'66 Longbed 327 w/AC project - Page 11 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Modges'66 · 10-02-2013, 07:22 PM

WOW!
The splash shields look awesome!
Fake flower greening clips? Are those the staple thingy's
Where do I get them? I was just gonna glue mine on, and/or safety wire them & twist them on the back side!
Those look fantastic!

1963c-10 · 10-03-2013, 01:23 PM

Where did you get the mounting tabs for the splash shields? Holds them to the fenders? Paint is looking great as is the truck.

McMurphy · 10-03-2013, 03:51 PM

Quote:

Originally Posted by Modges'66

WOW!
The splash shields look awesome!
Fake flower greening clips? Are those the staple thingy's
Where do I get them? I was just gonna glue mine on, and/or safety wire them & twist them on the back side!
Those look fantastic!

Yeah me too! Ditto to everything he just said !!

**jayoldschool** · 10-03-2013, 05:12 PM

This truck is going to be completed before the old trim is mounted on my truck!

Keep it up, it's looking great!

cortcomp · 10-03-2013, 05:39 PM

Thanks guys!

For the metal panel mounting clips, i had another thread people helped with:

http://67-72chevytrucks.com/vboard/s...d.php?t=594044

and ended up getting 12 from classic (4 for the panel you see and 2 for the L-shaped bracket that i don't have on yet that goes across the top, per side:

http://www.classicparts.com/1960-66-.../#.Uk3hyiSkq2Z

Just put them in the hole with the parts line up and squeeze with pliers, and the other end opens and holds them together.

The metal staples you can get the correct ones from lots of vendors, they used them on gm cars forever. I used the correct ones on my 71 pontiac, but they were a PITA to do on the inner fenders...the staples are stiff and no length on the staple ends side to bend with pliers, so you need two guys to do them.

These are long and softer, so i just lined up the rubber and drilled in the existing metal holes with a tiny drill bit to pierce the rubber, inserted the greening pins, and bent them over one by one on the other side. When done, i trimmed the excess with side cutters, laid the panel on the bench and tapped them down a little more lightly with the hammer to be sure they were snug.

I found the idea from someone else on here actually, i just can't find the thread at the moment! After working with the original staples, i knew this was the way to go.

I got mine from Michael's craft store (they also sell the green krylon paint, satin jade, for the dash cluster metal case, and silver paint pens for doing trim work on other gauges i had...) I'm sure any craft store like that has them.

Anyways, look for fake flowers and styrofoam shapes and they're near there...here's a pic of them and the box. It was 1.99 for a box of $50. Usually like 12 staples is $6 from the resto-houses.

This forum really is a wealth of ideas, i'm just stealing them all to put into my truck

cortcomp · 10-03-2013, 05:43 PM

AND found it, slorio was where i got the idea:

http://67-72chevytrucks.com/vboard/s....php?p=4309938

Modges'66 · 10-03-2013, 08:55 PM

Totally Outstanding!
I greatly appreciate the info!!!

McMurphy · 10-05-2013, 01:46 PM

Dang .... Modges keeps beating me to it....
Sending the wife into town today to pick me up some as well since my outer fenders are getting closer to being the next project I tackle....

plainred65 · 10-05-2013, 04:39 PM

Just found this thread, truck looks great!

cortcomp · 10-05-2013, 08:56 PM

Thanks! I did the L shaped brackets that go above those with the same clips today and some inner fender seal, everything there is about done until i get the fenders on, and put the little top metal brackets on after that. Started work on the hood today too.

cortcomp · 11-25-2013, 08:59 PM

Had a chance to finish prepping the inside of the hood for 30% gloss black and get it sprayed.

**clemdaddy** · 11-25-2013, 09:19 PM

looking fantastic and nice detail work.
all the time invested really shows off.
are you shooting single stage? very rich color... my next truck is going to be that green and white. beautiful.

cortcomp · 11-26-2013, 04:05 PM

Thanks and that hood underside is single stage centauri, no clear, 30% gloss mixed 8:1:2 per the can. The rest of the truck we are shooting in single stage centauri, little thinner on the paint than the 8:1:2, and using nason clear over it 2 coats, mixed per the can. I am happy with it. if shooting metallic, i wouldn't thin the paint any more than the can says, but i'd still use clear over (and i plan on doing that with a quick resquirt of my 66 catalina that someone did in nason metallic but the finish is pretty matte.) I didn't want to spray any clear under the hood because the 30% gloss is already pretty glossy compared to stock i feel. Paint jobber said that the hardender kind of counter acts the flattening agent, and temp, shooting conditions, etc can affect how flat it ends up being.

Anyways, you can tell as you're painting that it's a brown based black. I'm told there is a blacker pure black that you'd want to use on the outside of a car that apparently makes a difference?

cortcomp · 12-01-2013, 10:07 PM

Did the color on the hood today, and the second fender cover that we never did clear, and the windshield cowl panel...check it all out tomorrow, if no respray work done, then done with all panels except the bed!

Phlebmaster · 12-01-2013, 10:11 PM

Wow!! Very nice work on the paint. Subscribed...this is inspiration for my 64 GMC.

Keep it up!!

**clemdaddy** · 12-03-2013, 08:56 AM

that looks great... really smooth.

cortcomp · 12-03-2013, 12:12 PM

Thanks guys! I will be taking the bottom masking off later hopefully, doing some quick touch ups if any overspray got through, and then the fun (for me anyways) part begins: i get to start putting the parking lights in, new rubber and clips, wiring harness, etc to make the hood complete. I LOVE assembling with new parts.

McMurphy · 12-03-2013, 05:48 PM

Quote:

Originally Posted by cortcomp

Thanks guys! I will be taking the bottom masking off later hopefully, doing some quick touch ups if any overspray got through, and then the fun (for me anyways) part begins: i get to start putting the parking lights in, new rubber and clips, wiring harness, etc to make the hood complete. I LOVE assembling with new parts.

I totally understand and can echo that statement about new parts and assembly !!

Probably going to do some of that today my own self.

cortcomp · 12-03-2013, 08:33 PM

I had filled the front panel seam with seam sealer and wiped it with a gloved finger. I wanted the crease to remain there so it looked normal, but not as deep as it is factory. I did the same on the fenders where the front black piece is spot welded to the white/green rest of the fender. I like the look and think it works well.

Also, did inside the nose holes with black and masked it off, looks like it came out well. I'm not a fan when they're just overspray of body color. They look good body color, or black, but just kind of off color overspray looks bad, especially on the front of the vehicle, one of the most looked at areas. I have some hand touch up to do in there, but it looks like the tape kept 99.99% out.

cortcomp · 12-07-2013, 07:25 PM

Started some assembly on the hood today and ran into some questions:

http://67-72chevytrucks.com/vboard/s...d.php?t=607123

Grinding off the pin allowed me to take the hing apart for paint. I made a new spring (2 actually) from a coat hanger, and found workable springs to replace the other ones in the latch setup. For the hinge pin in the latch, i found a simple locking pin that i took the wire off of, and i will drill a hole in the end once assembled and put a cotter pin through it. It won't be totally stock but clean, with clean lube, painted black and shiny springs should make it look new and work smoothly. Still confused on how/where some of the rubber pieces go.

TJ's Chevy · 12-07-2013, 08:15 PM

drool drool drool....that hood is a die for! lol!

cortcomp · 12-08-2013, 12:00 PM

Hey thanks! It's not perfect, i have some touch up to do around the lower lip and some orange peel i have to sand on the nose section...and there are some dirt specs i'll be cleaning up, but i appreciate the compliments! The photos always miss the flaws and make every piece come out perfect, but i know where all the problems are even if you guys don't catch them

TJ's Chevy · 12-08-2013, 12:21 PM

Well it came out a heck of alot better then my hood did!!! lol! I won't tell you about it!

cortcomp · 12-08-2013, 02:46 PM

I finished doing the homemade latch today, i think one spring doesn't belong, think PO put it there because main spring broke. Coat hanger spring worked great! very firm!

Here's more on that, i STILL don't know where all the rubber in the kit goes

http://67-72chevytrucks.com/vboard/s....php?p=6407936

**jayoldschool** · 12-08-2013, 10:11 PM

Looking great, my friend. Can't wait to see the new trim on it!

10-02-2013, 07:22 PM	#251
Modges'66 Registered User Join Date: Feb 2012 Location: Grand Rapids, Michigan, otherwise known as Beer City U.S.A. Posts: 1,081	Re: '66 Longbed 327 w/AC project WOW! The splash shields look awesome! Fake flower greening clips? Are those the staple thingy's Where do I get them? I was just gonna glue mine on, and/or safety wire them & twist them on the back side! Those look fantastic! __________________ My Build: http://67-72chevytrucks.com/vboard/s...d.php?t=512904

10-03-2013, 01:23 PM	#252
1963c-10 Registered User Join Date: Nov 2011 Location: fayetteville nc Posts: 10,338	Re: '66 Longbed 327 w/AC project Where did you get the mounting tabs for the splash shields? Holds them to the fenders? Paint is looking great as is the truck. __________________ 1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer

10-03-2013, 05:12 PM	#254
jayoldschool Moderator Join Date: Dec 2012 Location: ON, Canada Posts: 2,168	Re: '66 Longbed 327 w/AC project This truck is going to be completed before the old trim is mounted on my truck! Keep it up, it's looking great!

10-03-2013, 05:39 PM	#255
cortcomp Registered User Join Date: Oct 2012 Location: cortland, oh Posts: 792	Re: '66 Longbed 327 w/AC project Thanks guys! For the metal panel mounting clips, i had another thread people helped with: http://67-72chevytrucks.com/vboard/s...d.php?t=594044 and ended up getting 12 from classic (4 for the panel you see and 2 for the L-shaped bracket that i don't have on yet that goes across the top, per side: http://www.classicparts.com/1960-66-.../#.Uk3hyiSkq2Z Just put them in the hole with the parts line up and squeeze with pliers, and the other end opens and holds them together. The metal staples you can get the correct ones from lots of vendors, they used them on gm cars forever. I used the correct ones on my 71 pontiac, but they were a PITA to do on the inner fenders...the staples are stiff and no length on the staple ends side to bend with pliers, so you need two guys to do them. These are long and softer, so i just lined up the rubber and drilled in the existing metal holes with a tiny drill bit to pierce the rubber, inserted the greening pins, and bent them over one by one on the other side. When done, i trimmed the excess with side cutters, laid the panel on the bench and tapped them down a little more lightly with the hammer to be sure they were snug. I found the idea from someone else on here actually, i just can't find the thread at the moment! After working with the original staples, i knew this was the way to go. I got mine from Michael's craft store (they also sell the green krylon paint, satin jade, for the dash cluster metal case, and silver paint pens for doing trim work on other gauges i had...) I'm sure any craft store like that has them. Anyways, look for fake flowers and styrofoam shapes and they're near there...here's a pic of them and the box. It was 1.99 for a box of $50. Usually like 12 staples is $6 from the resto-houses. This forum really is a wealth of ideas, i'm just stealing them all to put into my truck Attached Images __________________ Project "i'm just going to clean up the interior and the engine bay": http://67-72chevytrucks.com/vboard/s...d.php?t=550931 Last edited by cortcomp; 10-03-2013 at 05:44 PM.

10-03-2013, 05:43 PM	#256
cortcomp Registered User Join Date: Oct 2012 Location: cortland, oh Posts: 792	Re: '66 Longbed 327 w/AC project AND found it, slorio was where i got the idea: http://67-72chevytrucks.com/vboard/s....php?p=4309938 __________________ Project "i'm just going to clean up the interior and the engine bay": http://67-72chevytrucks.com/vboard/s...d.php?t=550931

10-03-2013, 08:55 PM	#257
Modges'66 Registered User Join Date: Feb 2012 Location: Grand Rapids, Michigan, otherwise known as Beer City U.S.A. Posts: 1,081	Re: '66 Longbed 327 w/AC project Totally Outstanding! I greatly appreciate the info!!! __________________ My Build: http://67-72chevytrucks.com/vboard/s...d.php?t=512904

10-05-2013, 01:46 PM	#258
McMurphy Registered User Join Date: Sep 2011 Location: Tacoma, WA Posts: 2,425	Re: '66 Longbed 327 w/AC project Dang .... Modges keeps beating me to it.... Sending the wife into town today to pick me up some as well since my outer fenders are getting closer to being the next project I tackle.... __________________ Michael McMurphy My 66 Stepside My 64 Tow Truck My 66 Tempest Table Of Contents Added to Page1

10-05-2013, 04:39 PM	#259
plainred65 Registered User Join Date: Apr 2012 Location: Beaver, Pa. Posts: 197	Re: '66 Longbed 327 w/AC project Just found this thread, truck looks great!

10-05-2013, 08:56 PM	#260
cortcomp Registered User Join Date: Oct 2012 Location: cortland, oh Posts: 792	Re: '66 Longbed 327 w/AC project Thanks! I did the L shaped brackets that go above those with the same clips today and some inner fender seal, everything there is about done until i get the fenders on, and put the little top metal brackets on after that. Started work on the hood today too. __________________ Project "i'm just going to clean up the interior and the engine bay": http://67-72chevytrucks.com/vboard/s...d.php?t=550931

11-25-2013, 08:59 PM	#261
cortcomp Registered User Join Date: Oct 2012 Location: cortland, oh Posts: 792	Re: '66 Longbed 327 w/AC project Had a chance to finish prepping the inside of the hood for 30% gloss black and get it sprayed. Attached Images __________________ Project "i'm just going to clean up the interior and the engine bay": http://67-72chevytrucks.com/vboard/s...d.php?t=550931

11-25-2013, 09:19 PM	#262
clemdaddy Senior Member Join Date: Oct 2009 Location: Fayetteville, Arkansas Posts: 1,923	Re: '66 Longbed 327 w/AC project looking fantastic and nice detail work. all the time invested really shows off. are you shooting single stage? very rich color... my next truck is going to be that green and white. beautiful.

11-26-2013, 04:05 PM	#263
cortcomp Registered User Join Date: Oct 2012 Location: cortland, oh Posts: 792	Re: '66 Longbed 327 w/AC project Thanks and that hood underside is single stage centauri, no clear, 30% gloss mixed 8:1:2 per the can. The rest of the truck we are shooting in single stage centauri, little thinner on the paint than the 8:1:2, and using nason clear over it 2 coats, mixed per the can. I am happy with it. if shooting metallic, i wouldn't thin the paint any more than the can says, but i'd still use clear over (and i plan on doing that with a quick resquirt of my 66 catalina that someone did in nason metallic but the finish is pretty matte.) I didn't want to spray any clear under the hood because the 30% gloss is already pretty glossy compared to stock i feel. Paint jobber said that the hardender kind of counter acts the flattening agent, and temp, shooting conditions, etc can affect how flat it ends up being. Anyways, you can tell as you're painting that it's a brown based black. I'm told there is a blacker pure black that you'd want to use on the outside of a car that apparently makes a difference? __________________ Project "i'm just going to clean up the interior and the engine bay": http://67-72chevytrucks.com/vboard/s...d.php?t=550931

12-01-2013, 10:07 PM	#264
cortcomp Registered User Join Date: Oct 2012 Location: cortland, oh Posts: 792	Re: '66 Longbed 327 w/AC project Did the color on the hood today, and the second fender cover that we never did clear, and the windshield cowl panel...check it all out tomorrow, if no respray work done, then done with all panels except the bed! Attached Images __________________ Project "i'm just going to clean up the interior and the engine bay": http://67-72chevytrucks.com/vboard/s...d.php?t=550931

12-01-2013, 10:11 PM	#265
Phlebmaster Registered User Join Date: Nov 2009 Location: Oregon City, OR Posts: 146	Re: '66 Longbed 327 w/AC project Wow!! Very nice work on the paint. Subscribed...this is inspiration for my 64 GMC. Keep it up!! __________________ Thanks, Aaron Life is about making dreams come true, stop dreaming and make life happen. 64 GMC Project MY_YOUTUBE_VIDEOS To keep an opened mind- speculation is devine. Assumptions always lead to a dead end!

12-03-2013, 08:56 AM	#266
clemdaddy Senior Member Join Date: Oct 2009 Location: Fayetteville, Arkansas Posts: 1,923	Re: '66 Longbed 327 w/AC project that looks great... really smooth.



Register or Log In To remove these advertisements.

12-03-2013, 12:12 PM	#267
cortcomp Registered User Join Date: Oct 2012 Location: cortland, oh Posts: 792	Re: '66 Longbed 327 w/AC project Thanks guys! I will be taking the bottom masking off later hopefully, doing some quick touch ups if any overspray got through, and then the fun (for me anyways) part begins: i get to start putting the parking lights in, new rubber and clips, wiring harness, etc to make the hood complete. I LOVE assembling with new parts. __________________ Project "i'm just going to clean up the interior and the engine bay": http://67-72chevytrucks.com/vboard/s...d.php?t=550931

12-03-2013, 08:33 PM	#269
cortcomp Registered User Join Date: Oct 2012 Location: cortland, oh Posts: 792	Re: '66 Longbed 327 w/AC project I had filled the front panel seam with seam sealer and wiped it with a gloved finger. I wanted the crease to remain there so it looked normal, but not as deep as it is factory. I did the same on the fenders where the front black piece is spot welded to the white/green rest of the fender. I like the look and think it works well. Also, did inside the nose holes with black and masked it off, looks like it came out well. I'm not a fan when they're just overspray of body color. They look good body color, or black, but just kind of off color overspray looks bad, especially on the front of the vehicle, one of the most looked at areas. I have some hand touch up to do in there, but it looks like the tape kept 99.99% out. Attached Images __________________ Project "i'm just going to clean up the interior and the engine bay": http://67-72chevytrucks.com/vboard/s...d.php?t=550931

12-07-2013, 07:25 PM	#270
cortcomp Registered User Join Date: Oct 2012 Location: cortland, oh Posts: 792	Re: '66 Longbed 327 w/AC project Started some assembly on the hood today and ran into some questions: http://67-72chevytrucks.com/vboard/s...d.php?t=607123 Grinding off the pin allowed me to take the hing apart for paint. I made a new spring (2 actually) from a coat hanger, and found workable springs to replace the other ones in the latch setup. For the hinge pin in the latch, i found a simple locking pin that i took the wire off of, and i will drill a hole in the end once assembled and put a cotter pin through it. It won't be totally stock but clean, with clean lube, painted black and shiny springs should make it look new and work smoothly. Still confused on how/where some of the rubber pieces go. Attached Images __________________ Project "i'm just going to clean up the interior and the engine bay": http://67-72chevytrucks.com/vboard/s...d.php?t=550931

12-07-2013, 08:15 PM	#271
TJ's Chevy Registered User Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: '66 Longbed 327 w/AC project drool drool drool....that hood is a die for! lol! __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

12-08-2013, 12:00 PM	#272
cortcomp Registered User Join Date: Oct 2012 Location: cortland, oh Posts: 792	Re: '66 Longbed 327 w/AC project Hey thanks! It's not perfect, i have some touch up to do around the lower lip and some orange peel i have to sand on the nose section...and there are some dirt specs i'll be cleaning up, but i appreciate the compliments! The photos always miss the flaws and make every piece come out perfect, but i know where all the problems are even if you guys don't catch them __________________ Project "i'm just going to clean up the interior and the engine bay": http://67-72chevytrucks.com/vboard/s...d.php?t=550931

12-08-2013, 12:21 PM	#273
TJ's Chevy Registered User Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: '66 Longbed 327 w/AC project Well it came out a heck of alot better then my hood did!!! lol! I won't tell you about it! __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

12-08-2013, 02:46 PM	#274
cortcomp Registered User Join Date: Oct 2012 Location: cortland, oh Posts: 792	Re: '66 Longbed 327 w/AC project I finished doing the homemade latch today, i think one spring doesn't belong, think PO put it there because main spring broke. Coat hanger spring worked great! very firm! Here's more on that, i STILL don't know where all the rubber in the kit goes http://67-72chevytrucks.com/vboard/s....php?p=6407936 Attached Images __________________ Project "i'm just going to clean up the interior and the engine bay": http://67-72chevytrucks.com/vboard/s...d.php?t=550931

12-08-2013, 10:11 PM	#275
jayoldschool Moderator Join Date: Dec 2012 Location: ON, Canada Posts: 2,168	Re: '66 Longbed 327 w/AC project Looking great, my friend. Can't wait to see the new trim on it!

Register or Log In To remove these advertisements.