![]() |
![]() |
#251 |
Registered User
Join Date: May 2011
Location: Anderson SC
Posts: 3,890
|
Re: '55 International Metal/Body/Paint Work
Park lights installed.
![]() Added foam around the edges of the cowl vent tray. ![]() Buffed out the cowl vent. ![]() Cowl vent seal trimmed to fit and glued in place, then treated with Duragloss. ![]() Seal added around the trans cover and floor panel, then bolted them in place. ![]() ![]() Cowl vent and hood seal installed. ![]() Heater bolted up to test fit, gotta pull it to add the firewall pad. ![]() Headlights and park lights wired up so we could get the front fenders and grill bolted on. Forgot the splash pan behind the grill so we gotta pull the grill back off. ![]()
__________________
Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc |
![]() |
![]() |
![]() |
#252 |
Registered User
Join Date: Feb 2007
Location: Marana, Arizona
Posts: 3,418
|
Re: '55 International Metal/Body/Paint Work
Love the IH of course. But are you holding out on us? Cougar project?
__________________
"I feel the need for speed!"... as soon as I am done with my nap. |
![]() |
![]() |
![]() |
#253 |
Registered User
Join Date: Apr 2012
Location: Beaver, Pa.
Posts: 197
|
Re: '55 International Metal/Body/Paint Work
Looking reeealy good!
|
![]() |
![]() |
![]() |
#254 |
Registered User
Join Date: Jun 2013
Location: Somewhere
Posts: 3,082
|
Re: '55 International Metal/Body/Paint Work
Can I send you my POS Camaro!?
|
![]() |
![]() |
![]() |
#255 |
Registered User
![]() Join Date: May 2007
Location: Deale Md
Posts: 4,663
|
Re: '55 International Metal/Body/Paint Work
Attention to detail and perfection, ah just a normal day in the life of theastronaut.
__________________
James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change! |
![]() |
![]() |
![]() |
#256 | ||
Registered User
Join Date: May 2011
Location: Anderson SC
Posts: 3,890
|
Re: '55 International Metal/Body/Paint Work
Quote:
Thanks! Sure, donations are welcome! ![]() ![]() Quote:
__________________
Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc |
||
![]() |
![]() |
![]() |
#257 |
Registered User
Join Date: May 2011
Location: Anderson SC
Posts: 3,890
|
Re: '55 International Metal/Body/Paint Work
Cut the fender beading to length and trimmed the ends to match the panel edges. The top one was rounded off where it ends, thought that would look nicer than a straight cut.
![]() ![]() Helped the owner with the headlight wiring. He's down for a couple weeks to help with reassembly. ![]() ![]() Detailed the tires using 303 Aerospace Protectant. I've been using Duragloss with good results but the owner brought this stuff and wanted to use it. Seems like a good product, goes on a little thicker than Duragloss. Not greasy or glossy, has the perfect amount of sheen. ![]() Started re-rewiring the turn signal switch. The owner and one of his buddy's had attempted it but didn't have all the wires, and they ones that were there weren't in the right spots. Ever tried to look up a '55 International wiring diagram? ![]() ![]() ![]() Everything back together and working properly. Also test fit the hood and adjusted the grill support panel up about an inch to get the hood to fall where it needed to be. ![]() ![]()
__________________
Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc |
![]() |
![]() |
![]() |
#258 |
Registered User
![]() Join Date: May 2007
Location: Deale Md
Posts: 4,663
|
Re: '55 International Metal/Body/Paint Work
Looking good, won't be long you will have room for another project.
__________________
James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change! |
![]() |
![]() |
![]() |
#259 |
Registered User
Join Date: May 2011
Location: Anderson SC
Posts: 3,890
|
Re: '55 International Metal/Body/Paint Work
Hopefully it'll be gone in a couple months! Still gotta paint the bed and buff it, and work out the rest of the issues. There's always issues that pop up during final assembly!
__________________
Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc |
![]() |
![]() |
![]() |
#260 |
Registered User
Join Date: May 2011
Location: Anderson SC
Posts: 3,890
|
Re: '55 International Metal/Body/Paint Work
The new heater switch didn't match the old switch so I had to rework the switch and knob to get them to fit together.
Before cleaning the pieces. ![]() Different shafts. ![]() Soldered a nut on the original knob, then filed the excess solder away and buffed the joint. Not the best looking fix but it's reversable if anyone ever wanted to go back to the original style switch. ![]() ![]() Installed in the dash. ![]() Heater wires hooked up. The ground wire will be hidden by the firewall pad. ![]() ![]() Cleaned and packed the door glass regulator spring with fresh grease. ![]() It had steel rollers so they were cleaned with a wire wheel and greased. ![]() The gear box was flushed with carb cleaner to get the old lube and grit out. The parts I could get to got slathered with axle grease, and inside the gear housing was soaked with spray lithium grease. ![]() Bottom door seal installed and detailed. ![]() The door catch plates were pretty chewed up from years of use, so I smoothed the rough edges before blasting, painting, and installing with new hardware. ![]() ![]() ![]() Same process on the door latches. ![]() Window channels were blasted and painted. ![]() Passenger door installed. ![]()
__________________
Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc |
![]() |
![]() |
![]() |
#261 |
Registered User
Join Date: May 2011
Location: Anderson SC
Posts: 3,890
|
Re: '55 International Metal/Body/Paint Work
The floor mat, firewall pad, kick panels, and headliner came in late yesterday.
![]() Finishing up the heater wiring; added quick disconnect sockets to pull the heater easier next time. ![]() Wiring hidden behind the firewall pad. ![]() Extra insulation in the roof. Should be pretty cool with around .040" thick Lizard skin ceramic insulation already on it. ![]() Heater installed. ![]() More floor insulation, trimmed it to fit and glued it down. ![]() Jute-type padding added. ![]() ![]() Test fitting the floor mat, needs to be stretched in a few spots to fit better. ![]()
__________________
Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc |
![]() |
![]() |
![]() |
#262 |
Registered User
Join Date: May 2011
Location: Anderson SC
Posts: 3,890
|
Re: '55 International Metal/Body/Paint Work
Got the windshield and left door installed.
![]() Bed is wetsanded and ready to shoot. Should have paint on it today. ![]() ![]() ![]()
__________________
Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc |
![]() |
![]() |
![]() |
#263 |
Registered User
Join Date: May 2011
Location: Anderson SC
Posts: 3,890
|
Re: '55 International Metal/Body/Paint Work
__________________
Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc |
![]() |
![]() |
![]() |
#264 |
Registered User
Join Date: Apr 2012
Location: Beaver, Pa.
Posts: 197
|
Re: '55 International Metal/Body/Paint Work
This is getting exciting!
|
![]() |
![]() |
![]() |
#265 |
Registered User
Join Date: May 2011
Location: Anderson SC
Posts: 3,890
|
Re: '55 International Metal/Body/Paint Work
Yes it is!! It's looking like a truck again with the bed installed! It'll be off to get the bed shot with color matched Line-X next week. We've started building the vent glasses so we'll have the doors assemble soon. Gotta sand/buff the bed, install the running boards, and finish up a bunch of small details before it's ready to go home.
![]() ![]()
__________________
Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc |
![]() |
![]() |
![]() |
#266 |
Registered User
![]() Join Date: May 2007
Location: Deale Md
Posts: 4,663
|
Re: '55 International Metal/Body/Paint Work
Oh yeah it's looking good.
__________________
James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change! |
![]() |
![]() |
![]() |
#267 |
Registered User
Join Date: Mar 2008
Location: Waukee, Iowa
Posts: 1,608
|
Re: '55 International Metal/Body/Paint Work
Is the bedliner going to be sprayed over the bedrails? If so, where will it be taped off?
__________________
build threads: 86 Suburban 88 Jeep 6.0 swap 49 Chevy truck 54 Chevy wagon 86 Suburban lowered 4/6 54 Chevy wagon 49 Chevy/s10 mix 88 Jeep Wrangler rockcrawler |
![]() |
![]() |
![]() |
#268 |
Registered User
![]() Join Date: Mar 2005
Location: apple valley, ca
Posts: 2,670
|
Re: '55 International Metal/Body/Paint Work
Wow!!! That looks great!
You rarely ever see Internationals of that era around here, and that's by far the nicest one I have ever seen. The fit and finish of that truck is top notch.
__________________
Check out my latest endeavor: https://roundsixpod.com My build threads: '55 Chevy: http://67-72chevytrucks.com/vboard/s...d.php?t=247512 '64 C-20: http://67-72chevytrucks.com/vboard/s...d.php?t=446527 |
![]() |
![]() |
![]() |
#269 |
Registered User
Join Date: Oct 2009
Location: canton ga
Posts: 12,728
|
Re: '55 International Metal/Body/Paint Work
WOW ,that is looking goooooood .
|
![]() |
![]() |
![]() |
#270 |
Artist
![]() Join Date: Jan 2010
Location: Rockwell NC
Posts: 422
|
Re: '55 International Metal/Body/Paint Work
You guys really do stellar work!
__________________
66 Chevy C10 283ci~cough~ SBW Fleet Buttercup '66 |
![]() |
![]() |
![]() |
#271 | ||
Registered User
Join Date: May 2011
Location: Anderson SC
Posts: 3,890
|
Re: '55 International Metal/Body/Paint Work
Thanks!
Quote:
Quote:
Appreciate it dudes!!
__________________
Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc |
||
![]() |
![]() |
![]() |
#272 | |
Registered User
Join Date: Nov 2012
Location: Spruce Pine NC
Posts: 12
|
Re: '55 International Metal/Body/Paint Work
Quote:
|
|
![]() |
![]() |
![]() |
#273 |
Registered User
Join Date: May 2011
Location: Anderson SC
Posts: 3,890
|
Re: '55 International Metal/Body/Paint Work
Got the bed and running boards back from Line-X... Not happy with how it turned out but there's too much risk in stripping it and starting over. They shot regular black liner with a thin top coat of red, and the black is showing through on the peaks of the texture. If it gets scratched them the black liner will show through. It's supposed to be a tinted texture coat, and a colored top coat to match. I guess if the owner is happy we'll leave it alone, it just sucks to spend that much time to get the bed as perfect as possible and they don't do their best. Used them twice before with great results, not sure what happened this time. It looks fine from ten feet, but the thin red top coat barely covering the black texture is noticeable up close. It was suppose to be satin instead of gloss too...
Rant over, on to the pics. ![]() ![]() ![]() ![]()
__________________
Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc |
![]() |
![]() |
![]() |
#274 |
Registered User
![]() Join Date: May 2007
Location: Deale Md
Posts: 4,663
|
Re: '55 International Metal/Body/Paint Work
Sounds like you need to have a talk with the owner of the company you are using to spray the bed lining and express if they would like to keep your business.
__________________
James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change! |
![]() |
![]() |
![]() |
#275 |
Registered User
Join Date: Apr 2011
Location: .
Posts: 3,104
|
Re: '55 International Metal/Body/Paint Work
Truck looks great. Don't think the owner is going to haul fire wood in the bed. Should be okay.
The work you did on the truck is 110% that should cover you. Spray in bed liner guy not gettin my business. |
![]() |
![]() |
![]() |
Bookmarks |
|
|