my 86 Backhalf'd SWB c10 - Page 11 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

draggin86 · 08-24-2011, 02:31 AM

Quote:

Originally Posted by bbbc10

are those 24s?

No they are just 20's! they do look big!

menace121978 · 08-24-2011, 05:03 AM

thats what she said!

looking sick bro

bbbc10 · 08-24-2011, 06:36 AM

yea they look big!! sick!! wht is the specs? reverse lip or stantard lip?

draggin86 · 08-24-2011, 01:57 PM

The wheels specs are Raceline A.L. rolled lip fronts are 20x8.5" with 5.25 backspace anyone who is running a dropmember with 8.5" wide wheels should use that backspace per Nate the rears are 20x10 also with 5.25 backspace

The wheels might get some powder coating thinking either gloss black lip with matte black centers or a matte metallic grey center..

luifer76 · 08-24-2011, 03:23 PM

Sick ass wheels bro they look bigger than 20's tho.......thumbs up bro.....

bbbc10 · 08-24-2011, 05:49 PM

jus plain sexy!!! was thinkin bout the same wheels 4 my truck

Nobaddaze · 08-24-2011, 06:35 PM

wheels are kick a$$! im kinda diggin the black valve covers too. maybe anodize your flame etched set? Just an idea.

draggin86 · 08-25-2011, 04:16 PM

Thanks so much guys! the wheels are great and i got them at a great deal! thanks to Raceline Wheels. I wish i could run those flame valve covers but they are too tall i need to find a shorter set.

Gordonr1973 · 08-26-2011, 01:32 PM

Everything is looking great so far!!!

Love those rims!

my4by2 · 08-26-2011, 08:39 PM

WOW man, gorgeous truck & awesome thread! Looking forward to more pics of this one!

64shortc10 · 08-28-2011, 06:27 PM

Rims look SICK! Only 20's you better be putting some tall rubber on those!
Keep it going!
Tony from Norcal

mooseknuckles · 08-28-2011, 06:40 PM

love the wheels..

draggin86 · 08-30-2011, 01:30 AM

thanks a ton guys!! i am planning on putting a nice size tire on them for sure!

I really like the size Mythstryker is running

20x8.5 Front - 245/35/20
20x10 Rear - 295/35/20

muthstryker · 08-30-2011, 10:15 AM

Sometimes I wish I would of just kept those wheels and not had 22s made. Would of been alot further along with my build! My only regret with that setup was the front tire, I should of ran a 245/40/20 for a little bit more side wall, there was almost a 2" difference in the tire hieghts from front to rear. So keep that in mind... Also the smallest bump in the road seemed alot bigger. I would run a 245/40/20 Front and a 295/35/20 Rear if I were you.

draggin86 · 08-30-2011, 02:26 PM

Hey Myth i was thinking about that that i wanted some a little larger on the front of the truck. I would have loved to run 22's on my truck but i dont think the truck quite has enough on the notch to lay it properly with a nice tire!

draggin86 · 09-01-2011, 12:54 AM

A little test fit before i changed out the oil pan and pickup!

couldnt get it all the way up because the fenders are not cut yet..

smokedat · 09-01-2011, 01:20 AM

tukin balls deep. looks good

**lolife99** · 09-01-2011, 08:01 AM

Looking good!
I think a set of 255/40 and 295/40 Toyo Proxes II's would look perfect on those wheels.
You have room for some sidewall.

muthstryker · 09-01-2011, 12:18 PM

I think thats a little too much sidewall for a truck thats bagged.. Thats almost 5 inches of sidewall all around. The lower you go, the bigger the tire will look, the smaller the wheels will look.

*project 67 sub* · 09-01-2011, 12:50 PM

some 255/35's would be good on the front.... thats what i run all the way around on my burb

luifer76 · 09-01-2011, 02:18 PM

the truck looks good with the wheels bro......

chrohm · 10-08-2011, 03:02 PM

are you putting front fenders on or leaving them off?
<~just bought a laid 86 swb

draggin86 · 10-09-2011, 07:42 PM

Quote:

Originally Posted by chrohm

are you putting front fenders on or leaving them off?
<~just bought a laid 86 swb

If you are referring to inner fenders. Yes i am going to be putting custom ones in that i built.

aggie91 · 01-09-2012, 01:50 PM

love this build. Can't wait to see more pics with the compelt body on.
The color looks great!
Posted via Mobile Device

draggin86 · 01-10-2012, 03:25 AM

more body work has begin!

08-24-2011, 05:03 AM	#252
menace121978 Registered User Join Date: Jan 2009 Location: orangevale, ca Posts: 3,626	Re: my 86 Backhalf'd SWB c10 thats what she said! looking sick bro __________________ "Dennis the Menace" 1978 Silverado (2wd, 1/2 ton, short bed)complete nut & bolt frame off restomod LQ9/4L80E MY LS SWAP/FRAME OFF BUILD BOOK 2006 TBSS way too much to list

08-24-2011, 06:36 AM	#253
bbbc10 Diggin The SquareLife Join Date: Dec 2010 Location: garland,tx Posts: 1,933	Re: my 86 Backhalf'd SWB c10 yea they look big!! sick!! wht is the specs? reverse lip or stantard lip?

08-24-2011, 01:57 PM	#254
draggin86 Registered User Join Date: Aug 2004 Location: Folsom, Ca Posts: 573	Re: my 86 Backhalf'd SWB c10 The wheels specs are Raceline A.L. rolled lip fronts are 20x8.5" with 5.25 backspace anyone who is running a dropmember with 8.5" wide wheels should use that backspace per Nate the rears are 20x10 also with 5.25 backspace The wheels might get some powder coating thinking either gloss black lip with matte black centers or a matte metallic grey center.. __________________ My build thread. Boy what did i get myself into!

08-24-2011, 03:23 PM	#255
luifer76 Registered User Join Date: Jul 2010 Location: Southern California CA Posts: 1,088	Re: my 86 Backhalf'd SWB c10 Sick ass wheels bro they look bigger than 20's tho.......thumbs up bro..... __________________ nOtHiNg LiKe ThE gOoD oLe ChEvYs....

08-24-2011, 05:49 PM	#256
bbbc10 Diggin The SquareLife Join Date: Dec 2010 Location: garland,tx Posts: 1,933	Re: my 86 Backhalf'd SWB c10 jus plain sexy!!! was thinkin bout the same wheels 4 my truck

08-24-2011, 06:35 PM	#257
Nobaddaze Registered User Join Date: Sep 2010 Location: Gilbert, Az Posts: 350	Re: my 86 Backhalf'd SWB c10 wheels are kick a$$! im kinda diggin the black valve covers too. maybe anodize your flame etched set? Just an idea. __________________ Hard work has a future payoff. Laziness pays off now. My Build

08-25-2011, 04:16 PM	#258
draggin86 Registered User Join Date: Aug 2004 Location: Folsom, Ca Posts: 573	Re: my 86 Backhalf'd SWB c10 Thanks so much guys! the wheels are great and i got them at a great deal! thanks to Raceline Wheels. I wish i could run those flame valve covers but they are too tall i need to find a shorter set. __________________ My build thread. Boy what did i get myself into!

08-26-2011, 01:32 PM	#259
Gordonr1973 Home Built '87 Join Date: May 2010 Location: Calgary, Alberta Canada Posts: 1,829	Re: my 86 Backhalf'd SWB c10 Everything is looking great so far!!! Love those rims! __________________ Gordon 1998 White Chev ext cab 2WD (Summer Project) http://67-72chevytrucks.com/vboard/s...d.php?t=408424 1987 Chev Silverado SWB (Winter Project Rebuild) http://67-72chevytrucks.com/vboard/s...d.php?t=424833 Truck Club http://67-72chevytrucks.com/vboard/s...d.php?t=466969

08-26-2011, 08:39 PM	#260
my4by2 Registered User Join Date: Dec 2010 Location: Hot Springs, AR. Posts: 1,215	Re: my 86 Backhalf'd SWB c10 WOW man, gorgeous truck & awesome thread! Looking forward to more pics of this one! __________________ 1977 Chevrolet K30 LWB Crew Cab 497HP Mast Motorsports 6.0L LY6 HO engine GM NV4500 5-speed, Centerforce clutch + NP205 D60 + 14-bolt FF w/ Eaton posi + disc brakes Skyjacker 2.5" full spring lift w/ Nitro shocks Custom paint + interior http://67-72chevytrucks.com/vboard/s...d.php?t=435722

08-28-2011, 06:27 PM	#261
64shortc10 Registered User Join Date: Jan 2007 Location: Winters, Ca. Posts: 1,069	Re: my 86 Backhalf'd SWB c10 Rims look SICK! Only 20's you better be putting some tall rubber on those! Keep it going! Tony from Norcal

08-28-2011, 06:40 PM	#262
mooseknuckles Registered User Join Date: Sep 2009 Location: ottawa,canada Posts: 4,550	Re: my 86 Backhalf'd SWB c10 love the wheels.. __________________ my build threads '86 C10 http://67-72chevytrucks.com/vboard/s...d.php?t=415628 '67 C10 http://67-72chevytrucks.com/vboard/s...d.php?t=635078 '63 GMC http://67-72chevytrucks.com/vboard/s...d.php?t=674682

08-30-2011, 01:30 AM	#263
draggin86 Registered User Join Date: Aug 2004 Location: Folsom, Ca Posts: 573	Re: my 86 Backhalf'd SWB c10 thanks a ton guys!! i am planning on putting a nice size tire on them for sure! I really like the size Mythstryker is running 20x8.5 Front - 245/35/20 20x10 Rear - 295/35/20 __________________ My build thread. Boy what did i get myself into!

08-30-2011, 10:15 AM	#264
muthstryker Registered User Join Date: Dec 2009 Location: Snohomish, Washington Posts: 1,187	Re: my 86 Backhalf'd SWB c10 Sometimes I wish I would of just kept those wheels and not had 22s made. Would of been alot further along with my build! My only regret with that setup was the front tire, I should of ran a 245/40/20 for a little bit more side wall, there was almost a 2" difference in the tire hieghts from front to rear. So keep that in mind... Also the smallest bump in the road seemed alot bigger. I would run a 245/40/20 Front and a 295/35/20 Rear if I were you.

08-30-2011, 02:26 PM	#265
draggin86 Registered User Join Date: Aug 2004 Location: Folsom, Ca Posts: 573	Re: my 86 Backhalf'd SWB c10 Hey Myth i was thinking about that that i wanted some a little larger on the front of the truck. I would have loved to run 22's on my truck but i dont think the truck quite has enough on the notch to lay it properly with a nice tire! __________________ My build thread. Boy what did i get myself into!

09-01-2011, 12:54 AM	#266
draggin86 Registered User Join Date: Aug 2004 Location: Folsom, Ca Posts: 573	Re: my 86 Backhalf'd SWB c10 A little test fit before i changed out the oil pan and pickup! couldnt get it all the way up because the fenders are not cut yet.. __________________ My build thread. Boy what did i get myself into!



Register or Log In To remove these advertisements.

09-01-2011, 01:20 AM	#267
smokedat Registered User Join Date: Nov 2009 Location: santa paula Ca Posts: 772	Re: my 86 Backhalf'd SWB c10 tukin balls deep. looks good

09-01-2011, 08:01 AM	#268
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,699	Re: my 86 Backhalf'd SWB c10 Looking good! I think a set of 255/40 and 295/40 Toyo Proxes II's would look perfect on those wheels. You have room for some sidewall. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

09-01-2011, 12:18 PM	#269
muthstryker Registered User Join Date: Dec 2009 Location: Snohomish, Washington Posts: 1,187	Re: my 86 Backhalf'd SWB c10 I think thats a little too much sidewall for a truck thats bagged.. Thats almost 5 inches of sidewall all around. The lower you go, the bigger the tire will look, the smaller the wheels will look.

09-01-2011, 12:50 PM	#270
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: my 86 Backhalf'd SWB c10 some 255/35's would be good on the front.... thats what i run all the way around on my burb

09-01-2011, 02:18 PM	#271
luifer76 Registered User Join Date: Jul 2010 Location: Southern California CA Posts: 1,088	Re: my 86 Backhalf'd SWB c10 the truck looks good with the wheels bro...... __________________ nOtHiNg LiKe ThE gOoD oLe ChEvYs....

10-08-2011, 03:02 PM	#272
chrohm Registered User Join Date: Sep 2011 Location: longview, texas Posts: 28	Re: my 86 Backhalf'd SWB c10 are you putting front fenders on or leaving them off? <~just bought a laid 86 swb

01-09-2012, 01:50 PM	#274
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: my 86 Backhalf'd SWB c10 love this build. Can't wait to see more pics with the compelt body on. The color looks great! Posted via Mobile Device __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square

01-10-2012, 03:25 AM	#275
draggin86 Registered User Join Date: Aug 2004 Location: Folsom, Ca Posts: 573	Re: my 86 Backhalf'd SWB c10 more body work has begin! __________________ My build thread. Boy what did i get myself into!

Register or Log In To remove these advertisements.