My 86 build - Page 11 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

moregrip · 11-03-2019, 10:30 AM

great work! You're extremely talented!

**TKCR** · 11-03-2019, 11:23 AM

Quote:

Originally Posted by moregrip

great work! You're extremely talented!

Thank you! I never thought of myself being talented, just OCD

**TKCR** · 11-04-2019, 02:06 PM

Got the Lower Door Panel Carpets done. Put the stainless steel trim on. Dyed the vents Charcoal.

**TKCR** · 11-09-2019, 09:53 AM

Got the Buckle center belts in. The belts I found were in really nice shape, other than this frayed section. So I cut it off, since it was close to the end, and sewed it back up. That repair is done and all the belts are mounted in the truck.

**TKCR** · 11-11-2019, 02:33 PM

This has been a long time coming, finally got my Jack & Tools mounted, along with a new sticker.

**TKCR** · 11-11-2019, 09:34 PM

My Door Panels arrived this weekend. But before I install them, I’m going to replace my door pins & bushings. I’m waiting on a few tools to help aid with the removal of the pins, and the other tool helps with the placement of the bushing.

**TKCR** · 11-13-2019, 07:08 PM

So the other day, when I installed the Jack Tools where they are mounted on the right side engine room, I noticed the battery try was looking a bit shabby. So I removed it, and I’m going to sandblast it and repaint it, along with the bolts.

**nlped** · 11-13-2019, 10:03 PM

Quote:

Originally Posted by TKCR

So the other day, when I installed the Jack Tools where they are mounted on the right side engine room, I noticed the battery try was looking a bit shabby. So I removed it, and I’m going to sandblast it and repaint it, along with the bolts.

Yep, I did the exact same thing on Belushi.

**TKCR** · 11-14-2019, 08:58 PM

Quote:

Originally Posted by nlped

Yep, I did the exact same thing on Belushi.

Since I have the tray out, I found a bolt missing, the lower radiator support to the inner fender. Shame Shame😮

superdav · 11-15-2019, 11:36 PM

Quote:

Originally Posted by TKCR

This has been a long time coming, finally got my Jack & Tools mounted, along with a new sticker.

where did you find the stickers? nice truck btw

**TKCR** · 11-15-2019, 11:57 PM

Quote:

Originally Posted by superdav

where did you find the stickers? nice truck btw

Well I went to get the receipt to find out, because I’ve had the sticker in an envelope for several years. And I just got it out the other day, and the receipt was with it. I must have mistakenly thrown it away, because I can’t find it now.

**TKCR** · 11-17-2019, 04:47 PM

Had decent day out, so I sandblasted the Tray and Bolts. Spray the tray with undercoating, since it looked like that’s what was on it already. Also got a tray mat and new positive connection. I would like to find an original looking, but this will do until then. All back together!!

superdav · 11-17-2019, 11:19 PM

Quote:

Originally Posted by TKCR

Well I went to get the receipt to find out, because I’ve had the sticker in an envelope for several years. And I just got it out the other day, and the receipt was with it. I must have mistakenly thrown it away, because I can’t find it now.

10-4 if you happen to remember please let me know

**TKCR** · 11-17-2019, 11:27 PM

Quote:

Originally Posted by superdav

10-4 if you happen to remember please let me know

Or if I find the paper, I know I have just misplaced it. I keep everything for my truck.
Update:I found a part # 15594820
https://www.ebay.com/itm/1985-86-CHE...4AAOSwlgJdDnzA

**TKCR** · 11-19-2019, 08:49 PM

Changing out the pins & bushings on the doors. The PO seemed to think it was easier to tack weld the pins to the bottom of the hinge bracket, rather than just put back the C-clip! My brother came up to help, we ended up taking the door off by unbolting the hinge brackets. That gave us a little more room to use a Dremel and grind off the welds. Several hours later, we finally got the pins out!! Well, one door that is! While the door is off, I’m going to clean up the door jamb and do some spray paint touch ups. Another day we will reinstall the door and start the process over again, with the other door. 🥵

**rgunlock** · 11-20-2019, 08:27 AM

That's too bad about changing your pins and bushings turning out to be such a challenge, but the engine bay is looking great with the refreshed battery tray and tire tools!

GRAY GOOSE · 11-20-2019, 11:39 AM

Where did you get your door panels? I am looking for a set of original door panels for my 83. I don't mide if the are not new. I can redo them.

**TKCR** · 11-20-2019, 12:21 PM

Quote:

Originally Posted by GRAY GOOSE

Where did you get your door panels? I am looking for a set of original door panels for my 83. I don't mide if the are not new. I can redo them.

USA1 Industries. They are new

GRAY GOOSE · 11-20-2019, 01:20 PM

Thanks so much. I will take a look.

GRAY GOOSE · 11-22-2019, 04:44 PM

Look good....Time to start saving my pennies!!!!

**TKCR** · 11-22-2019, 09:11 PM

I think I’m going to just replace the entire hinges. I was thinking they may be bent. The PO was using a lot of shims. So I ordered some just to compare them with mine, and I think there is a chance that they are bent. I’m not crazy about using aftermarket hinges, but they seem well made and identical to the OEM.

**TKCR** · 11-22-2019, 09:17 PM

While I was waiting on the new hinges to arrive from Classic Parts, I changed out the SPID in the glove box. I have only had this for about 3-4 yrs. I had it made primarily to change the interior color, from Burgundy to Charcoal, since that’s what I did with the interior. Had the SPID made here: http://outintheshop.com/2.html

**TKCR** · 11-25-2019, 04:48 PM

Got the hinges sandblasted just enough to etch them. Primed and then paint.

GRAY GOOSE · 11-25-2019, 05:36 PM

Nice.. Let us know how they work once installed.

**TKCR** · 11-25-2019, 05:40 PM

Quote:

Originally Posted by GRAY GOOSE

Nice.. Let us know how they work once installed.

Thank you. I will. I’m anxious to get this door back on, and see how everything lines up.

11-03-2019, 10:30 AM	#251
moregrip Registered User Join Date: Dec 2008 Location: Las Vegas, NV Posts: 810	Re: My 86 build great work! You're extremely talented! __________________ 1983 Chevy C10 250/3spd (current project truck) 1976 Chevy C10 350/350 Heavy Half (future project truck)

11-04-2019, 02:06 PM	#253
TKCR Senior Member Join Date: Oct 2014 Location: Ohio Posts: 6,961	Re: My 86 build Got the Lower Door Panel Carpets done. Put the stainless steel trim on. Dyed the vents Charcoal. Attached Images __________________ FB Page for my Seats Belts https://www.facebook.com/73-87-Chevy...9439407476735/ Restoring Seatbelts: http://67-72chevytrucks.com/vboard/s...d.php?t=809750 SOLD My 86 Build:http://67-72chevytrucks.com/vboard/s...d.php?t=654972 Past Restored Bench Seats:http://67-72chevytrucks.com/vboard/s...d.php?t=715398 PayPal link to pay for your items: https://www.paypal.me/TKCR

11-09-2019, 09:53 AM	#254
TKCR Senior Member Join Date: Oct 2014 Location: Ohio Posts: 6,961	Re: My 86 build Got the Buckle center belts in. The belts I found were in really nice shape, other than this frayed section. So I cut it off, since it was close to the end, and sewed it back up. That repair is done and all the belts are mounted in the truck. Attached Images __________________ FB Page for my Seats Belts https://www.facebook.com/73-87-Chevy...9439407476735/ Restoring Seatbelts: http://67-72chevytrucks.com/vboard/s...d.php?t=809750 SOLD My 86 Build:http://67-72chevytrucks.com/vboard/s...d.php?t=654972 Past Restored Bench Seats:http://67-72chevytrucks.com/vboard/s...d.php?t=715398 PayPal link to pay for your items: https://www.paypal.me/TKCR

11-11-2019, 02:33 PM	#255
TKCR Senior Member Join Date: Oct 2014 Location: Ohio Posts: 6,961	Re: My 86 build This has been a long time coming, finally got my Jack & Tools mounted, along with a new sticker. Attached Images __________________ FB Page for my Seats Belts https://www.facebook.com/73-87-Chevy...9439407476735/ Restoring Seatbelts: http://67-72chevytrucks.com/vboard/s...d.php?t=809750 SOLD My 86 Build:http://67-72chevytrucks.com/vboard/s...d.php?t=654972 Past Restored Bench Seats:http://67-72chevytrucks.com/vboard/s...d.php?t=715398 PayPal link to pay for your items: https://www.paypal.me/TKCR

11-11-2019, 09:34 PM	#256
TKCR Senior Member Join Date: Oct 2014 Location: Ohio Posts: 6,961	Re: My 86 build My Door Panels arrived this weekend. But before I install them, I’m going to replace my door pins & bushings. I’m waiting on a few tools to help aid with the removal of the pins, and the other tool helps with the placement of the bushing. Attached Images __________________ FB Page for my Seats Belts https://www.facebook.com/73-87-Chevy...9439407476735/ Restoring Seatbelts: http://67-72chevytrucks.com/vboard/s...d.php?t=809750 SOLD My 86 Build:http://67-72chevytrucks.com/vboard/s...d.php?t=654972 Past Restored Bench Seats:http://67-72chevytrucks.com/vboard/s...d.php?t=715398 PayPal link to pay for your items: https://www.paypal.me/TKCR

11-13-2019, 07:08 PM	#257
TKCR Senior Member Join Date: Oct 2014 Location: Ohio Posts: 6,961	Re: My 86 build So the other day, when I installed the Jack Tools where they are mounted on the right side engine room, I noticed the battery try was looking a bit shabby. So I removed it, and I’m going to sandblast it and repaint it, along with the bolts. Attached Images __________________ FB Page for my Seats Belts https://www.facebook.com/73-87-Chevy...9439407476735/ Restoring Seatbelts: http://67-72chevytrucks.com/vboard/s...d.php?t=809750 SOLD My 86 Build:http://67-72chevytrucks.com/vboard/s...d.php?t=654972 Past Restored Bench Seats:http://67-72chevytrucks.com/vboard/s...d.php?t=715398 PayPal link to pay for your items: https://www.paypal.me/TKCR

11-17-2019, 04:47 PM	#262
TKCR Senior Member Join Date: Oct 2014 Location: Ohio Posts: 6,961	Re: My 86 build Had decent day out, so I sandblasted the Tray and Bolts. Spray the tray with undercoating, since it looked like that’s what was on it already. Also got a tray mat and new positive connection. I would like to find an original looking, but this will do until then. All back together!! Attached Images __________________ FB Page for my Seats Belts https://www.facebook.com/73-87-Chevy...9439407476735/ Restoring Seatbelts: http://67-72chevytrucks.com/vboard/s...d.php?t=809750 SOLD My 86 Build:http://67-72chevytrucks.com/vboard/s...d.php?t=654972 Past Restored Bench Seats:http://67-72chevytrucks.com/vboard/s...d.php?t=715398 PayPal link to pay for your items: https://www.paypal.me/TKCR

11-19-2019, 08:49 PM	#265
TKCR Senior Member Join Date: Oct 2014 Location: Ohio Posts: 6,961	Re: My 86 build Changing out the pins & bushings on the doors. The PO seemed to think it was easier to tack weld the pins to the bottom of the hinge bracket, rather than just put back the C-clip! My brother came up to help, we ended up taking the door off by unbolting the hinge brackets. That gave us a little more room to use a Dremel and grind off the welds. Several hours later, we finally got the pins out!! Well, one door that is! While the door is off, I’m going to clean up the door jamb and do some spray paint touch ups. Another day we will reinstall the door and start the process over again, with the other door. 🥵 Attached Images __________________ FB Page for my Seats Belts https://www.facebook.com/73-87-Chevy...9439407476735/ Restoring Seatbelts: http://67-72chevytrucks.com/vboard/s...d.php?t=809750 SOLD My 86 Build:http://67-72chevytrucks.com/vboard/s...d.php?t=654972 Past Restored Bench Seats:http://67-72chevytrucks.com/vboard/s...d.php?t=715398 PayPal link to pay for your items: https://www.paypal.me/TKCR

11-20-2019, 08:27 AM	#266
rgunlock Senior Member Join Date: Jul 2009 Location: Tomball, Texas Posts: 1,592	Re: My 86 build That's too bad about changing your pins and bushings turning out to be such a challenge, but the engine bay is looking great with the refreshed battery tray and tire tools! __________________ Rick 78 GMC K15 SWB, 350/NV4500/NP205/4.10s Project Hazel 71 GMC C25 350/TH400 - Project Angie 59 Chevy SWB Stepside (next in line? Not sure now ) 2001 GMC Sierra K2500

11-20-2019, 11:39 AM	#267
GRAY GOOSE Registered User Join Date: Dec 2014 Location: MARTINSVILLE VA Posts: 17	Re: My 86 build Where did you get your door panels? I am looking for a set of original door panels for my 83. I don't mide if the are not new. I can redo them. Last edited by GRAY GOOSE; 11-20-2019 at 12:12 PM.

11-20-2019, 01:20 PM	#269
GRAY GOOSE Registered User Join Date: Dec 2014 Location: MARTINSVILLE VA Posts: 17	Re: My 86 build Thanks so much. I will take a look.

11-22-2019, 04:44 PM	#270
GRAY GOOSE Registered User Join Date: Dec 2014 Location: MARTINSVILLE VA Posts: 17	Re: My 86 build Look good....Time to start saving my pennies!!!!

11-22-2019, 09:11 PM	#271
TKCR Senior Member Join Date: Oct 2014 Location: Ohio Posts: 6,961	Re: My 86 build I think I’m going to just replace the entire hinges. I was thinking they may be bent. The PO was using a lot of shims. So I ordered some just to compare them with mine, and I think there is a chance that they are bent. I’m not crazy about using aftermarket hinges, but they seem well made and identical to the OEM. Attached Images __________________ FB Page for my Seats Belts https://www.facebook.com/73-87-Chevy...9439407476735/ Restoring Seatbelts: http://67-72chevytrucks.com/vboard/s...d.php?t=809750 SOLD My 86 Build:http://67-72chevytrucks.com/vboard/s...d.php?t=654972 Past Restored Bench Seats:http://67-72chevytrucks.com/vboard/s...d.php?t=715398 PayPal link to pay for your items: https://www.paypal.me/TKCR

11-22-2019, 09:17 PM	#272
TKCR Senior Member Join Date: Oct 2014 Location: Ohio Posts: 6,961	Re: My 86 build While I was waiting on the new hinges to arrive from Classic Parts, I changed out the SPID in the glove box. I have only had this for about 3-4 yrs. I had it made primarily to change the interior color, from Burgundy to Charcoal, since that’s what I did with the interior. Had the SPID made here: http://outintheshop.com/2.html Attached Images __________________ FB Page for my Seats Belts https://www.facebook.com/73-87-Chevy...9439407476735/ Restoring Seatbelts: http://67-72chevytrucks.com/vboard/s...d.php?t=809750 SOLD My 86 Build:http://67-72chevytrucks.com/vboard/s...d.php?t=654972 Past Restored Bench Seats:http://67-72chevytrucks.com/vboard/s...d.php?t=715398 PayPal link to pay for your items: https://www.paypal.me/TKCR Last edited by TKCR; 11-22-2019 at 11:09 PM.

11-25-2019, 04:48 PM	#273
TKCR Senior Member Join Date: Oct 2014 Location: Ohio Posts: 6,961	Re: My 86 build Got the hinges sandblasted just enough to etch them. Primed and then paint. Attached Images __________________ FB Page for my Seats Belts https://www.facebook.com/73-87-Chevy...9439407476735/ Restoring Seatbelts: http://67-72chevytrucks.com/vboard/s...d.php?t=809750 SOLD My 86 Build:http://67-72chevytrucks.com/vboard/s...d.php?t=654972 Past Restored Bench Seats:http://67-72chevytrucks.com/vboard/s...d.php?t=715398 PayPal link to pay for your items: https://www.paypal.me/TKCR



Register or Log In To remove these advertisements.

11-25-2019, 05:36 PM	#274
GRAY GOOSE Registered User Join Date: Dec 2014 Location: MARTINSVILLE VA Posts: 17	Re: My 86 build Nice.. Let us know how they work once installed.

Register or Log In To remove these advertisements.