New 64 Stepper Project - Page 11 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**The Rocknrod** · 01-21-2019, 01:22 PM

Quote:

Originally Posted by roll_the_dice

I just read your entire thread! Such a beautiful build and attention to detail. Great job.

Hi, thank you. I havnt visited this lately. I'm playing around with which size trans cooler lines I should use either 3/8 or 5/16. I know the factory size in the day was 5/16 but I'm thinking maybe the 3/8 will be better. I'm going with a 200R4 and it uses 1/4npts threads on the cooler outlet and inlet and I found this Dorman 800-754 that I can use inverted flare for there and already have the radiator connection for the 3/8 tube inverted flare there.
Or I can go with AN6 hoses all the way.
Also thinking of buying a crimper to crimp ferrules for hose ends instead of the push on units. I can also use that for the power steering lines if I want.
Need ideas on mounting the trans cooler though.

**The Rocknrod** · 03-09-2019, 07:27 AM

Installed the Retrosund radio and it works well.

cmseaver · 07-03-2019, 12:32 PM

Master Chief, that is a beautiful truck! Outstanding work! Can't wait to see more pictures and see it finished.

**The Rocknrod** · 07-03-2019, 12:40 PM

Thank you. When I get home with my booty (from work) I can finish this project.

knomadd · 07-03-2019, 07:23 PM

Looks great! Keep it up.

**The Rocknrod** · 08-05-2019, 03:09 PM

Bought the Exhaust Manifolds and Valve covers (chrome) plan to get the Mooneyes air cleaner and get it chromed. Have to clean up (smooth) the exhaust man before I get it jet hot cast iron gray.

**The Rocknrod** · 08-05-2019, 03:40 PM

Chrome Booster in the house.

**The Rocknrod** · 08-11-2019, 02:00 PM

Received the chrome hood hinges but I may send them back,one is pretty loose.

**The Rocknrod** · 09-18-2019, 07:43 PM

Purchased the Mooneyes Air Cleaner and had it sent to El Paso Plating direct. Should be there tomorrow afternoon.
Found a 17" Seven blade fan to mate up to a fan clutch clutch.

**The Rocknrod** · 09-27-2019, 07:42 PM

So the Mooneyes air cleaner was returned from El Paso Plating. They did the top and the bottom.

roll_the_dice · 09-27-2019, 08:01 PM

Looks great in the pictures...how does it look in person?

**The Rocknrod** · 09-28-2019, 08:33 AM

Quote:

Originally Posted by roll_the_dice

Looks great in the pictures...how does it look in person?

My wife loves it. I'm out of state working.
What really surprises me is that I bought this from California Car Cover on the 16th. They sent it to El Paso Plating who plated it and sent it home completed in that amount of time.

roll_the_dice · 09-28-2019, 09:06 AM

It does look really good!

That is super fast. I haven't had anything done yet, but I plan on using them also.

Indian113 · 09-28-2019, 09:21 AM

Can't wait to see that air cleaner installed! Bet your getting anxious yourself.

**The Rocknrod** · 09-28-2019, 09:27 AM

Quote:

Originally Posted by roll_the_dice

It does look really good!

That is super fast. I haven't had anything done yet, but I plan on using them also.

I did due to a recommendation I read on this site. So far so good.

Quote:

Originally Posted by Indian113

Can't wait to see that air cleaner installed! Bet your getting anxious yourself.

That's a fact. I'll be home Christmas to fawn over my booty.

Should be at my $$ goal for the truck completion by then, but then I have to work probably another year out here to be set for a while.

**The Rocknrod** · 09-28-2019, 09:34 AM

Another pic of the top. I like the cast aluminum, not billet. However I don't like to polish the stuff, so...

**The Rocknrod** · 10-27-2019, 11:24 AM

So I'm looking at the Hedman 69830's with 3/8" flanges. I see they have fit well on newer trucks, any comments on if they will be a problem on ours? - http://67-72chevytrucks.com/vboard/s...d.php?t=353842

**The Rocknrod** · 11-16-2019, 03:15 PM

So I bought a pair of these and sent them home (still on the road). They are 5" or 5.25" long perfect for a key fob that wont scratch the dash.

**The Rocknrod** · 12-30-2019, 10:09 AM

While I was at home for Christmas I changed out my hood hinges and brake booster. Had to set the booster to master cylinder dimensions, but it all worked out.

66farmer · 12-30-2019, 10:48 AM

That is super clean

**The Rocknrod** · 12-30-2019, 12:17 PM

Coming from you that means a lot. Yours is a killer truck!

88Stanger · 01-13-2020, 05:07 PM

Nice work sir! I look forward to your updates

**The Rocknrod** · 01-13-2020, 07:16 PM

Quote:

Originally Posted by 88Stanger

Nice work sir! I look forward to your updates

Thank you. Me too.

**The Rocknrod** · 01-28-2020, 05:08 PM

Got a goody in the mail (new never used).

cookseyb · 02-01-2020, 05:51 PM

Great job from one Power Plant road whore to another!

03-09-2019, 07:27 AM	#252
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project Installed the Retrosund radio and it works well. Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

07-03-2019, 12:32 PM	#253
cmseaver Registered User Join Date: Apr 2013 Location: Orem, UT Posts: 9	Re: New 64 Stepper Project Master Chief, that is a beautiful truck! Outstanding work! Can't wait to see more pictures and see it finished.

07-03-2019, 12:40 PM	#254
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project Thank you. When I get home with my booty (from work) I can finish this project. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

07-03-2019, 07:23 PM	#255
knomadd Registered User Join Date: Jul 2012 Location: Rosenberg, Texas Posts: 3,506	Re: New 64 Stepper Project Looks great! Keep it up. __________________ -Duane C/10 Club Texas member 1971 Chevy C10 "Brutus" SWB Fleetside 2016 6.0L (L96) 6L90E (driver/project) 1965 Pontiac GTO "Royal Goat" 400/TH400 w/AC (my baby)

08-05-2019, 03:09 PM	#256
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project Bought the Exhaust Manifolds and Valve covers (chrome) plan to get the Mooneyes air cleaner and get it chromed. Have to clean up (smooth) the exhaust man before I get it jet hot cast iron gray. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats? Last edited by The Rocknrod; 08-06-2019 at 07:53 PM.

08-05-2019, 03:40 PM	#257
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project Chrome Booster in the house. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

08-11-2019, 02:00 PM	#258
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project Received the chrome hood hinges but I may send them back,one is pretty loose. Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

09-18-2019, 07:43 PM	#259
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project Purchased the Mooneyes Air Cleaner and had it sent to El Paso Plating direct. Should be there tomorrow afternoon. Found a 17" Seven blade fan to mate up to a fan clutch clutch. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

09-27-2019, 07:42 PM	#260
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project So the Mooneyes air cleaner was returned from El Paso Plating. They did the top and the bottom. Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

09-27-2019, 08:01 PM	#261
roll_the_dice Registered User Join Date: Mar 2016 Location: Manlius, NY Posts: 1,698	Re: New 64 Stepper Project Looks great in the pictures...how does it look in person? __________________ 1965 C10 LWB Stepside 1964 GMC 1 Ton Dually Instagram #notaratrodnotashowtruck

09-28-2019, 09:06 AM	#263
roll_the_dice Registered User Join Date: Mar 2016 Location: Manlius, NY Posts: 1,698	Re: New 64 Stepper Project It does look really good! That is super fast. I haven't had anything done yet, but I plan on using them also. __________________ 1965 C10 LWB Stepside 1964 GMC 1 Ton Dually Instagram #notaratrodnotashowtruck

09-28-2019, 09:21 AM	#264
Indian113 Registered User Join Date: Sep 2009 Location: Monroe,Iowa Posts: 4,370	Re: New 64 Stepper Project Can't wait to see that air cleaner installed! Bet your getting anxious yourself.

09-28-2019, 09:34 AM	#266
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project Another pic of the top. I like the cast aluminum, not billet. However I don't like to polish the stuff, so... Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

10-27-2019, 11:24 AM	#267
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project So I'm looking at the Hedman 69830's with 3/8" flanges. I see they have fit well on newer trucks, any comments on if they will be a problem on ours? - http://67-72chevytrucks.com/vboard/s...d.php?t=353842 __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

11-16-2019, 03:15 PM	#268
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project So I bought a pair of these and sent them home (still on the road). They are 5" or 5.25" long perfect for a key fob that wont scratch the dash. Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?



Register or Log In To remove these advertisements.

12-30-2019, 10:09 AM	#269
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project While I was at home for Christmas I changed out my hood hinges and brake booster. Had to set the booster to master cylinder dimensions, but it all worked out. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

12-30-2019, 10:48 AM	#270
66farmer Registered User Join Date: Jun 2007 Location: North Plains Oregon Posts: 684	Re: New 64 Stepper Project That is super clean

12-30-2019, 12:17 PM	#271
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project Coming from you that means a lot. Yours is a killer truck! __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

01-13-2020, 05:07 PM	#272
88Stanger Registered User Join Date: Mar 2015 Location: Washington State Posts: 1,651	Re: New 64 Stepper Project Nice work sir! I look forward to your updates

01-28-2020, 05:08 PM	#274
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project Got a goody in the mail (new never used). __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

02-01-2020, 05:51 PM	#275
cookseyb Registered User Join Date: Jan 2011 Location: Mullin, Texas Posts: 16	Re: New 64 Stepper Project Great job from one Power Plant road whore to another!

Register or Log In To remove these advertisements.