![]() |
![]() |
#251 |
Registered User
Join Date: Apr 2012
Location: Cambridge, Ontario, Canada
Posts: 1,771
|
Re: My '63 C10 "I'd rather be driving" Project
Thanks for sharing John, wish I could have made it Sunday...
__________________
Craigerrr My build thread, CRGRS 66 Winter Build: http://67-72chevytrucks.com/vboard/s...09#post5638709 |
![]() |
![]() |
![]() |
#252 | |
Registered User
Join Date: Mar 2014
Location: Cambridge, Ontario
Posts: 507
|
Re: My '63 C10 "I'd rather be driving" Project
Quote:
Yep, no problem guys. Yeah Craig, the weather wasn't great buy it was a good show. Have you been out to any shows or cruise nights? Gotta get those juices flowing! ![]()
__________________
* My 63 C10 SWB Fleetside (converted to BBW): http://67-72chevytrucks.com/vboard/s...58#post6851558 @johnny_lamebridge on Instagram ![]() |
|
![]() |
![]() |
![]() |
#253 |
Registered User
Join Date: Mar 2014
Location: Cambridge, Ontario
Posts: 507
|
Re: My '63 C10 "I'd rather be driving" Project
I took thursday and friday off to concentrate on my "home" work. I must've done a good job because saturday morning my wife gave me time off for good behaviour. We got some breakfast, then she gave me a hand to clean my C10 which has been neglected since the torrential downpour last weekend.
After that we headed for downtown Cambridge for the "Rodding for Reading" fundraising car show hosted by the Lead Kings car club. There were some cool Lead Sleds in attendance (obviously), and a real variety of hot rods, rat rods and musclecars. The only other 60-66 there was this '63 GMC Short Stepper. The body had been repainted, but the interior and drivetrain are original. It's a 6 banger, 3 on the tree. I chatted with the owner for a while. It made me realize how good we Chevy guys have it compared to GMC owners. It never dawned on me that things like fender emblems aren't reproduced for GMC's. Here's a pic... and one of a cool A100 Dodge named "Vanarchy"
__________________
* My 63 C10 SWB Fleetside (converted to BBW): http://67-72chevytrucks.com/vboard/s...58#post6851558 @johnny_lamebridge on Instagram ![]() |
![]() |
![]() |
![]() |
#254 |
Registered User
Join Date: Mar 2014
Location: Cambridge, Ontario
Posts: 507
|
Re: My '63 C10 "I'd rather be driving" Project
After the car show it was back home to install baseboard trim
![]() I'm having a lazy day today... NASCAR and Canadian Formula 1 race on the tube...
__________________
* My 63 C10 SWB Fleetside (converted to BBW): http://67-72chevytrucks.com/vboard/s...58#post6851558 @johnny_lamebridge on Instagram ![]() |
![]() |
![]() |
![]() |
#255 |
Registered User
![]() Join Date: Feb 2015
Location: Belmont Ontario Canada
Posts: 418
|
Re: My '63 C10 "I'd rather be driving" Project
You are looking good man...LOL
|
![]() |
![]() |
![]() |
#256 |
Check The Champ, Demonstrator
![]() Join Date: Jun 2009
Location: Montreal,Quebec
Posts: 6,627
|
Re: My '63 C10 "I'd rather be driving" Project
Safety Croc's ?
__________________
1963 Chevrolet Truck Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original Chevrolet Truck Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1 |
![]() |
![]() |
![]() |
#257 |
Registered User
Join Date: Oct 2014
Location: Kitchener, Ontario, Canada
Posts: 3,254
|
Re: My '63 C10 "I'd rather be driving" Project
You don't look spent, you look dead. I sounds like a good show. My pinstriper Adam was there as well. Guess I should have put off my outside chores again and gone to that show.
__________________
http://67-72chevytrucks.com/vboard/s...d.php?t=648459 https://67-72chevytrucks.com/vboard/...d.php?t=769441 1951 MG TD 1967 Jeep CJ5 1.9L TDI 33X13.5X15 Mud Grapplers. 1952 GMC 9700 p/u 7.3L diesel on air, dually |
![]() |
![]() |
![]() |
#258 |
Senior Member
![]() Join Date: Oct 2009
Location: Fayetteville, Arkansas
Posts: 1,923
|
Re: My '63 C10 "I'd rather be driving" Project
take a break... you deserve it. room looks good and you saved a bunch by being the carpenter...
|
![]() |
![]() |
![]() |
#259 | ||
Registered User
Join Date: Mar 2014
Location: Cambridge, Ontario
Posts: 507
|
Re: My '63 C10 "I'd rather be driving" Project
Ha! Unfortunately, I look a lot more "curvy" when Im standing upright.
![]() I was careful not to shoot myself in the foot. Mind you... I could use a little more time off work. Quote:
Quote:
![]()
__________________
* My 63 C10 SWB Fleetside (converted to BBW): http://67-72chevytrucks.com/vboard/s...58#post6851558 @johnny_lamebridge on Instagram ![]() |
||
![]() |
![]() |
![]() |
#260 |
Registered User
Join Date: Mar 2014
Location: Cambridge, Ontario
Posts: 507
|
Re: My '63 C10 "I'd rather be driving" Project
I'm finding some spare time again finally to play around with some things that were on the back burner. I whipped up a soda blaster to play around with. It worked really well cleaning up this dirty old Quadrajet that I'm going to try on my 283. I'll mount it to an Edelbrock Performer intake that I picked up at a swap meet for $30.
__________________
* My 63 C10 SWB Fleetside (converted to BBW): http://67-72chevytrucks.com/vboard/s...58#post6851558 @johnny_lamebridge on Instagram ![]() |
![]() |
![]() |
![]() |
#261 |
Registered User
Join Date: Mar 2014
Location: Cambridge, Ontario
Posts: 507
|
Re: My '63 C10 "I'd rather be driving" Project
Another job I've been trying to get to, was a custom shifter handle to replace the ugly S10 handle.
I've never been one to name my vehicles, but given the hassles I encountered when I bought my C10 in Florida, I've decided that "Problem Child" would be a good name. It also doesn't hurt that there's an ACDC song of the same name. ![]() Here's what I came up with... stainless steel. I just need to get it mounted, then polish it like chrome.
__________________
* My 63 C10 SWB Fleetside (converted to BBW): http://67-72chevytrucks.com/vboard/s...58#post6851558 @johnny_lamebridge on Instagram ![]() Last edited by Johnny_Lamebridge; 07-05-2016 at 09:55 AM. Reason: Added a pic |
![]() |
![]() |
![]() |
#262 |
Registered User
Join Date: Jun 2014
Location: dresden , ontario
Posts: 628
|
Re: My '63 C10 "I'd rather be driving" Project
Nice shifter John. Cool name for the truck. You must have access to some nice machinery to cut those letters. How about some more info on the homemade soda blaster
__________________
Dale ---------------- My suburban's Twisted Little Sister http://67-72chevytrucks.com/vboard/s...d.php?t=655167 |
![]() |
![]() |
![]() |
#263 |
Senior Member
![]() ![]() Join Date: Oct 2011
Location: Wolfforth, Texas
Posts: 976
|
Re: My '63 C10 "I'd rather be driving" Project
That shifter is sweet!
__________________
Craig 1966 Chevrolet C10 - Supercharged LS3 1968 Chevrolet Camaro 1957 Chevrolet 2dr Hardtop "It makes sence if you don't think about it" ![]() Mesquite 1966 C10 - LS3 W/ Air Ride http://67-72chevytrucks.com/vboard/s...=1#post4989763 |
![]() |
![]() |
![]() |
#264 |
Registered User
Join Date: Mar 2014
Location: Cambridge, Ontario
Posts: 507
|
Re: My '63 C10 "I'd rather be driving" Project
Dale, I do everything with a hammer and chisel.
![]() I don't have any pics of the soda blaster with me, but there's all kinds of info on youtube. Just google "DIY Sodablaster" and you'll find lots of videos like this: https://www.youtube.com/watch?v=5vuENNhOMQs I started out with just a simple blowgun that you stick the end of the nozzle thru a plastic syphon tube to create a venturi. Just stick the other end of the tube in a box of baking soda and you have a soda blaster. It worked ok, but I found I had to keep fiddling with it to keep a steady suction. I tried a couple different air/water spray guns that worked way better, because they already have a suction connection to draw up the water or cleaning solution. I added an empty orange juice container that has a handle, and stuck a 5/16 metal tube into the lowest point to draw up the soda. It works pretty well. I ended up with a gun like the one below which is nice because the nozzle at the discharge end is adjustable, so I can increase or decrease the amount of baking soda going thru. I imagine you could also use a sandblasting setup, and just use soda instead. ???
__________________
* My 63 C10 SWB Fleetside (converted to BBW): http://67-72chevytrucks.com/vboard/s...58#post6851558 @johnny_lamebridge on Instagram ![]() |
![]() |
![]() |
![]() |
#265 |
Registered User
Join Date: Dec 2012
Location: Rochester, KENT
Posts: 10,528
|
Re: My '63 C10 "I'd rather be driving" Project
I suddenly find myself wanting a floor shifter......
That has come out great John.
__________________
MY BUILD LINK: http://67-72chevytrucks.com/vboard/s...585901]Redneck Express - 1966 C10 Short Fleetside MY USA ROADTRIPS http://forum.retro-rides.org/thread/...2018-humdinger IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM MATE. |
![]() |
![]() |
![]() |
#266 |
Registered User
Join Date: Apr 2012
Location: Cambridge, Ontario, Canada
Posts: 1,771
|
Re: My '63 C10 "I'd rather be driving" Project
Shifter looks great there neighbor!
If you are around, and out and about this weekend pop by with your truck for a beer..
__________________
Craigerrr My build thread, CRGRS 66 Winter Build: http://67-72chevytrucks.com/vboard/s...09#post5638709 |
![]() |
![]() |
![]() |
#267 | |
Registered User
Join Date: Mar 2014
Location: Cambridge, Ontario
Posts: 507
|
Re: My '63 C10 "I'd rather be driving" Project
Quote:
![]() ![]()
__________________
* My 63 C10 SWB Fleetside (converted to BBW): http://67-72chevytrucks.com/vboard/s...58#post6851558 @johnny_lamebridge on Instagram ![]() |
|
![]() |
![]() |
![]() |
#268 |
Registered User
Join Date: Oct 2014
Location: Kitchener, Ontario, Canada
Posts: 3,254
|
Re: My '63 C10 "I'd rather be driving" Project
Ya Adam is a great guy and has an awsome eye for what to do. Love the shifter John, the name really does suit the truck and yes great song. You should bring Craig buy my place Saturday for a BEER.
__________________
http://67-72chevytrucks.com/vboard/s...d.php?t=648459 https://67-72chevytrucks.com/vboard/...d.php?t=769441 1951 MG TD 1967 Jeep CJ5 1.9L TDI 33X13.5X15 Mud Grapplers. 1952 GMC 9700 p/u 7.3L diesel on air, dually |
![]() |
![]() |
![]() |
#269 |
Registered User
Join Date: Mar 2014
Location: Cambridge, Ontario
Posts: 507
|
Re: My '63 C10 "I'd rather be driving" Project
It ended up being coffee on Sunday morning, but it was good talking and exchanging ideas. Fun little ride in my C10 to the coffee shop too... lol.
Craig couldn't make it, but my wife Gayle and I dropped in to Bob's (Lower50s) open house & BBQ. Bob and his GF Heather did a great job preparing all the food. The pulled pork was on point! I didn't know anyone there, but after speaking to Bob's dad and Heather's parents we found that we knew some of the same people. I asked Heather's mom about the Charlotte Motor Speedway jacket she was wearing, and we ended up having a nice chat about all the Nascar races she and her husband attend every year, towing their 5th wheel trailer. Heather's dad then told me he used to race Vintage Modifieds (and others) for a few years in the 70's, and he knew and raced against some of the oldtimers in the car club I belong to, The Motor Lords. As it turns out, when he gave up racing he sold his '37 Ford race car to my buddy Jim, a club member. Jim rebuilt the car completely and raced it for many years until he retired. He still has the car in pristine condition. Back then, these cars were required to run an inline 6 or a flathead V8. What a sound with 25-30 of these six bangers buzzing around the track! Nowadays, they're allowed to run crate 350's, but some guys have stuck with built 6's. Small world sometimes... Thanks again, Bob & Heather! I found (stole ![]()
__________________
* My 63 C10 SWB Fleetside (converted to BBW): http://67-72chevytrucks.com/vboard/s...58#post6851558 @johnny_lamebridge on Instagram ![]() |
![]() |
![]() |
![]() |
#270 |
Registered User
Join Date: Mar 2014
Location: Cambridge, Ontario
Posts: 507
|
Re: My '63 C10 "I'd rather be driving" Project
Earlier on Saturday, I got my shifter welded up, polished, and installed. I cut off the original handle, beveled the stump and the new handle, then laid down a root pass. I reassembled the shifter and tried it in the truck. I made a little adjustment, took it apart again, then welded 'er up. A couple hours polishing and it looks pretty good imho.
The new handle is a few inches longer than the bent S10 handle, but not too bad as I had previously modified my shifter to shorten the throw. It feels way more solid now being that its all metal. ![]()
__________________
* My 63 C10 SWB Fleetside (converted to BBW): http://67-72chevytrucks.com/vboard/s...58#post6851558 @johnny_lamebridge on Instagram ![]() |
![]() |
![]() |
![]() |
#271 |
Senior Member
![]() Join Date: Jun 2010
Location: Orlando, Florida
Posts: 2,508
|
Re: My '63 C10 "I'd rather be driving" Project
The shifter looks great! Much more period correct.
__________________
71 Chevy C10 Shortbed Stepside. LT1 with 4l60E. Just got back from painter, in assembly now. |
![]() |
![]() |
![]() |
#272 |
Registered User
Join Date: Oct 2014
Location: Kitchener, Ontario, Canada
Posts: 3,254
|
Re: My '63 C10 "I'd rather be driving" Project
Wow John you are too kind. Heather and I are glad you and Gayle came to enjoy our 3rd annual open house. It is amazing how small the world really is sometimes.
Your shifter looks even better in person.
__________________
http://67-72chevytrucks.com/vboard/s...d.php?t=648459 https://67-72chevytrucks.com/vboard/...d.php?t=769441 1951 MG TD 1967 Jeep CJ5 1.9L TDI 33X13.5X15 Mud Grapplers. 1952 GMC 9700 p/u 7.3L diesel on air, dually |
![]() |
![]() |
![]() |
#273 |
Registered User
Join Date: Jul 2013
Location: Essex
Posts: 936
|
Re: My '63 C10 "I'd rather be driving" Project
Not checked in for a while Johnny and seem to have missed a huge amount! Shifter looks very good, nice work Sir!
P. ![]()
__________________
Woody's Build - http://67-72chevytrucks.com/vboard/s...d.php?t=658621 If it goes wrong, I blame the Internet... |
![]() |
![]() |
![]() |
#274 |
Check The Champ, Demonstrator
![]() Join Date: Jun 2009
Location: Montreal,Quebec
Posts: 6,627
|
Re: My '63 C10 "I'd rather be driving" Project
The only problem now is all the people doing internet searches for the PROBLEM CHILD Shifter Co. website!
__________________
1963 Chevrolet Truck Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original Chevrolet Truck Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1 |
![]() |
![]() |
![]() |
#275 | |
Registered User
Join Date: Mar 2014
Location: Cambridge, Ontario
Posts: 507
|
Re: My '63 C10 "I'd rather be driving" Project
Thanks for the kind words Guys...
Quote:
![]()
__________________
* My 63 C10 SWB Fleetside (converted to BBW): http://67-72chevytrucks.com/vboard/s...58#post6851558 @johnny_lamebridge on Instagram ![]() |
|
![]() |
![]() |
![]() |
Bookmarks |
|
|