Tricked-out Chevy six cylinder engines - Page 11 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

TJ's Chevy · 03-24-2013, 10:51 PM

Quote:

Originally Posted by KroAutomotiveInc

Heres a picture of a split manifold easy way to get dual exhaust also doesn't take away your exhaust heat to the intake.

Watch out for leaks!

Have plenty on mine. Poor ol

.

TJ's Chevy · 03-24-2013, 10:53 PM

[QUOTE=KroAutomotiveInc;5968474]Heres a picture of a split manifold easy way to get dual exhaust also doesn't take away your exhaust heat to the intake.

[/Q

Just show me the car fax man!

KroAutomotiveInc · 03-25-2013, 03:23 AM

yeah welding cast is a bit tricky forsure!

TJ's Chevy · 03-25-2013, 11:34 AM

OH THE DRAMMA!

TJ's Chevy · 03-25-2013, 03:09 PM

Quote:

Originally Posted by KroAutomotiveInc

Ive also found with my 230 that removing the motor fan and using an electric fan has made a noticeable power increases to the motor lol!

Thats funney!

Cause my friends was tellin me me it would not male a noticeabe
differance

Shame on them! Just kiddin!

TJ's Chevy · 03-28-2013, 06:58 PM

YA Know its been awfully quiet here........I thinks we need some new hot rod 6
cylinder chevys.

TJ's Chevy · 03-28-2013, 07:01 PM

Quote:

Originally Posted by KroAutomotiveInc

yeah welding cast is a bit tricky forsure!

Ya know, Theres nothin better than a triple carb setup on a 6 cylinder. The
only problem for me is trying to get them all ajusted evenly.

KroAutomotiveInc · 03-28-2013, 08:04 PM

Quote:

Originally Posted by T.J. MCCAULEY

Ya know, Theres nothin better than a triple carb setup on a 6 cylinder. The
only problem for me is trying to get them all ajusted evenly.

yeah cant beat the look but i say just use a 4bbl and make it easy on yourself lol!

Vernski · 03-28-2013, 10:24 PM

Quote:

Originally Posted by KroAutomotiveInc

yeah cant beat the look but i say just use a 4bbl and make it easy on yourself lol!

I put a Edelbrock 1404 manual choke on my 230 it worked good right out of the box. I set it on a Clifford hot water heated intake. The motor has a Mercrusier boat cam and pulls hard from idle on up, plus runs smooth at idle. It also has Langdon Headers. What I would like to run is two Weber 2 barrels [check this link] https://www.cliffordperformance.net/ But that will be when I win the lottery some day. I love the looks of Tri-power I had some on a old 235 but it drove me nuts trying to get 3 carbs in tune. Here is a pic of my 230...Vernski

KroAutomotiveInc · 03-28-2013, 11:47 PM

that is one sweet 230 Vernski you gotta take me for a ride some day!

**slepysal** · 03-29-2013, 12:54 AM

thats sweet Vernski, were did you get your breather cap ?

TJ's Chevy · 03-29-2013, 12:56 AM

That is one awsome 6 cylinder ya got there! Wish mine looked like it.

TJ's Chevy · 03-29-2013, 01:13 AM

Has anybody here ever used the lump port head? And a good cam ta go with
it? I almost made a big mistake in cam selection! Never do that!

Vernski · 03-29-2013, 02:07 AM

Quote:

Originally Posted by slepysal

thats sweet Vernski, were did you get your breather cap ?

I bought the breather cap at either Speedway or Jegs been awhile since I picked it up, oldtimers you know...Vernski

[KRO & TJ] thanks for the thumbs up on the truck...Vernski

[slepysal]

RANDY COX · 03-29-2013, 06:37 AM

Quote:

Originally Posted by Vernski

I put a Edelbrock 1404 manual choke on my 230 it worked good right out of the box. I set it on a Clifford hot water heated intake. The motor has a Mercrusier boat cam and pulls hard from idle on up, plus runs smooth at idle. It also has Langdon Headers. What I would like to run is two Weber 2 barrels [check this link] https://www.cliffordperformance.net/ But that will be when I win the lottery some day. I love the looks of Tri-power I had some on a old 235 but it drove me nuts trying to get 3 carbs in tune. Here is a pic of my 230...Vernski

Vernski,I really Like your truck the engine looks AWESOME,Yrs ago my brother got an old boat it had a 250 six in it,I took it out rebuilt the head on it had it sittin on an stand got me a offenhauser 4-barrell intake and an holley carb,and all hooked up to radiator and let it run to make sure there were no cracks,the engine still had the crosshatch pattern inside of cylinder walls.This was gonna be a candidate for my burb if i needed it,but sold burb yrs ago,still have engine,with the marine cam I bet it would be a good pullin motor,Oh well maybe one day I'll use it...

**chevy_man5** · 03-29-2013, 09:29 AM

Not really tricked out... yet, but here is my sons 292 loaded up and coming home with us.

TJ's Chevy · 03-29-2013, 01:01 PM

Yer 230 look better than my 292! Thats fer sure!

boucher racing · 03-29-2013, 04:35 PM

Quote:

Originally Posted by chevy_man5

Not really tricked out... yet, but here is my sons 292 loaded up and coming home with us.

Hmmmm, I love that Alpine Green, fresh on a clean block. Enjoy it b/c it will never look that good again!

**chevy_man5** · 03-29-2013, 05:12 PM

Question for you all.

The 292 we got is out of a '63, and my sons truck is a '65. According to this chart, in '63 the engine would have been Green, but in '65 it would have been Green-Dark/Gray.

http://www.oldchevytrucks.com/Articles/Engine-Paint.php

What parts would have been Dark Green and which parts would have been Gray? Or is that an either or color? It would have been Dark Green or Gray?

And how much darker would the Green have been?

KroAutomotiveInc · 03-29-2013, 05:24 PM

i was wrong 292's started production in 1962 didnt know that!

KroAutomotiveInc · 03-29-2013, 05:26 PM

i guess the chart shows it in all years tho interesting

TJ's Chevy · 03-29-2013, 06:09 PM

Quote:

Originally Posted by KroAutomotiveInc

i was wrong 292's started production in 1962 didnt know that!

I thought that the 292 came out 1963!

gimmy 64 · 03-29-2013, 08:14 PM

Quote:

Originally Posted by Vernski

I put a Edelbrock 1404 manual choke on my 230 it worked good right out of the box. I set it on a Clifford hot water heated intake. The motor has a Mercrusier boat cam and pulls hard from idle on up, plus runs smooth at idle. It also has Langdon Headers. What I would like to run is two Weber 2 barrels [check this link] https://www.cliffordperformance.net/ But that will be when I win the lottery some day. I love the looks of Tri-power I had some on a old 235 but it drove me nuts trying to get 3 carbs in tune. Here is a pic of my 230...Vernski

DANG Vernski with the new paint job an this motor i figure i will be seeing your'e truck in classics trucks soon !!!!!!!

TJ's Chevy · 03-29-2013, 08:36 PM

Quote:

Originally Posted by chevy_man5

Question for you all.

The 292 we got is out of a '63, and my sons truck is a '65. According to this chart, in '63 the engine would have been Green, but in '65 it would have been Green-Dark/Gray.

http://www.oldchevytrucks.com/Articles/Engine-Paint.php

What parts would have been Dark Green and which parts would have been Gray? Or is that an either or color? It would have been Dark Green or Gray?

And how much darker would the Green have been?

Hey chevy man,
My 66 chevy 1/2 ton has a 292 and it originally was a forest like green.
My 64 chevy 3/4 ton also has a 292 and it was originally blue. hope that helps.

awbrown · 03-29-2013, 08:52 PM

Stovebolt Chevy 6 cylinder dyno runs - YouTube

Vernski ,I did get a trip setup to work , but my friend did most of the work ...progressive linkage that took him 14 hrs to build...

03-24-2013, 10:53 PM	#252
TJ's Chevy Registered User Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: Tricked-out Chevy six cylinder engines [QUOTE=KroAutomotiveInc;5968474]Heres a picture of a split manifold easy way to get dual exhaust also doesn't take away your exhaust heat to the intake. [/Q Just show me the car fax man!

03-25-2013, 03:23 AM	#253
KroAutomotiveInc Registered User Join Date: Jun 2010 Location: UT Posts: 908	Re: Tricked-out Chevy six cylinder engines yeah welding cast is a bit tricky forsure! __________________ Car & Truck Projects Google Community. https://plus.google.com/communities/...80679980403145 Youtube channel. http://www.youtube.com/channel/UC2HB...view_as=public 1964 GMC http://67-72chevytrucks.com/vboard/s...d.php?t=419525

03-25-2013, 11:34 AM	#254
TJ's Chevy Registered User Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: Tricked-out Chevy six cylinder engines OH THE DRAMMA!

03-28-2013, 06:58 PM	#256
TJ's Chevy Registered User Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: Tricked-out Chevy six cylinder engines YA Know its been awfully quiet here........I thinks we need some new hot rod 6 cylinder chevys.

03-28-2013, 11:47 PM	#260
KroAutomotiveInc Registered User Join Date: Jun 2010 Location: UT Posts: 908	Re: Tricked-out Chevy six cylinder engines that is one sweet 230 Vernski you gotta take me for a ride some day! __________________ Car & Truck Projects Google Community. https://plus.google.com/communities/...80679980403145 Youtube channel. http://www.youtube.com/channel/UC2HB...view_as=public 1964 GMC http://67-72chevytrucks.com/vboard/s...d.php?t=419525

03-29-2013, 12:54 AM	#261
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: Tricked-out Chevy six cylinder engines thats sweet Vernski, were did you get your breather cap ? __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... "

03-29-2013, 12:56 AM	#262
TJ's Chevy Registered User Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: Tricked-out Chevy six cylinder engines That is one awsome 6 cylinder ya got there! Wish mine looked like it.

03-29-2013, 01:13 AM	#263
TJ's Chevy Registered User Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: Tricked-out Chevy six cylinder engines Has anybody here ever used the lump port head? And a good cam ta go with it? I almost made a big mistake in cam selection! Never do that!

03-29-2013, 09:29 AM	#266
chevy_man5 GMC's n H.D.'s too! Join Date: Oct 2010 Location: Nampa, Idaho Posts: 1,583	Re: Tricked-out Chevy six cylinder engines Not really tricked out... yet, but here is my sons 292 loaded up and coming home with us. Attached Images __________________ Jason 1960 GMC 4x4 Babe (the Blue Ox) - Build Thread

03-29-2013, 01:01 PM	#267
TJ's Chevy Registered User Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: Tricked-out Chevy six cylinder engines Yer 230 look better than my 292! Thats fer sure!

03-29-2013, 05:12 PM	#269
chevy_man5 GMC's n H.D.'s too! Join Date: Oct 2010 Location: Nampa, Idaho Posts: 1,583	Re: Tricked-out Chevy six cylinder engines Question for you all. The 292 we got is out of a '63, and my sons truck is a '65. According to this chart, in '63 the engine would have been Green, but in '65 it would have been Green-Dark/Gray. http://www.oldchevytrucks.com/Articles/Engine-Paint.php What parts would have been Dark Green and which parts would have been Gray? Or is that an either or color? It would have been Dark Green or Gray? And how much darker would the Green have been? __________________ Jason 1960 GMC 4x4 Babe (the Blue Ox) - Build Thread

03-29-2013, 05:24 PM	#270
KroAutomotiveInc Registered User Join Date: Jun 2010 Location: UT Posts: 908	Re: Tricked-out Chevy six cylinder engines i was wrong 292's started production in 1962 didnt know that! __________________ Car & Truck Projects Google Community. https://plus.google.com/communities/...80679980403145 Youtube channel. http://www.youtube.com/channel/UC2HB...view_as=public 1964 GMC http://67-72chevytrucks.com/vboard/s...d.php?t=419525 Last edited by KroAutomotiveInc; 03-29-2013 at 05:31 PM.

03-29-2013, 05:26 PM	#271
KroAutomotiveInc Registered User Join Date: Jun 2010 Location: UT Posts: 908	Re: Tricked-out Chevy six cylinder engines i guess the chart shows it in all years tho interesting __________________ Car & Truck Projects Google Community. https://plus.google.com/communities/...80679980403145 Youtube channel. http://www.youtube.com/channel/UC2HB...view_as=public 1964 GMC http://67-72chevytrucks.com/vboard/s...d.php?t=419525



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.