1973 Cheyenne Super 10 - Page 11 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jchav62 · 05-25-2010, 05:14 PM

Quote:

Originally Posted by JohnC

I guess I'm not seeing the problem. Drive fine til about 45mph, then gun it to 65mph. Problem solved.

That's definitely cross my mind!!

RIDDLA · 06-09-2010, 11:31 AM

Great lookin truck

joe231 · 08-08-2010, 08:13 PM

sucks about the wheel, can it be straightened?

BTW, what is that truck in your avatar?

jchav62 · 09-15-2010, 12:55 PM

Quote:

Originally Posted by joe231

sucks about the wheel, can it be straightened?

BTW, what is that truck in your avatar?

I decided to just run the Rockets. It's a little bumpy at some speeds, but it just looks too dam cool... I'll post some pics of it with all four some day...

That truck in my avatar is my '62, circa 1981, when my it belonged to my brother...

TheWhiteElephant · 10-04-2010, 01:13 AM

Any updates?

I just bought a '73 K20 that I was planning on building on a budget but you sure have me beat.

jchav62 · 10-06-2010, 12:51 PM

No updates. I've just been driving it. It's been my daily driver lately. I have to deal with a couple of issues that I've been putting off. It has a 2-piece driveshaft and the carrier bearing is going bad. I'll be switching to a one piece driveshaft soon. Also, my turn signal switch is turning into powder...only works left. That's also on the 'to-do' list.

jchav62 · 11-10-2010, 12:20 PM

I did a couple things to the 'daily driver'.

Using junkyard parts

I repaired the turn signal switch. I replaced the turn siganl cam with a nice one. The signals work like new again...

Since the truck was originally a 454 truck, the original p/s pump had been 'rigged up' to fit a small block. I ran it for a while, but lately the fabbed up brackets began to fatigue and break. I got a small block setup from the junkyard and put it in... It's proper now...

Other than that, she's treating me good and bringing me to work everyday...

joe231 · 11-10-2010, 01:44 PM

Right on man!!
Glad you are getting to enjoy the fruits of your labor

Posted via Mobile Device

jchav62 · 01-31-2011, 12:13 PM

Did a little something to the '73. Thanks Jonboy for the extra air cleaner. I actually located one at the shop right before yours arrived, but I like having extra parts on the shelf.

I got this idea from the show "Musclecar". They made a double snorkel air cleaner for one of their projects. I found a donor air cleaner... did some cutting and grinding a riveting and painting and this is what I came up with...

Jonboy · 01-31-2011, 12:54 PM

Very cool. Turned out very well.

Chevy350V8 · 01-31-2011, 10:39 PM

Your truck looks killer man!!!

joe231 · 01-31-2011, 10:45 PM

Posted via Mobile Device

jchav62 · 02-01-2011, 12:58 PM

Thanks guys!

JohnC · 02-04-2011, 09:24 AM

Looks good man!

jchav62 · 02-08-2011, 10:36 AM

Gracias!

Yesterday I received my new grille bowtie from top banana. As soon as it warms up a little that'll go on next.

jchav62 · 02-14-2011, 10:50 AM

Installed the new grille emblem on Friday. What a difference!! I love it...

jchav62 · 02-14-2011, 10:51 AM

Snapped a few pics...

JohnC · 02-17-2011, 12:56 PM

Looks good man!

Blanco_53 · 02-17-2011, 04:18 PM

Posted via Mobile Device

jchav62 · 03-10-2011, 04:33 PM

If you seen this whole thread, you'll know that about 90% of this truck is built with junkyard, swap meet, freebie, or homemade parts... a real budget builder.

Well, sticking with that plan, I asked a local gearhead in conversation if he had any Flowmasters or "Flowmaster" type mufflers. He said, "Let's walk back to my exhaust pile back here". Sure enough he had a complete exhaust setup, from the collector, 3" inch pipe, Flo-Pro mufflers with turn downs that will dump just before the axle.... $40.

That's the next thing going in...

GMC Guy · 03-10-2011, 05:09 PM

nice!

hopefully the bends in the pipe will fit your truck. i have a junkyard exhaust system very similar to yours, and it doesn't fit correctly. so now i have to pay a shop to run pipe from my junkyard headers to my junkyard 40 series flows haha

Dusty4x4 · 03-10-2011, 05:26 PM

Good looking build, what size tires and wheels you running?

jchav62 · 03-10-2011, 05:28 PM

Quote:

Originally Posted by GMC Guy

nice!

hopefully the bends in the pipe will fit your truck. i have a junkyard exhaust system very similar to yours, and it doesn't fit correctly. so now i have to pay a shop to run pipe from my junkyard headers to my junkyard 40 series flows haha

Then bends are a little off, but I have a plan to adjust them to fit...

jchav62 · 03-10-2011, 05:28 PM

Quote:

Originally Posted by Dusty4x4

Good looking build, what size tires and wheels you running?

Thanks... I'm running 15x8's all the way around... 235/60's up front, 295/50's in the rear.

GMC Guy · 03-10-2011, 07:26 PM

Quote:

Originally Posted by jchav62

Then bends are a little off, but I have a plan to adjust them to fit...

ya the trans crossmember can be tricky lol

06-09-2010, 11:31 AM	#252
RIDDLA Registered User Join Date: Aug 2002 Location: Santa Fe NM Posts: 393	Re: 1973 Cheyenne Super 10 Great lookin truck __________________ 68 GMC-Stripshow 70 Chevy Monte Carlo 72 Chevy Monte Carlo LOLO 72 Chevy Suburban Blurban 74 Vw Bug 78 Chevy k10 lwb 78 Chevy k10 swb 03 Cadillac Escalade-Duecesix 84 Cadillac Coupe Deville DeElegance B.O. A Lifestyle Money Cant Buy! Win,Lose, or Tie I'm a Raider till i die

08-08-2010, 08:13 PM	#253
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: 1973 Cheyenne Super 10 sucks about the wheel, can it be straightened? BTW, what is that truck in your avatar? __________________ *CHEVY ONLY*

10-04-2010, 01:13 AM	#255
TheWhiteElephant God is good! Join Date: Sep 2010 Location: Texas Posts: 689	Re: 1973 Cheyenne Super 10 Any updates? I just bought a '73 K20 that I was planning on building on a budget but you sure have me beat.

10-06-2010, 12:51 PM	#256
jchav62 1962 C-10 Join Date: Apr 2005 Location: Las Vegas, New Mexico Posts: 4,978	Re: 1973 Cheyenne Super 10 No updates. I've just been driving it. It's been my daily driver lately. I have to deal with a couple of issues that I've been putting off. It has a 2-piece driveshaft and the carrier bearing is going bad. I'll be switching to a one piece driveshaft soon. Also, my turn signal switch is turning into powder...only works left. That's also on the 'to-do' list. __________________ Joseph Chavez "See the USA in a Chevrolet!!" ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1962 C10 Shortbed Fleetside 327/th350 GV overdrive 1974 C10 Longbed Fleetside 350/th350 "The Trash Truck" 1999 Chevy 2500 OBS, Longbed 5.7/4L80E 4x4 2015 GMC Sierra SLE 1500 4x4

11-10-2010, 12:20 PM	#257
jchav62 1962 C-10 Join Date: Apr 2005 Location: Las Vegas, New Mexico Posts: 4,978	Re: 1973 Cheyenne Super 10 I did a couple things to the 'daily driver'. Using junkyard parts I repaired the turn signal switch. I replaced the turn siganl cam with a nice one. The signals work like new again... Since the truck was originally a 454 truck, the original p/s pump had been 'rigged up' to fit a small block. I ran it for a while, but lately the fabbed up brackets began to fatigue and break. I got a small block setup from the junkyard and put it in... It's proper now... Other than that, she's treating me good and bringing me to work everyday... __________________ Joseph Chavez "See the USA in a Chevrolet!!" ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1962 C10 Shortbed Fleetside 327/th350 GV overdrive 1974 C10 Longbed Fleetside 350/th350 "The Trash Truck" 1999 Chevy 2500 OBS, Longbed 5.7/4L80E 4x4 2015 GMC Sierra SLE 1500 4x4

11-10-2010, 01:44 PM	#258
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: 1973 Cheyenne Super 10 Right on man!! Glad you are getting to enjoy the fruits of your labor Posted via Mobile Device __________________ *CHEVY ONLY*

01-31-2011, 12:13 PM	#259
jchav62 1962 C-10 Join Date: Apr 2005 Location: Las Vegas, New Mexico Posts: 4,978	Re: 1973 Cheyenne Super 10 Did a little something to the '73. Thanks Jonboy for the extra air cleaner. I actually located one at the shop right before yours arrived, but I like having extra parts on the shelf. I got this idea from the show "Musclecar". They made a double snorkel air cleaner for one of their projects. I found a donor air cleaner... did some cutting and grinding a riveting and painting and this is what I came up with... Attached Images __________________ Joseph Chavez "See the USA in a Chevrolet!!" ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1962 C10 Shortbed Fleetside 327/th350 GV overdrive 1974 C10 Longbed Fleetside 350/th350 "The Trash Truck" 1999 Chevy 2500 OBS, Longbed 5.7/4L80E 4x4 2015 GMC Sierra SLE 1500 4x4

01-31-2011, 12:54 PM	#260
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: 1973 Cheyenne Super 10 Very cool. Turned out very well. __________________ 1974 Jimmy- 5.3/4L80e/NP241 Last edited by Jonboy; 01-31-2011 at 01:12 PM.

01-31-2011, 10:39 PM	#261
Chevy350V8 Semper Fi!!! Join Date: Aug 2010 Location: Sherrills Ford, North Carolina Posts: 971	Re: 1973 Cheyenne Super 10 Your truck looks killer man!!! __________________ Brandon... "IT ONLY TAKES EVERYTHING YOU GOT!!" Semper Fi

01-31-2011, 10:45 PM	#262
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: 1973 Cheyenne Super 10 Posted via Mobile Device __________________ *CHEVY ONLY*

02-01-2011, 12:58 PM	#263
jchav62 1962 C-10 Join Date: Apr 2005 Location: Las Vegas, New Mexico Posts: 4,978	Re: 1973 Cheyenne Super 10 Thanks guys! __________________ Joseph Chavez "See the USA in a Chevrolet!!" ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1962 C10 Shortbed Fleetside 327/th350 GV overdrive 1974 C10 Longbed Fleetside 350/th350 "The Trash Truck" 1999 Chevy 2500 OBS, Longbed 5.7/4L80E 4x4 2015 GMC Sierra SLE 1500 4x4

02-04-2011, 09:24 AM	#264
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: 1973 Cheyenne Super 10 Looks good man!

02-08-2011, 10:36 AM	#265
jchav62 1962 C-10 Join Date: Apr 2005 Location: Las Vegas, New Mexico Posts: 4,978	Re: 1973 Cheyenne Super 10 Gracias! Yesterday I received my new grille bowtie from top banana. As soon as it warms up a little that'll go on next. __________________ Joseph Chavez "See the USA in a Chevrolet!!" ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1962 C10 Shortbed Fleetside 327/th350 GV overdrive 1974 C10 Longbed Fleetside 350/th350 "The Trash Truck" 1999 Chevy 2500 OBS, Longbed 5.7/4L80E 4x4 2015 GMC Sierra SLE 1500 4x4

02-14-2011, 10:50 AM	#266
jchav62 1962 C-10 Join Date: Apr 2005 Location: Las Vegas, New Mexico Posts: 4,978	Re: 1973 Cheyenne Super 10 Installed the new grille emblem on Friday. What a difference!! I love it... Attached Images __________________ Joseph Chavez "See the USA in a Chevrolet!!" ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1962 C10 Shortbed Fleetside 327/th350 GV overdrive 1974 C10 Longbed Fleetside 350/th350 "The Trash Truck" 1999 Chevy 2500 OBS, Longbed 5.7/4L80E 4x4 2015 GMC Sierra SLE 1500 4x4

02-14-2011, 10:51 AM	#267
jchav62 1962 C-10 Join Date: Apr 2005 Location: Las Vegas, New Mexico Posts: 4,978	Re: 1973 Cheyenne Super 10 Snapped a few pics... Attached Images __________________ Joseph Chavez "See the USA in a Chevrolet!!" ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1962 C10 Shortbed Fleetside 327/th350 GV overdrive 1974 C10 Longbed Fleetside 350/th350 "The Trash Truck" 1999 Chevy 2500 OBS, Longbed 5.7/4L80E 4x4 2015 GMC Sierra SLE 1500 4x4



Register or Log In To remove these advertisements.

02-17-2011, 12:56 PM	#268
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: 1973 Cheyenne Super 10 Looks good man!

02-17-2011, 04:18 PM	#269
Blanco_53 Registered User Join Date: Nov 2008 Location: midland,tx Posts: 90	Re: 1973 Cheyenne Super 10 Posted via Mobile Device

03-10-2011, 04:33 PM	#270
jchav62 1962 C-10 Join Date: Apr 2005 Location: Las Vegas, New Mexico Posts: 4,978	Re: 1973 Cheyenne Super 10 If you seen this whole thread, you'll know that about 90% of this truck is built with junkyard, swap meet, freebie, or homemade parts... a real budget builder. Well, sticking with that plan, I asked a local gearhead in conversation if he had any Flowmasters or "Flowmaster" type mufflers. He said, "Let's walk back to my exhaust pile back here". Sure enough he had a complete exhaust setup, from the collector, 3" inch pipe, Flo-Pro mufflers with turn downs that will dump just before the axle.... $40. That's the next thing going in... Attached Images __________________ Joseph Chavez "See the USA in a Chevrolet!!" ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1962 C10 Shortbed Fleetside 327/th350 GV overdrive 1974 C10 Longbed Fleetside 350/th350 "The Trash Truck" 1999 Chevy 2500 OBS, Longbed 5.7/4L80E 4x4 2015 GMC Sierra SLE 1500 4x4 Last edited by jchav62; 03-10-2011 at 04:44 PM.

03-10-2011, 05:09 PM	#271
GMC Guy Registered User Join Date: May 2009 Location: Sparks, NV Posts: 913	Re: 1973 Cheyenne Super 10 nice! hopefully the bends in the pipe will fit your truck. i have a junkyard exhaust system very similar to yours, and it doesn't fit correctly. so now i have to pay a shop to run pipe from my junkyard headers to my junkyard 40 series flows haha __________________ Greg 1974 GMC 1/2 Ton SWB Fleetside L33 5.3/4l65e .................__ ............._____l __\__ ..............l_(O)_ l___(O)]

03-10-2011, 05:26 PM	#272
Dusty4x4 Registered User Join Date: Mar 2009 Location: Brevard,N.C Posts: 173	Re: 1973 Cheyenne Super 10 Good looking build, what size tires and wheels you running? __________________ 1980 1/2 ton shortbed project 1978 grand prix project Never stop trying...

Register or Log In To remove these advertisements.