reading it.

**67cheby** · 12-21-2015, 11:13 AM

Quote:

Originally Posted by slammedwhitec5vert

Incredible build spent the whole night reading it.

Thank you , I appreciate that !

kehstr · 01-10-2017, 12:00 AM

I love this build! definitely one of a kind! I'm interested in seeing more on the custom valve covers, really considering on doing something similar

**67cheby** · 01-10-2017, 11:15 AM

Quote:

Originally Posted by kehstr

I love this build! definitely one of a kind! I'm interested in seeing more on the custom valve covers, really considering on doing something similar

they are 50's model inline 6 cyl valve covers shortened down. Thanks!

kehstr · 01-10-2017, 11:18 AM

Quote:

Originally Posted by 67cheby

they are 50's model inline 6 cyl valve covers shortened down. Thanks!

cool! as I look through your thread I only see how you built them, nothing on how they were mounted them, did i miss something, or do you have more info that you happened to forget to post on this thread?

**67cheby** · 01-10-2017, 11:48 AM

Quote:

Originally Posted by kehstr

cool! as I look through your thread I only see how you built them, nothing on how they were mounted them, did i miss something, or do you have more info that you happened to forget to post on this thread?

LOL, they fit so snug over the coils and with the plug wires coming through the side i didnt mount them at all just pushed down on and stayed in place

**GR8-68** · 03-21-2017, 06:44 AM

I just have to say these are two amazing trucks you have put together

Great work

01-14-2015, 11:30 AM	#2676
G-NUT Registered User Join Date: Apr 2014 Location: Baldwin County, Alabama Posts: 163	Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy I just in Glenpool, just south of Tulsa. I think it takes me about an hour or so to get to Siloam Springs __________________ '84 Suburban C10 Silverado - laying pinchweld to the ground on 22/24. /Porterbuilt / Accuair / Bonspeed / Landsail / Auburn Gear / Richmond Gear / Moser / Raybestos / ProMaxx / Edlebrock / Street Demon / Taylor Wire / K&N / MSD / KillMat / SOLD: 1985 GMC Sierra Classic 2500 3+3 Crew Cab Long Bed

01-14-2015, 11:34 AM	#2677
gmclowsierra Registered User Join Date: Mar 2008 Location: williamsport,pa Posts: 329	Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy im sure you already told us but what are the front seats out of?

01-14-2015, 11:41 AM	#2679
G-NUT Registered User Join Date: Apr 2014 Location: Baldwin County, Alabama Posts: 163	Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy Awesome. I can handle that. __________________ '84 Suburban C10 Silverado - laying pinchweld to the ground on 22/24. /Porterbuilt / Accuair / Bonspeed / Landsail / Auburn Gear / Richmond Gear / Moser / Raybestos / ProMaxx / Edlebrock / Street Demon / Taylor Wire / K&N / MSD / KillMat / SOLD: 1985 GMC Sierra Classic 2500 3+3 Crew Cab Long Bed

01-15-2015, 02:52 AM	#2681
MI2CHEVYS Registered User Join Date: Mar 2007 Location: PHOENIX, ARIZONA Posts: 123	Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy I've spent the last 5 days checking out this build and I have to hand it to you and your friends, you guys built one of the finest looking Blazers I have ever seen. Congratulations ! Question: How does it handle ? I noticed that both bars on the 4 link are under the axle tubes and as far as I know on a 4 link one bar should be on top & one bar under the axle tubes. I saw a picture in the beginning of the build of an example, then when you built it it was different. I can't believe that no one mentioned it. It was a great pleasure to see it & Good Luck with Boosted Bertha I will be watching ! __________________ MY DAD HAD A SAYING " DO IT RIGHT OR GET THE F**K OUTA HERE!" http://s657.photobucket.com/albums/u...view=slideshow

01-20-2015, 11:16 AM	#2683
DREAMER1 Registered User Join Date: Dec 2010 Location: baytown, texas Posts: 310	Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy You wouldn't happen to have some pics of this new setup would you Mike?

01-20-2015, 03:58 PM	#2685
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy I do have this one though ! LOL, one of my favorites ! Attached Images __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

01-22-2015, 12:50 AM	#2686
808_67C10 Registered User Join Date: Sep 2011 Location: Hilo, Hawaii Posts: 1,051	Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy Unreal! Two amazing works of art! __________________ Frank (Hilo, Hawaii) Trucks, Tacos, and Beer go together like Peanut Butter and Ladies! 85 C/10 SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=760383 67 C/10 SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=489298 79 K5 Blazer SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=657461

03-01-2015, 12:33 AM	#2687
Damien Registered User Join Date: Mar 2007 Location: Farmington, MN Posts: 928	Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy Every time I see this truck in the QA1 Catalog I think someone made a typo calling it an '87. __________________ I can still count my vehicles on two... wait three hands.

03-01-2015, 01:13 PM	#2689
Damien Registered User Join Date: Mar 2007 Location: Farmington, MN Posts: 928	Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy Here is a link to the online catalog. http://www.qa1.net/catalog/motorsports/#40 __________________ I can still count my vehicles on two... wait three hands.

12-21-2015, 07:23 AM	#2690
slammedwhitec5vert Registered User Join Date: Nov 2015 Location: Houston Posts: 4	Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy Incredible build spent the whole night reading it.

01-10-2017, 12:00 AM	#2692
kehstr Registered User Join Date: Mar 2015 Location: Utah Posts: 750	Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy I love this build! definitely one of a kind! I'm interested in seeing more on the custom valve covers, really considering on doing something similar __________________ 72 GMC highlander nicknamed by my then 6-year-old brother "stripes" http://67-72chevytrucks.com/vboard/s....php?p=7378180 Check out my Youtube channel @Chad's Fab

03-21-2017, 06:44 AM	#2696
GR8-68 Senior Member Join Date: Jun 2009 Location: Belews Creek , NC Posts: 4,220	Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy I just have to say these are two amazing trucks you have put together Great work __________________ Larry It is easily overlooked that what is now called vintage was once brand new. "Project 68" paypal.me/ldgrant



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.