What did you do to your truck today? Chapter II - Page 109 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

CST10 · 09-09-2015, 09:12 PM

Quote:

Originally Posted by 88fordf150

Mounted the cab on the frame for the last time today.

Oh yea that a nice looking engine there.

In The Ten Ring · 09-09-2015, 09:15 PM

I got a little bit done today.

I checked into getting the front bumper painted. I can get it sandblasted and powder coated for $125.00 but I'll have to bring it in to the paint shop for an estimate.

I might do that Friday morning on my way to pick up the cowl from the epoxy primer guy.

I also cleaned up some screws and asked on here about removing and replacing the heater box caulk.

dzbowtie · 09-10-2015, 12:16 PM

Added a fresh tach to the ol girl today

Mator · 09-10-2015, 01:55 PM

Added a new rear bumper and new bumper brackets. It doesn't seem to look right though. Brand new premium bumper. Doesn't it look like it is angled down? Is this right?

hamjet · 09-10-2015, 02:04 PM

Quote:

Originally Posted by Mator

Added a new rear bumper and new bumper brackets. It doesn't seem to look right though. Brand new premium bumper. Doesn't it look like it is angled down? Is this right?

It does appear to be angled wrong, doesn't it. Beautiful Truck!!

Lanman1972 · 09-10-2015, 02:07 PM

Any chance it is a Fleetside bumper? Or brackets are on the wrong side R&L. Never mounted a Stepside bumper, but that doesn't look right. Beautiful Truck!

Bowtiguy · 09-10-2015, 03:24 PM

Quote:

Originally Posted by Lanman1972

Any chance it is a Fleetside bumper? Or brackets are on the wrong side R&L. Never mounted a Stepside bumper, but that doesn't look right. Beautiful Truck!

That would be my guess. It took me FOREVER to get my back fleetside bumper aligned with a new bumper/brackets. Fitting around the NLE tank and porterbuilt rear frame brace didn't help either.

toolboxchev · 09-10-2015, 04:24 PM

Doing the front wheel bearing maintenance today, Every year, Ugh!

Phildeez · 09-10-2015, 04:44 PM

I found a crack in my passenger side ram horn. I bought a decent set locally for $20. The only issue I ran into was the new set was the alt. mount type. Instead of modifying the alternator mount to work, I modified the manifold.

Phildeez · 09-10-2015, 04:45 PM

A couple more.

66pnl · 09-11-2015, 03:42 AM

Started the fuel line on the new motor.

Mator · 09-11-2015, 10:55 AM

Added 2 inch blocks to the back courtesy of way2lo2. Now 3-7 to level it out.

aod92 · 09-11-2015, 10:58 AM

Quote:

Originally Posted by Mator

Added 2 inch blocks to the back courtesy of way2lo2. Now 3-7 to level it out.

Looks nice!

Redline novdog · 09-11-2015, 08:23 PM

AOD92 I can't see it??? PICS???

Redline novdog · 09-11-2015, 08:25 PM

MY BAD!!!! I see it I see it!!!

firedemon · 09-11-2015, 08:42 PM

Quote:

Originally Posted by Mator

Added 2 inch blocks to the back courtesy of way2lo2. Now 3-7 to level it out.

man your garage floor is cleaner than my truck . I like the security system too

In The Ten Ring · 09-11-2015, 09:45 PM

More done today than in a long time!

I checked on getting the front bumper sandblasted and painted.

I called but could not reach the media blaster guy that has my cowl.

I drilled out the rivets on the heater box, removed most of the old caulk, washed the heater box, and have some of its internals soaking in Evaporust.

Mator · 09-11-2015, 10:15 PM

Quote:

Originally Posted by firedemon

man your garage floor is cleaner than my truck . I like the security system too

He's a good helper.

Bomp · 09-11-2015, 11:13 PM

A little dash work.
Before and after......... still needing a little work.

Lees68GMC · 09-11-2015, 11:25 PM

Put the ol 68 GMC up on the rack out at Tim's shop to look at the new 3" tail-pipes Bill fabbed and installed for me.

Plus . . . . Sept 11, 2001 NEVER FORGET

9teen69 · 09-11-2015, 11:42 PM

Quote:

Originally Posted by 66pnl

Started the fuel line on the new motor.

Your motor looks sick...cool contrast and the script valve covers

9teen69 · 09-11-2015, 11:44 PM

Quote:

Originally Posted by Lees68GMC

Put the ol 68 GMC up on the rack out at Tim's shop to look at the new 3" tail-pipes Bill fabbed and installed for me.

Plus . . . . Sept 11, 2001 NEVER FORGET

WORD!

88fordf150 · 09-13-2015, 12:44 PM

Quote:

Originally Posted by Mator

Added a new rear bumper and new bumper brackets. It doesn't seem to look right though. Brand new premium bumper. Doesn't it look like it is angled down? Is this right?

What color is that truck? Looks great!

Mator · 09-13-2015, 06:57 PM

Quote:

Originally Posted by 88fordf150

What color is that truck? Looks great!

House of color 1125-1 shimmer 2 candy red with a bronze intensifier. Thanks.

In The Ten Ring · 09-19-2015, 07:22 PM

I didn't do much but I did a little. Moved my grill over to my parents' garage, where I'll have more room to work on it.

I NAPA Rust Treated the driver side grill bracket and primed and top coated the passenger side one.

09-09-2015, 09:15 PM	#2702
In The Ten Ring Registered User Join Date: Jun 2013 Location: West Virginia Posts: 6,427	Re: What did you do to your truck today? Chapter II I got a little bit done today. I checked into getting the front bumper painted. I can get it sandblasted and powder coated for $125.00 but I'll have to bring it in to the paint shop for an estimate. I might do that Friday morning on my way to pick up the cowl from the epoxy primer guy. I also cleaned up some screws and asked on here about removing and replacing the heater box caulk.

09-10-2015, 12:16 PM	#2703
dzbowtie Registered User Join Date: Jun 2010 Location: Clarksville, Tn Posts: 142	Re: What did you do to your truck today? Chapter II Added a fresh tach to the ol girl today Attached Images __________________ Last edited by dzbowtie; 09-10-2015 at 12:24 PM.

09-10-2015, 01:55 PM	#2704
Mator Registered User Join Date: Jan 2013 Location: Clinton Iowa Posts: 337	Re: What did you do to your truck today? Chapter II Added a new rear bumper and new bumper brackets. It doesn't seem to look right though. Brand new premium bumper. Doesn't it look like it is angled down? Is this right? Attached Images __________________ Build sheet http://67-72chevytrucks.com/vboard/s....php?p=7277491

09-10-2015, 02:07 PM	#2706
Lanman1972 Registered User Join Date: Dec 2013 Location: Omaha NE Posts: 620	Re: What did you do to your truck today? Chapter II Any chance it is a Fleetside bumper? Or brackets are on the wrong side R&L. Never mounted a Stepside bumper, but that doesn't look right. Beautiful Truck!

09-10-2015, 04:24 PM	#2708
toolboxchev Registered User Join Date: Jul 2015 Location: 2nd left past the stump on a dirt road. Posts: 2,629	Re: What did you do to your truck today? Chapter II Doing the front wheel bearing maintenance today, Every year, Ugh!

09-10-2015, 04:44 PM	#2709
Phildeez Registered User Join Date: Jul 2015 Location: Riverside, Ca. Posts: 88	Re: What did you do to your truck today? Chapter II I found a crack in my passenger side ram horn. I bought a decent set locally for $20. The only issue I ran into was the new set was the alt. mount type. Instead of modifying the alternator mount to work, I modified the manifold. Attached Images

09-10-2015, 04:45 PM	#2710
Phildeez Registered User Join Date: Jul 2015 Location: Riverside, Ca. Posts: 88	Re: What did you do to your truck today? Chapter II A couple more. Attached Images

09-11-2015, 03:42 AM	#2711
66pnl Registered User Join Date: Mar 2014 Location: Eagle creek or Posts: 108	Re: What did you do to your truck today? Chapter II Started the fuel line on the new motor. Attached Images __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=620707

09-11-2015, 10:55 AM	#2712
Mator Registered User Join Date: Jan 2013 Location: Clinton Iowa Posts: 337	Re: What did you do to your truck today? Chapter II Added 2 inch blocks to the back courtesy of way2lo2. Now 3-7 to level it out. Attached Images __________________ Build sheet http://67-72chevytrucks.com/vboard/s....php?p=7277491

09-11-2015, 08:23 PM	#2714
Redline novdog Registered User Join Date: Jan 2012 Location: Washington,Il Posts: 632	Re: What did you do to your truck today? Chapter II AOD92 I can't see it??? PICS??? __________________ It builds on my intelligence when I make a mistake, Boy am I building on it! '67 C-10,'70 Nova SS

09-11-2015, 08:25 PM	#2715
Redline novdog Registered User Join Date: Jan 2012 Location: Washington,Il Posts: 632	Re: What did you do to your truck today? Chapter II MY BAD!!!! I see it I see it!!! __________________ It builds on my intelligence when I make a mistake, Boy am I building on it! '67 C-10,'70 Nova SS

09-11-2015, 09:45 PM	#2717
In The Ten Ring Registered User Join Date: Jun 2013 Location: West Virginia Posts: 6,427	Re: What did you do to your truck today? Chapter II More done today than in a long time! I checked on getting the front bumper sandblasted and painted. I called but could not reach the media blaster guy that has my cowl. I drilled out the rivets on the heater box, removed most of the old caulk, washed the heater box, and have some of its internals soaking in Evaporust.

09-11-2015, 11:13 PM	#2719
Bomp Registered User Join Date: Apr 2011 Location: . Posts: 3,104	Re: What did you do to your truck today? Chapter II A little dash work. Before and after......... still needing a little work.

09-11-2015, 11:25 PM	#2720
Lees68GMC Registered User Join Date: Jul 2013 Location: Prescott Arizona Posts: 343	Re: What did you do to your truck today? Chapter II Put the ol 68 GMC up on the rack out at Tim's shop to look at the new 3" tail-pipes Bill fabbed and installed for me. Plus . . . . Sept 11, 2001 NEVER FORGET Attached Images __________________ 68 GMC SWB Vortec 5.3 98 Chevy Blazer ZR2 94 Mazda Miata, LS2 6 speed, sold "No matter what happens, nobody gets out alive"

09-19-2015, 07:22 PM	#2725
In The Ten Ring Registered User Join Date: Jun 2013 Location: West Virginia Posts: 6,427	Re: What did you do to your truck today? Chapter II I didn't do much but I did a little. Moved my grill over to my parents' garage, where I'll have more room to work on it. I NAPA Rust Treated the driver side grill bracket and primed and top coated the passenger side one.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.