![]() |
|
![]() |
#1 | |
Registered User
Join Date: Mar 2015
Location: Washington State
Posts: 1,644
|
Re: The English are coming! Or..another C10 in the Motherland.
Quote:
You are coming along good, just keep moving forward and in short enough time you will be so happy you did.
__________________
John 3:16 - Saved me... God Bless |
|
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Jul 2013
Location: Essex
Posts: 936
|
Re: The English are coming! Or..another C10 in the Motherland.
Thanks Jeff,
Must admit that I had a total MOJO failure this past weekend after struggling for 3 hours with my pot blaster, got frustrated, and then ended up trying to push the rear control arm bushes out with my press. That ended up badly as I bent the arm - nothing that cant be re bent - so shut the garage door and retired to the sanctity of beer and the F1. Goodish news is that all of the parts I have been waiting for should be here on Friday and Lady P has informed me that she is working on Saturday so I can have a guilt free day in the garage. I 'think' I should still be able to get Woody back on four wheels by the end of the month, probably without the engine in and fired up, but that is more progress than I have made in the past few years! Could have just thrown it all back together but, as you say, knowing that I have a solid base is what is motivating me to keep going. That and my daughter asking if we can get the Christmas tree in Woody this year... No pressure then.... Looking forward to seeing your cab in paint. P. ![]()
__________________
Woody's Build - http://67-72chevytrucks.com/vboard/s...d.php?t=658621 If it goes wrong, I blame the Internet... |
![]() |
![]() |
![]() |
#3 | |
Registered User
Join Date: Mar 2015
Location: Washington State
Posts: 1,644
|
Re: The English are coming! Or..another C10 in the Motherland.
Quote:
So today i am going for a early morning hike then out to shop to get the damn bottom door area of cab cut and pulled out to match the door and then rewelded up. After that... it is ready to be sprayed with grease and wax remover, and the epoxy sealer spayed on!! I say that but watch i will be inspecting everything and find something that will hold be back to spray until next weekend. LOL
__________________
John 3:16 - Saved me... God Bless |
|
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Jul 2013
Location: Essex
Posts: 936
|
Re: The English are coming! Or..another C10 in the Motherland.
The observant amongst you will notice that there was no update last week, for others probably a blessed releif from more picture of nothing but partially blasted suspension pieces.
Now dear viewer let me tell you why I missed last week off.Simply put even I had had enough of the continual cleaning blasting unclogging sifting and general monotonous receptiveness that my 'hobby' had become. So I took a week off - well after spending a few hours fighting my blaster and then bending a control arm in frustration from my missing' weekend - and went and spent some more money. First purchase was a fresh batch of blasting media. At £7ish per 25kg I just couldn't face sifting and cleaning the stuff I already had. ![]() Next was something I wish I had purchased a year ago - a 5mm nozzle. What an absolute revelation this bad boy is. No more clogging and when I did reuse some media I just chucked it in and away we went. Wonderful.... ![]() Now before I get too carried away I did make a school boy error when ordering the rear control arm bushes. I mistakenly thought they came as singles so ordered 2 boxes... On a positive I now have a spare set and Rock Auto managed to get them here in 3 days which must be some sort of record. ![]() Ah Yes. In other news the box containing my Steel-It paint finally arrived so this weekend I should be able to get loads done especially as Lady P had informed me that she was going out for the day on Saturday. Perfect... Well.. nearly. Now for those paying attention I might have made mention that I am Charlie Big Potatoes at a Logistics Software start up which is, to be perfectly honest, rather tiring. Well absolutely knackering is closer to the truth. Why is this relevant I hear you ask? Well after Lady P had left for the day and I had returned from taking the Mutts for a walk, I decided to have a 30 minute lie down before heading outside. I mean, it was only 9.30 so half an hour is not going to hurt is it... Next thing I know the dogs are shouting at me and it is 6pm... Ho hum. Must have needed the rest. So here I am a week behind schedule, best set the alarm for Zero dark 30 then and just get on with it... First things first, Blasting 'tent' constructed. ![]() Lower suspension arm half way through the process. Did I say I love new media and a 5mm nozzle? ![]() Rear control arms. Done! ![]() Upper suspension arms.. Done along with the pivots. ![]() Still a bit cold so broke out the space heater to warm up the paint and... ![]() Taa Daa! Painted stuff ![]() Whilst that was going off time to get the control arm bushes out with my favourite tool... ![]() FIRE!!! ![]() And finally... ![]() So. Nowhere near as much as I wanted to get done but, progress is progress. Promise that next weeks update will be a bit more boltie boltie rather than cleanie cleanie.... And as you have made it this far a little something Lady P saw in the car park, apparently it goes up and down.... ![]() Until the next time dear viewers.... ONWARDS!! P. ![]()
__________________
Woody's Build - http://67-72chevytrucks.com/vboard/s...d.php?t=658621 If it goes wrong, I blame the Internet... |
![]() |
![]() |
![]() |
#5 |
Senior Member
![]() Join Date: Mar 2011
Location: Tucson, Arizona
Posts: 2,070
|
Re: The English are coming! Or..another C10 in the Motherland.
Great job. the frame and parts are look awesome
__________________
Sanity'66 http://67-72chevytrucks.com/vboard/s...d.php?t=515110 Long bed, Fleetside, Small back window I've Done So Much, With So Little, For So Long, That Now I Can Do Anything With Nothing. ![]() |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Jul 2013
Location: Essex
Posts: 936
|
Re: The English are coming! Or..another C10 in the Motherland.
![]() The automotive circle of life was in full effect this weekend as I have finally moved from this.... ![]() To this.... ![]() So what is the automotive circle of life? It is when you do a Google search for a picture for the correct orientation of an assembly and end up being presented with a picture of the very same assembly, you took, before disassembling of said assembly.... So, let's rewind shall we. My Saturday saw our very own Santa Claus, Glen Anderson, arriving at PY Towers laden down with gifts that had been accumulating at Grizz place over the course of the Pandemic, amongst which was the loan of a torque wrench to assist in putting Woody back open his wheels. I would like to say that I cracked straight on with assembly but the foot tall grass - the unwelcome result of the past 2 weeks rain and sun - meant that I had an appointment with my mower...Which lasted all of 10 minutes before the grass collector decided to break and then the battery went flat (probably because dumbo here left the ignition on whilst fixing the collector) Thankfully it started raining again so called it a day and retired to the comfort of my chair and a beer. Sunday started at the crack of Noon due to family commitments, first things first... How many of us have thrown bolts in a box during disassembly because "I will be putting it back together next week so will remember where everything goes..." 4 years later I am greeted with this. ![]() There are another 3 boxes of these so first job was to sort out the various fasteners before the 'fun' can start. First job was to put the bushes into the trailing arms. Pretty simple Lube, Lube ![]() Press, Press. ![]() Mmm... now how to get the rather snug bushes into the mount? ![]() Well this involved two bits of an old oil drum, a bit of wood and a jack. ![]() Taa Daa! ![]() The assorted screwdriver, mallet and grips where required to remove the bits of tin that took longer than actually getting the arms into the mounting. Next job was to unearth the axle from the very back of the garage, realise that is was round the wrong way and then pull, push and swear at it until it was safely tucked under the chassis. ![]() No. I am not going to show the Eiffel Tower of wood required to get the chassis high enough to make the above happen but needless to say, not my proudest moment... With the axle roughly in place time to dig out the lowering blocks and newly painted U Bolts, ![]() Push, push. Lift Lift. Swear, Swear. ![]() All in place...oh...hold on... ![]() Forgot to put the mount on for the panhard and anti roll bar so a bit more pushing and we now have the things looking a little closer to being loosely assembled. Doing this for the second time made me realise that I had not done a particularly good job first time round, witness the gap between the panhard rod mount and the chassis... ![]() Previously I had just left it but this time made a quick spacer and we are good to go! ![]() Oh Look! Its nearly level at ride heigh ( or will be with a bit more weight on the back) ![]() A quick bit of twiddling with the bar and we are within a 1/16th side to side. ![]() ![]() Nice.... Quick break for these and then back out. ![]() Spent about an hour trying to work out why the antiroll bar drop links was outside the bar on one side and inside on the other even though all the measurements seemed to indicate that everything was square and true. Eventually just accepted that "it is what it is' and moved onto the shock absorbers. ![]() Which is where I called it a night... The shocks don't quite fit properly and the more I looked at it the more I realised that I was going to have to do a little 're engineering' to get everything to work as it should. So.... I 'think' I will meet my objective of getting Woody back on his wheels by the end of the month but you will have to stay tuned for the next thrilling instalment! ONWARDS!!!! P. ![]()
__________________
Woody's Build - http://67-72chevytrucks.com/vboard/s...d.php?t=658621 If it goes wrong, I blame the Internet... |
![]() |
![]() |
![]() |
#7 | |
Registered User
Join Date: Mar 2015
Location: Washington State
Posts: 1,644
|
Re: The English are coming! Or..another C10 in the Motherland.
Quote:
Awesome work sir!! It seems anytime you install non-stock items on they can sometimes impact other stock items. I had the worst time getting the panhard bar in and clearing my rearend until I learned i needed a non-stock bent style one and tada, it fits now, of course i have a stock style adjustable straight one now sitting on the shelf. Looks good though, that brace looks great.
__________________
John 3:16 - Saved me... God Bless |
|
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Jul 2013
Location: Essex
Posts: 936
|
Re: The English are coming! Or..another C10 in the Motherland.
It was our conversation that made me commit to the brace, so far not regretting that decision!
P. ![]()
__________________
Woody's Build - http://67-72chevytrucks.com/vboard/s...d.php?t=658621 If it goes wrong, I blame the Internet... |
![]() |
![]() |
![]() |
#9 |
Senior Member
![]() Join Date: Mar 2011
Location: Tucson, Arizona
Posts: 2,070
|
Re: The English are coming! Or..another C10 in the Motherland.
Nice work. You're making great progress and I like your setup on the rear.
__________________
Sanity'66 http://67-72chevytrucks.com/vboard/s...d.php?t=515110 Long bed, Fleetside, Small back window I've Done So Much, With So Little, For So Long, That Now I Can Do Anything With Nothing. ![]() |
![]() |
![]() |
![]() |
#10 | |
Registered User
Join Date: Jul 2013
Location: Essex
Posts: 936
|
Re: The English are coming! Or..another C10 in the Motherland.
Quote:
Just working out what the next 6 week 'sprint' is going to consist of! P. ![]()
__________________
Woody's Build - http://67-72chevytrucks.com/vboard/s...d.php?t=658621 If it goes wrong, I blame the Internet... |
|
![]() |
![]() |
![]() |
#11 |
Registered User
Join Date: Jul 2013
Location: Essex
Posts: 936
|
Re: The English are coming! Or..another C10 in the Motherland.
Well that was a surprise... Another deadline well and truly missed.
BUT! Its not my fault honest Guv.... I had actually got all of the front suspension, cleaned painted greased and ready for final assembly when I decided to give the dust seals (they are actually more like grease seals) another little clean up resulting in 3 of the 4 splitting. No pictures as my phone decided it didn't like being covered in paint and grinding dust but imagine a round black rubber thing with a hole in the middle and you will not be a million miles away... Oh....Bumhats.... Now, I could have thrown them together with the split dust shields - they go on the lower A arm and keep grease in the bearing caps- but that would have continually nagged at me until I stripped the suspension to redo them at a later date. AND!! As the time scale is self imposed to ensure that I keep momentum, and a record of what I am doing, decided to order up a new set from the States. However.... ![]() The damn things have still not left the warehouse... Grrrr.... So I returned to the rear and got everything ship shape and Bristol fashion.... ![]() Cant find the gasket for the diff cover so something else that will have to be ordered up. Doesn't look it but a lot of time and effort have gone into making all of the fit, line up, look good and most importantly work together. ![]() ![]() Once I get the front suspension on will pull Woody's chassis outside for a bath, the old boy is looking a bit grubby. So, in closing, still stuff to do - hopefully the olives will turn up so I can fit the fuel return line - including running the brake lines, re fitting the fuel tank, fitting the engine in the chassis so I can test fire it and erm well a huge amount more. Good news, compared to when I started I now appear to have a chassis whereas before I had a Mecanno kit... Progress will slow down for a few weeks whilst I wait for the final parts to fit the from suspension and then I have to start on the cab.... Oh dear.... Until the next time... ONWARDS! P. ![]()
__________________
Woody's Build - http://67-72chevytrucks.com/vboard/s...d.php?t=658621 If it goes wrong, I blame the Internet... |
![]() |
![]() |
![]() |
#12 |
Registered User
Join Date: Feb 2012
Location: Beautiful BC, Canada, eh?!
Posts: 2,227
|
Re: The English are coming! Or..another C10 in the Motherland.
Most people just use a fat bead of silicone. Like Permatex Ultra Black.
__________________
1961 Apache: "Grabber Orange" Shortboxed, pancake, step-notch, air-ride, boosted-LS 1977 Silverado: Shortboxed & dropped, potato-potato V8 Pontiac Firefly (Chevy Sprint): The ultimate engine swap: 5.7L in a 1.0L bag Lotus Super 7 Replica: Scratch-built street-legal rollerskate |
![]() |
![]() |
![]() |
#13 | |
Registered User
Join Date: Jul 2013
Location: Essex
Posts: 936
|
Re: The English are coming! Or..another C10 in the Motherland.
Quote:
Thanks Skinny. P. ![]()
__________________
Woody's Build - http://67-72chevytrucks.com/vboard/s...d.php?t=658621 If it goes wrong, I blame the Internet... |
|
![]() |
![]() |
![]() |
#14 |
Moderator
![]() ![]() Join Date: Aug 2011
Location: China Spring, TX
Posts: 7,280
|
Re: The English are coming! Or..another C10 in the Motherland.
Great work on your chassis. Thanks for the updates.
__________________
Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats? |
![]() |
![]() |
![]() |
#15 |
Registered User
Join Date: Jul 2013
Location: Essex
Posts: 936
|
Re: The English are coming! Or..another C10 in the Motherland.
Doesn't time fly when your having fun...
A month since my last missive might lead you to the conclusion that progress should have been made... ![]() And you would be right but lets not get ahead of ourselves shall we... So, for those of you keeping up, the last time we were waiting for parts. Stupid little bits and pieces that meant that progress had come to a halt. To be precise, these stupid little bits and pieces. ![]() Ball joint boots that precluded me from attaching the front suspension. Grrr. However, after exchanging 4 English pounds, I was at the point were progress could be made once again. So, with the able assistance of ![]() the offending articles were attached to the cleaned and freshly greased ball joints. ![]() Nice. And a lot easier than trying to replicate the copper collar that affixed the originals. Plus. Race Car. With the final piece fo the assembly jigsaw done it was then a simple task of putting Tab A in Slot B. Well actually no. Obviously. When Woody originally came into my possession he was on a pair of very short front springs which had been further enhanced by having an extra coil or two cut from them. Great for the Looooowwwwsss but with the addition of 2.5" dropped spindles the crossmember, even with no engine, was so close to the floor that I couldn't get my super low floor jack under it. PLUS! every time I jacked poor old Woody up they fell out of the spring pockets. Not ideal. Looked cool though.. A quick post on the 67-72 truck forum asking for advice was answered by Skinny G who suggested a pair of 1 ton coils which could be trimmed to fit. £58 later, and 3 days, these arrived at PY Towers. ![]() (next to the 'original' springs and Mrs. Grinder) For those of you that don't see the problem with that picture I can assure you we can no longer be friends... ![]() Better... ![]() Better still! And for comparison...Which will become important..later. ![]() This also had the additional benefit of making it easier to get the front suspension back together, so a win/win. ![]() ![]() The advantage of the 2.5" dropped spindle over the 3" is that you can use 15" wheels, just, without the suspension hanging below the wheel. Picture is a bit misleading bit there is about 1/4 between the lip of the wheel and the control arm. ![]() Whilst this was going on other things appeared on my door step. ![]() ![]() ![]() I have no idea at all how they got there.... Which lead me to the next pause as I now needed to wait for tools. P. ![]()
__________________
Woody's Build - http://67-72chevytrucks.com/vboard/s...d.php?t=658621 If it goes wrong, I blame the Internet... |
![]() |
![]() |
![]() |
#16 |
Registered User
Join Date: Jul 2013
Location: Essex
Posts: 936
|
Re: The English are coming! Or..another C10 in the Motherland.
Whilst waiting for said tools to turn up I did a little living.
Went to visit my very good friend Jay who now spends his day putting these sort of things together. ![]() ![]() ![]() Nice. Plus in the unit next to him one of the Nova's from Death Proof. ![]() ![]() Also spent some time here with Lady P and Dog. ![]() And because life is slowly getting back to normal enjoyed a rather drunken day with my oldest friend at Goodwood Festival of Speed where I spent far too much time lusting after this. ![]() By which time other things, tools things had arrived. ![]() ![]() ![]() Big thanks to @winchman who pointed me towards this rather fine piece of equipment when I realised that my puller had been taken in the last break in 5 years ago. That meant that the pitman arm could be taken off my old steering box and secured the wrong way round on my new one.... ![]() Next was instal my NoLimits from Anti Roll bar which, I realised half way through installing it that I had made a complete pigs ear of, the first time round. This was quickly brought to light and corrected by reading the instructions...ridiculous behaviour... It did highlight the problem that the crossmember, that had been bent and split during Woody's awakening from the container on his trip to the Motherland, would require some remedial attention with a large hammer. ![]() Whats next on the list then? Plumbing in the brakes. For some reason I was really not looking forward to this but, Hey Ho. Lets go! First things first, lets install the flexible hoses to the callipers...oh hold on... Captains side, not a problem. The drinkers side however... Grrrrr... The thread in the calliper to take the bolt holding the flexie line in had been damaged, which really made me rather annoyed as I had visions of having to buy another one, an expense I really didn't fancy. However, after regaining my coooool ran a tap through the thread and, after a lot of swearing, pleased to say that it cleaned up very well. Gave it a good clean out and we are good to go. if it turns out to be a dud in the future I will probably upgrade to a set of dual piston Wilwoods but, for the moment all good. With the 'simple' job of getting the flexie pipes in time to break out my faithful brake tool... ![]() ... and remake the pipes I made 4 years ago. ![]() quite pleased with the way they came out. ![]() Dog approved. Now on to the backs. Quick bracket made up ![]() Painted and installed along with the flexie for the rears ![]() Which highlighted a potential problem for 'Next Year Paul' that of if I DO decide to do a C notch I will have to redo the brake line routing as well as the fuel lines. Bit annoyed at myself that I didn't think of it before hand but a quick look at the fuel lines shows that an additional bit of braided line will solve the fuel issue and the brake line problem I will worry about...later. Thinking ahead I was looking for fuel filler lines for my rear mounted tank when I came across this for the princely sum of £10 on eBay ![]() More will become clear in the fulness of time. Which leads me onto my final picture for the evening and a reference back to the springs and Mrs. Grinder. ![]() Will save the final cutting until I have Woody back in one piece and he has had some time to settle, plus I have got the right size front tyres, but can already see another half coil joining my trophy cabinet. Hope to drag Woody outside over the coming week to give him a bit of a wash off plus tidy up the disaster that is my garage. With that I will leave you to enjoy the rest of your evening. Until the next time. ONWARDS!!! P. ![]()
__________________
Woody's Build - http://67-72chevytrucks.com/vboard/s...d.php?t=658621 If it goes wrong, I blame the Internet... |
![]() |
![]() |
![]() |
#17 |
Registered User
Join Date: Mar 2015
Location: Washington State
Posts: 1,644
|
Re: The English are coming! Or..another C10 in the Motherland.
I am liking this.....
__________________
John 3:16 - Saved me... God Bless |
![]() |
![]() |
![]() |
#18 |
Registered User
Join Date: Jul 2013
Location: Essex
Posts: 936
|
Re: The English are coming! Or..another C10 in the Motherland.
Thanks Jeff!
It’s not perfect but it is better than my last build so I will count that as progress. Yours is coming along well, shame we are so far apart as we could have done a comparison on the cross brace. Onwards! P. ![]()
__________________
Woody's Build - http://67-72chevytrucks.com/vboard/s...d.php?t=658621 If it goes wrong, I blame the Internet... |
![]() |
![]() |
![]() |
#19 |
Registered User
Join Date: Jul 2013
Location: Essex
Posts: 936
|
Re: The English are coming! Or..another C10 in the Motherland.
This.
![]() Is what 18 months of work look's like. Now I don't expect you to be overwhelmed but to me this was a huge milestone. How do I know you will not be overwhelmed? Quite simply I called Lady P to come and look at what I had achieved as Woody emerged from the garage like a rather large (and Ugly) Moth from a chrysalis. Her comment... What have you done... Good job she is a bit of a Hottie or she would have been kicked to the curb years ago. Anyway... All of the plumbing is now in place, brakes and fuel, tight and just awaiting testing - only thing left to do on the tank is to trim off the ends of the inlet and return to fit the compression fittings and put the Walbro 450 in the tank ![]() Tank is fitted but still a little loose as I start putting together the rats nest that is going to be the fill and vents etc. I have a cunning plan to conceal the filler but you will have to wait a while until I get to that stage. ![]() As Woody was outside the garage I took the opportunity to have a tidy up, sweep the floors and move the cab liberating some much needed space. ![]() Why do I need the space? Next stage of the build is to plonk this between the rails and attempt to get it started. ![]() I have been doing a lot of thinking lately about what I am looking too have at the end of the build process. The plan has not changed, just the timings. So...... I am going to put the LS in 'as is' I have a Sloppy Stage 2 cam and a set of 80lb SnakeEater injectors already but if I put these in I will need to buy tuning software at a cost of $500Ish. Now that $500 I can use on a wiring loom that is desperately needed - seems like a sensible choice to me - and I would still need to buy the loom even if I get the HP Tuners software which means I could add another 3 months to the build process... I am going to paint the firewall, my pal Jay has offered to be my Yoda so feel slightly more confident about it, and Raptor the floor. I 'Might" strip the interior completely and repaint it - I will see how the firewall turns out. Still need a T56 - if anybody want to donate one to the cause!- I really want to get my tree this year in Woody, lets see how close I get. Longer term I will take the engine out to fit the cam, injectors etc and fit the turbo, at that point I might go with the Holley Terminator or stump up for the HP Tuners. That part of the plan has not changed. Tuuuurrrrrrbbbbbooooooo. Strictly for burnouts and ice cream you understand. ![]() And with that I will bid you a good day! Onwards! P. ![]()
__________________
Woody's Build - http://67-72chevytrucks.com/vboard/s...d.php?t=658621 If it goes wrong, I blame the Internet... |
![]() |
![]() |
![]() |
#20 |
Senior Member
![]() Join Date: Oct 2009
Location: Fayetteville, Arkansas
Posts: 1,923
|
Re: The English are coming! Or..another C10 in the Motherland.
Really great work there... doing it right.
Though I got a little queasy seeing you warm up rattle can with a jet engine. ha |
![]() |
![]() |
![]() |
#21 |
Registered User
Join Date: Dec 2012
Location: Rochester, KENT
Posts: 10,528
|
Re: The English are coming! Or..another C10 in the Motherland.
Thanks for the delivery yesterday in spite of the risk you ran of getting stuck on the Dartford crossing Paul.
Looking forward to the next part in Rezin Rockit chassis works Your rolling chassis progress looks great. Well done !.
__________________
MY BUILD LINK: http://67-72chevytrucks.com/vboard/s...585901]Redneck Express - 1966 C10 Short Fleetside MY USA ROADTRIPS http://forum.retro-rides.org/thread/...2018-humdinger IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM MATE. |
![]() |
![]() |
![]() |
#22 |
Registered User
Join Date: Jul 2013
Location: Essex
Posts: 936
|
Re: The English are coming! Or..another C10 in the Motherland.
Had an hour today whilst I dodged the rain and endeavoured to cut the grass. So, whilst sheltering from the downpours I took this...
![]() Added the compression fittings and ended up here... ![]() where it has become apparent that the braided hoses are slightly too long. Oh sausages... might be able to reroute them and take a little of the tension out but will revise that once I have the final position for the tank locked in. Time to turn my attention to this. ![]() For those not in the know this is a 2005 LM7 out of a 2005 Silverado, purchased with a reported 89K under its belt, a factory race engine prime for a little forced induction... I had previously 'thrown' the sump, pick up and windage tray from a CTS-V on there as the truck sump hangs down below the crossmember on a C10. PLUS this sump set up has better oil control as I do intend to hoon Woody around once he is back up and running. ![]() ![]() Why take the sump back off then? Two reasons. 1. I wanted to fit this little doo hicky - a brace for the pick up tube as standard the oil pump is drilled for two but only gets one. Might be nothing, might be something but it is cheap insurance ![]() Sorry, no picture of it fitted, I forgot. 2. A friend has offered to weld in the turbo return oil bung if I get the sump over to him tomorrow and, as it is not contaminated with oil as yet, seemed like an offer I couldn't turn down. Whilst there I thought Would remind myself on the condition of the engine which is remarkably good and hold up to the theory that it is a 89K engine with regular oil changes. ![]() The cross hatching is still evident on the cylinder walls as well. ![]() PLUS! this looks as if it is a Gen3/4 crossover engine with the better rods so even more reason to intro the Whirly Boi. And finally... ![]() Finally took what is probably the must useless tool in my box out of its wrapper for the very first time. I have no idea why I am in possession of a lb-in torque wrench but today I used it to correctly tighten the pick up tube bolts to 8.8lbft or 106 lb-in. And that brings you up to date. Going to set another 6 week target for myself starting over the bank holiday weekend so that when my mysterious benefactor sends me a T56 I am ready to go... Yea Right.... Anyway, until the next time... Onwards! P. ![]()
__________________
Woody's Build - http://67-72chevytrucks.com/vboard/s...d.php?t=658621 If it goes wrong, I blame the Internet... |
![]() |
![]() |
![]() |
#23 |
Registered User
Join Date: Jul 2013
Location: Essex
Posts: 936
|
Re: The English are coming! Or..another C10 in the Motherland.
Have next week off so have agreed with Lady P that I can have 2 days ‘Woody Time’ Narf, Narf….
Short term plan is to get the engine in and running, fingers crossed that all the lines hold fuel without leaking, plus it will be another thing ticked off the list. Will definitely be out again for a tidy up but, for motivation, a good plan. Also want to get the cab floor stripped, fire wall bare metalled and any seam sealing done so that I can get it in paint by the end of September, early October. Still undecided as to if I will strip and paint the interior as yet - sort of swaying between a yes and a no. Only major things left to buy is a wiring loom, gearbox and prop shaft, set of front tyres and the paint and materials to complete the above. Better start doing the lottery! P. ![]()
__________________
Woody's Build - http://67-72chevytrucks.com/vboard/s...d.php?t=658621 If it goes wrong, I blame the Internet... |
![]() |
![]() |
![]() |
#24 | |
Registered User
Join Date: Jun 2016
Location: Wiltshire / UK
Posts: 110
|
Re: The English are coming! Or..another C10 in the Motherland.
Great progress on the rolling chassis.
I was in the same boat re. how far to go with the cab paint but decided to blast the shell and epoxy prime and go from there. (not done yet) I found a place in Wiltshire that will do the cab inside and out and apply 2k epoxy to protect it. Prior projects I have wire wheeled and scraped away for weeks but always regretted not going back to steel. That LS you have looks very tidy inside - I bought a used core sight unseen and it was immaculate inside - apart from a bad lifter that got swapped out - hope you get a good couple of days on it next week... Quote:
|
|
![]() |
![]() |
![]() |
#25 | |
Registered User
Join Date: Jul 2013
Location: Essex
Posts: 936
|
Re: The English are coming! Or..another C10 in the Motherland.
Quote:
The challenge comes with where do you stop... IF I paint the interior then do I blast it. If I am going to blast it do I take the windows out. If I take the windows out.... and so the snowball grows.... Fully expecting to change out some lifters and trays once I have the engine fired up but, hopefully I can put that off until I have a few miles under my belt. PLUS! I have the damn Christmas tree to pick up in Woody that has now become pretty much the only thing my daughter talks about.... Will wonder over and have a look at your build. Thanks! P. ![]()
__________________
Woody's Build - http://67-72chevytrucks.com/vboard/s...d.php?t=658621 If it goes wrong, I blame the Internet... |
|
![]() |
![]() |
![]() |
Bookmarks |
|
|